Sp@ro , mon Syno est un DS 109, DSM 2.3 (le dernier)
Pour ce qui est du dmesg :
DiskStation> dmesg
0: c7c37200
PCI: bus0: Fast back to back transfers enabled
SCSI subsystem initialized
libata version 3.00 loaded.
NET: Registered protocol family 2
Time: kw_clocksource clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4096K
Use the XOR engines (acceleration) for enhancing the following functions:
o RAID 5 Xor calculation
o kernel memcpy
o kenrel memzero
Number of XOR engines to use: 4
cesadev_init(c001185c)
mvCesaInit: sessions=10240, queue=64, pSram=f0000000
MV Buttons Driver Load
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.5 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
loop: module loaded
Load Marvell Ethernet Driver
o Cached descriptors in DRAM
o DRAM SW cache-coherency
o Single RX Queue support - ETH_DEF_RXQ=0
o Single TX Queue support - ETH_DEF_TXQ=0
o TCP segmentation offload enabled
o Receive checksum offload enabled
o Transmit checksum offload enabled
o Rx descripors: q0=128
o Tx descripors: q0=532
o Loading network interface:
eth0
Driver 'sd' needs updating - please use bus_type methods
Integrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access WDC WD1001FALS-00J7B 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
physmap platform flash device: 00400000 at f8000000
SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB)
Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000
6 RedBoot partitions found on MTD device SYNOMTD-0
SYNOMTD flash bank 0: Using RedBoot partition definition
Creating 6 MTD partitions on "SYNOMTD-0":
0x00000000-0x00080000 : "RedBoot"
0x00080000-0x00280000 : "zImage"
0x00280000-0x003c0000 : "rd.gz"
0x003c0000-0x003d0000 : "vendor"
vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
Serial Number: 97F3N00770
0x003d0000-0x003f0000 : "RedBoot Config"
0x003f0000-0x00400000 : "FIS directory"
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 103 MB/s
raid6: int32x2 118 MB/s
raid6: int32x4 124 MB/s
raid6: int32x8 111 MB/s
raid6: using algorithm int32x4 (124 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ds109_synobios: module license 'Synology Inc.' taints kernel.
synobios: load, major number 201
Brand: Synology
Model: DS-109
synobios: unload
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... okay
Freeing init memory: 116K
Adding 522104k swap on /dev/hda2. Priority:-1 extents:1 across:522104k
NET: Registered protocol family 5
NTFS driver 2.1.29 [Flags: R/O MODULE].
sd 0:0:0:0: Attached scsi generic sg0 type 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver snd-usb-audio
PPP generic driver version 2.4.2
Installing knfsd (copyright © 1996 okir@monad.swb.de).
fuse init (API version 7.9)
encryptfs using the OCF package.
synobios: load, major number 201
Brand: Synology
Model: DS-109
eth0: mac address changed
eth0: started
eth0: link down
eth0: link up, full duplex, speed 100 Mbps
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usb 1-1: new high speed USB device using ehci_marvell and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Got empty serial number. Generate serial number from product.
usb 1-1.1: new full speed USB device using ehci_marvell and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
ALSA mixer_oss.c:1393: usbaudio: Audio Volume set to 50 (50)
Got empty serial number. Generate serial number from product.
usb 1-1.2: new full speed USB device using ehci_marvell and address 4
usb 1-1.2: configuration #1 chosen from 1 choice
ALSA mixer_oss.c:1393: usbaudio: Audio Volume set to 50 (50)
Got empty serial number. Generate serial number from product.
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblp
usbcore: registered new interface driver hiddev
input: USBDevice as /class/input/input0
Get empty minor:104
input,hiddev104: USB HID v1.00 Device [uSBDevice] on usb-ehci_marvell.70059-1.2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
findhostd uses obsolete (PF_INET,SOCK_PACKET)
usb 1-1.1: USB disconnect, address 3
usb 1-1.3: new full speed USB device using ehci_marvell and address 5
usb 1-1.3: configuration #1 chosen from 1 choice
ALSA mixer_oss.c:1393: usbaudio: Audio Volume set to 62 (62)
Got empty serial number. Generate serial number from product.
Pour info j'ai aussi un lance missile si tu as besoin de testeur.
Merci pour ton aide
