kfar

Salut !! As tu réussi l'install de ton serveur Xmpp ??? Je voulais installer la meme chose mais j'ai trouver ca trop compliquer. @+

Bonjour

Up Personne a une idée ??? Edit : Je réussi a résoudre une parti de mon problème c'est à dire le lancement au demarrage du syno !! Maintenant ca fonctionne super bien !! Il me reste plus qu'à touver c'est quoi ce problème de luminosité.

Bonjour

j ai un probleme pour mettre le script au demarrage car apres la webcam apparait en deconnecter !!! est ce que quelqu un peut m aider ??? merci d avance

bon alors moi je dis chapeau bas a sp@ro car j ai reussi a me d

Sp@ro tu m'a oubli

j'attends de tes nouvelles !!!

Super merci beaucoup

salut Alors voila ou j'en suis : J'ai installer le bootstrap et pour le faire j'ai suivi ce tuto (http://syno.haeflinger.com/index.php/DS110J) tout c'est bien passer !!! puis j'ai modifier /etc/profile ensuite J'ai installer le paquet openssh-sftp-server (ipkg install openssh-sftp-server) tout c'est bien passer aussi J'ai modifier /etc/passwd mais j'ai toujours l'erreur : "error looking up user group - Command 'groups' failed with return code 127 and error message -ash: groups: not found." avec winscp quelqu'un aurait une idée ??? Y a t il une commande pour lancer openssh-sftp-server ??

j'ai lu sur un forum qu'il fallait ov518.ko enfin je ne sais pas mais j'

ok je vais suivre ce tuto http://syno.haeflinger.com/index.php/DS110J mais ma question est de savoir si ce fichier (http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/syno-mvkw-bootstrap_1.2-7_arm.xsh) est il compatible avec mon mat

Ou puis je le trouver ??? et comment ca s'intall ??? Ca je crois que je peux le faire !! ok Ca me parait un peu compliqué mais à quoi ressemble le dernier champ (histoire que je ne modifie pas n'importe quoi) Encore merci pour votre aide

salut

salut Voila le retour de la commande dmesg sous ubuntu live cd Linux video capture interface: v2.00 [ 94.157017] ov511: USB OV518 video device found [ 94.158083] ov511: Device revision 1 [ 94.170074] ov511: Compression required with OV518...enabling [ 95.540159] ov511: Sensor is an OV6630AF [ 95.743241] ov511: Device at usb-0000:00:1a.0-1 registered to minor 0 [ 95.743282] usbcore: registered new interface driver ov511 [ 95.743287] ov511: v1.64 for Linux 2.5 : ov511 USB Camera Driver

ok je vois ca demain avec un live cd ubuntu !!!

