Aller au contenu

Php - R


Messages recommandés

Bonjour à tous,

après plusieurs bidouilles sur les fichiers .conf d'apache, je cherche le moyen de retrouver les fichiers "d'origine".

Le fond du problème vient d'une impossibilité de faire une sauvegarde du NAS (car il vérifie l'intégrité des fichiers de conf auparavant, CF ).

Est-ce qu'il y a une commande apache qui permet de retrouver la "conf d'usine" ? je viens de passer en v4.1, et ça n'a visiblement rien changé :-(

SilverSmarty

Lien vers le commentaire
Partager sur d’autres sites

 cat  /usr/syno/apache/conf/httpd.conf-user

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the

# server as "@@ServerRoot@@/logs/foo.log".


#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to point the LockFile directive

# at a local disk.  If you wish to share the same ServerRoot for multiple

# httpd daemons, you will need to change at least LockFile and PidFile.

#

ServerRoot "/usr/syno/apache"


#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:

Listen 


#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

LoadModule rewrite_module modules/mod_rewrite.so

LoadModule xsendfile_module modules/mod_xsendfile.so


<IfModule !mpm_netware_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User nobody

Group nobody

</IfModule>


# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#


#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

ServerAdmin admin


#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

ServerName *:


#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

#DocumentRoot "/var/services/web"


#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# features.

#

<Directory />

    Options FollowSymLinks

    AllowOverride All

</Directory>


#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#


#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "/var/services/web">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options MultiViews FollowSymLinks ExecCGI


    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride All


    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all


    <IfModule xsendfile_module>

	    XSendFile on

	    XSendFilePath /var/services/web/

	    SetEnv MOD_X_SENDFILE_ENABLED yes

    </IfModule>

</Directory>


<Directory "/usr/syno/synoman/phpsrc/web">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options MultiViews FollowSymLinks ExecCGI


    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride None


    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all


    <IfModule xsendfile_module>

	    XSendFile on

	    XSendFilePath /

	    SetEnv MOD_X_SENDFILE_ENABLED yes

    </IfModule>

</Directory>


<Directory "/usr/syno/synoman/empty/web">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options MultiViews FollowSymLinks ExecCGI


    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride None


    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all


</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.html index.htm index.cgi index.php index.php3

</IfModule>


#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<FilesMatch "^\.ht">

    Order allow,deny

    Deny from all

    Satisfy All

</FilesMatch>


#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

#ErrorLog /var/log/httpd-error-user.log

ErrorLog /dev/null

TraceEnable off


#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

#LogLevel debug

LogLevel warn


<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common


    <IfModule logio_module>

	  # You need to enable mod_logio.c to use %I and %O

	  LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>


    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    #CustomLog /var/log/httpd-access-user.log combined

    CustomLog /dev/null combined


    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    #CustomLog logs/access_log combined

</IfModule>


<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to

    # exist in your server's namespace, but do not anymore. The client

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://www.example.com/bar


    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.


    #

    # ScriptAlias: This controls which directories contain server scripts.

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    #ScriptAlias /cgi-bin/ "/usr/syno/apache/cgi-bin/"


</IfModule>


<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock logs/cgisock

</IfModule>


#

# "/usr/syno/apache/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

#<Directory "/usr/syno/apache/cgi-bin">

#    AllowOverride None

#    Options None

#    Order allow,deny

#    Allow from all

#</Directory>


#

# DefaultType: the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain


<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig /usr/syno/apache/conf/mime.types


    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    AddEncoding x-compress Z

    AddEncoding x-gzip gz tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz


    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    AddHandler cgi-script .cgi


    # For type maps (negotiated resources):

    #AddHandler type-map var


    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    #AddType text/html .shtml

    #AddOutputFilter INCLUDES .shtml

    AddType image/x-icon .ico

</IfModule>


#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

MIMEMagicFile /usr/syno/apache/conf/magic


<IfDefine HAVE_PHP>

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

# Forbidden (eg. list files in a directory)

ErrorDocument 403 /webdefault/sample.php?status=403&from=user

# Page not found in apache

ErrorDocument 404 /webdefault/sample.php?status=404&from=user

# Page not found in thttpd

ErrorDocument 500 /webdefault/sample.php?status=500&from=user

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

</IfDefine>


#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall is used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

#

EnableMMAP off

#EnableSendfile off


# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.


# Server-pool management (MPM specific)

Include conf/extra/httpd-mpm.conf-user


# Multi-language error messages

#Include conf/extra/httpd-multilang-errordoc.conf


# Fancy directory listings

Include conf/extra/httpd-autoindex.conf-user


# Language settings

Include conf/extra/httpd-languages.conf-user


# User home directories

#Include conf/extra/httpd-userdir.conf


# Real-time info on requests and configuration

#Include conf/extra/httpd-info.conf


# Virtual hosts

#Include conf/extra/httpd-vhosts.conf


# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf


# Distributed authoring and versioning (WebDAV)

#Include conf/extra/httpd-dav.conf


# Various default settings

Include conf/extra/httpd-default.conf-user


<IfDefine SSL>

# Secure (SSL/TLS) connections

LoadModule ssl_module modules/mod_ssl.so

Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

#	   starting without SSL on platforms with no /dev/random equivalent

#	   but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>

</IfDefine>


<IfDefine HAVE_PHP>

AddType application/x-httpd-php .php

LoadModule php5_module /lib/libphp5.so

</IfDefine>


LoadModule deflate_module modules/mod_deflate.so


<IfModule mod_deflate.c>

	    DeflateCompressionLevel 2

	    AddOutputFilterByType DEFLATE text/html text/plain text/xml

	    AddOutputFilter DEFLATE js css

	    BrowserMatch ^Mozilla/4 gzip-only-text/html

	    BrowserMatch ^Mozilla/4\.[0678] no-gzip

	    BrowserMatch \bMSIE\s7  !no-gzip !gzip-only-text/html

</IfModule>


LoadModule headers_module modules/mod_headers.so


<Files *.js>

Header unset Etag

</Files>


<Files *.css>

Header unset Etag

</Files>


<VirtualHost *:>

Include /usr/syno/etc/sites-enabled-user/*.conf

</VirtualHost>


Lien vers le commentaire
Partager sur d’autres sites

Merci DjMomo !

La seule ligne qui change sur mon fichier est la première :


cat /usr/syno/apache/conf/httpd.conf-user

Elle n'y est pas sur le mien. Sais-tu ce que fait la commande "cat" ? Est-ce une sorte d'Include ? j'essaye d'en savoir plus dans la doc d'apache, mais je pèche un peu ...

SilverSmarty

Lien vers le commentaire
Partager sur d’autres sites

ah zut ... cela veut dire que mon problème ne vient pas de httpd.conf-user ...

J'imagine que httpd.conf ne sert à rien puisqu'il est écrasé à chaque démarrage ...

Il reste le vhost /usr/syno/etc/httpd-vhost.conf-user pour lequel j'ai ça :


NameVirtualHost *:

<VirtualHost *:>

ServerName *

DocumentRoot /var/services/web

</VirtualHost>

DjMomo, ça colle avec le tien ?

Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

×
×
  • Créer...

Information importante

Nous avons placé des cookies sur votre appareil pour aider à améliorer ce site. Vous pouvez choisir d’ajuster vos paramètres de cookie, sinon nous supposerons que vous êtes d’accord pour continuer.