Merci voici le retour des commande demandées : lsmod : Module Size Used by Tainted: P ov511 69192 0 pwc 80708 0 v4l2_common 16832 0 videodev 37824 3 ov511,pwc,v4l2_common v4l1_compat 14404 1 videodev usbhid 26628 0 hid 32004 1 usbhid usblp 11808 0 usb_storage 37056 0 uhci_hcd 20812 0 ohci_hcd 18116 0 ehci_hcd 33516 0 xt_state 1952 1 xt_tcpudp 2880 0 xt_multiport 2976 1 ipt_REDIRECT 1632 0 iptable_nat 5316 0 nf_nat 14934 2 ipt_REDIRECT,iptable_nat nf_conntrack_ipv4 7748 3 iptable_nat nf_conntrack 49064 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_filter 2208 1 ip_tables 10216 2 iptable_nat,iptable_filter x_tables 11204 6 xt_state,xt_tcpudp,xt_multiport,ipt_REDIRECT,iptable_nat,ip_tables ds110j_synobios 19448 0 ecryptfs 95956 0 isofs 32360 0 udf 86924 0 zlib_inflate 14912 1 isofs fuse 46772 0 nfsd 90628 1 exportfs 3616 1 nfsd ppp_async 8992 0 crc_ccitt 1696 1 ppp_async ppp_generic 18900 1 ppp_async slhc 5632 1 ppp_generic snd_pcm_oss 38432 0 snd_mixer_oss 15072 1 snd_pcm_oss snd_usb_audio 81796 0 snd_pcm 66148 2 snd_pcm_oss,snd_usb_audio snd_timer 19268 1 snd_pcm snd_hwdep 6980 1 snd_usb_audio snd_usb_lib 16672 1 snd_usb_audio snd_rawmidi 20160 1 snd_usb_lib snd_seq_device 6796 1 snd_rawmidi snd 46392 9 snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usb_lib,snd_rawmidi,snd_seq_device snd_page_alloc 7272 1 snd_pcm soundcore 5860 1 snd quota_v2 8832 2 usbcore 120468 11 ov511,pwc,usbhid,usblp,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib sg 27296 0 ntfs 98788 0 vfat 10304 0 fat 47132 1 vfat appletalk 29868 20 psnap 2916 1 appletalk llc 5716 1 psnap dmesg : usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Linux video capture interface: v2.00 pwc: Philips webcam module version 10.0.13 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usbcore: registered new interface driver Philips webcam findhostd uses obsolete (PF_INET,SOCK_PACKET) eth0: link down eth0: link up, full duplex, speed 100 Mbps eth0: link down eth0: link up, full duplex, speed 100 Mbps usb 1-1.2: USB disconnect, address 3 usbcore: registered new interface driver ov511 ov511: v1.64 for Linux 2.5:ov511 USB Camera Driver usb 1-1.1: new full speed USB device using ehci_marvell and address 4 usb 1-1.1: configuration #1 chosen from 1 choice Got empty serial number. Generate serial number from product. J'attends tes instruction Sp@ro

lsmod Module Size Used by Tainted: P pwc 80708 0 v4l2_common 16832 0 videodev 37824 2 pwc,v4l2_common v4l1_compat 14404 1 videodev usbhid 26628 0 hid 32004 1 usbhid usblp 11808 0 usb_storage 37056 0 uhci_hcd 20812 0 ohci_hcd 18116 0 ehci_hcd 33516 0 xt_state 1952 1 xt_tcpudp 2880 0 xt_multiport 2976 1 ipt_REDIRECT 1632 0 iptable_nat 5316 0 nf_nat 14934 2 ipt_REDIRECT,iptable_nat nf_conntrack_ipv4 7748 3 iptable_nat nf_conntrack 49064 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_filter 2208 1 ip_tables 10216 2 iptable_nat,iptable_filter x_tables 11204 6 xt_state,xt_tcpudp,xt_multiport,ipt_REDIRECT,iptable_nat,ip_tables ds110j_synobios 19448 0 ecryptfs 95956 0 isofs 32360 0 udf 86924 0 zlib_inflate 14912 1 isofs fuse 46772 0 nfsd 90628 1 exportfs 3616 1 nfsd ppp_async 8992 0 crc_ccitt 1696 1 ppp_async ppp_generic 18900 1 ppp_async slhc 5632 1 ppp_generic snd_pcm_oss 38432 0 snd_mixer_oss 15072 1 snd_pcm_oss snd_usb_audio 81796 0 snd_pcm 66148 2 snd_pcm_oss,snd_usb_audio snd_timer 19268 1 snd_pcm snd_hwdep 6980 1 snd_usb_audio snd_usb_lib 16672 1 snd_usb_audio snd_rawmidi 20160 1 snd_usb_lib snd_seq_device 6796 1 snd_rawmidi snd 46392 9 snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_timer,snd_hwdep,snd_usb_lib,snd_rawmidi,snd_seq_device snd_page_alloc 7272 1 snd_pcm soundcore 5860 1 snd quota_v2 8832 2 usbcore 120468 10 pwc,usbhid,usblp,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd,snd_usb_audio,snd_usb_lib sg 27296 0 ntfs 98788 0 vfat 10304 0 fat 47132 1 vfat appletalk 29868 20 psnap 2916 1 appletalk llc 5716 1 psnap j'ai d

salut Sp@ro Et merci pour ton aide !! Voici le retour des dmesg : ize 4MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Detected Tclk 200000000 and SysClk 400000000 MV Buttons Device Load Marvell USB EHCI Host controller #0: c7c37200 PCI: bus0: Fast back to back transfers enabled SCSI subsystem initialized libata version 3.00 loaded. NET: Registered protocol family 2 Time: kw_clocksource clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4096K Use the XOR engines (acceleration) for enhancing the following functions: o RAID 5 Xor calculation o kernel memcpy o kenrel memzero Number of XOR engines to use: 4 cesadev_init(c001185c) mvCesaInit: sessions=10240, queue=64, pSram=f0000000 MV Buttons Driver Load VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) async_tx: api initialized (sync-only) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.5 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize loop: module loaded Load Marvell Ethernet Driver o Cached descriptors in DRAM o DRAM SW cache-coherency o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload enabled o Receive checksum offload enabled o Transmit checksum offload enabled o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface: eth0 Driver 'sd' needs updating - please use bus_type methods Integrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi 0:0:0:0: Direct-Access Hitachi HDP725050GLA360 GM4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk physmap platform flash device: 00400000 at f8000000 SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB) Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000 6 RedBoot partitions found on MTD device SYNOMTD-0 SYNOMTD flash bank 0: Using RedBoot partition definition Creating 6 MTD partitions on "SYNOMTD-0": 0x00000000-0x00080000 : "RedBoot" 0x00080000-0x00280000 : "zImage" 0x00280000-0x003c0000 : "rd.gz" 0x003c0000-0x003d0000 : "vendor" vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Serial Number: A4G8N00037 0x003d0000-0x003f0000 : "RedBoot Config" 0x003f0000-0x00400000 : "FIS directory" md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 73 MB/s raid6: int32x2 MB/s raid6: int32x4 83 MB/s raid6: int32x8 74 MB/s raid6: using algorithm int32x4 (83 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com dm_crypt using the OCF package. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ds110j_synobios: module license 'Synology Inc.' taints kernel. synobios: load, major number 201 Brand: Synology Model: DS-110j synobios: unload kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 116K Adding 2097136k swap on /dev/hda2. Priority:-1 extents:1 across:2097136k NET: Registered protocol family 5 NTFS driver 2.1.29 [Flags: R/O MODULE]. sd 0:0:0:0: Attached scsi generic sg0 type 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver snd-usb-audio PPP generic driver version 2.4.2 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.9) encryptfs using the OCF package. synobios: load, major number 201 Brand: Synology Model: DS-110j eth0: mac address changed eth0: started eth0: link down eth0: link up, full duplex, speed 100 Mbps kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (2048 buckets, 8192 max) ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 usb 1-1: new high speed USB device using ehci_marvell and address 2 Initializing USB Mass Storage driver... usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected Got empty serial number. Generate serial number from product. usb 1-1.1: new full speed USB device using ehci_marvell and address 3 usb 1-1.1: configuration #1 chosen from 1 choice Got empty serial number. Generate serial number from product. usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usblp usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Linux video capture interface: v2.00 pwc: Philips webcam module version 10.0.13 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usbcore: registered new interface driver Philips webcam findhostd uses obsolete (PF_INET,SOCK_PACKET) /dev/video0 existe bien avec rw-r--r-- comme permission !! @++

Salut Merci au modo qui a validé le pwc.ko J'ai suivi ton tuto à la lettre mais tout ce passe super bien jusqu'à la dernière commande ./mjpg_streamer -i "input_uvc.so" -o "output_http.so -w ./www -p 8099 -c utilisateur:motdepasse" MJPG Streamer Version.: 2.0 ERROR: could not find input plugin Perhaps you want to adjust the search path with: # export LD_LIBRARY_PATH=/path/to/plugin/folder dlopen: input_uvc.so: cannot open shared object file: No such file or directory Celle là j'ai reussi à corriger en relisant le topic cependant j'ai encore une erreur sur la dernière commande : ./mjpg_streamer -i "/volume1/public/USB_Webcam/mjpg-streamer/input_uvc.so" -o "/volume1/public/USB_Webcam/mjpg-streamer/output_http.so -w ./www -p 8099 -c yyy:zzzz" MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 5 i: Format............: MJPEG ERROR opening V4L interface: No such device or address Init v4L2 failed !! exit fatal i: init_VideoIn failed Est ce que vous pouvez m'aider ??