Mailstation2

michel1 · le 24 novembre 2012

Bonjour,

J'ai un nouveau synology le ds713+ et je ne peux avoir acces à roundcube.

Dès que je mets mon nom d'utilisateur et mot de passe il m'indique échec d'authentification. J'ai installe et désinstallé mailstation, changer aussi de version et fait un reset du mot de passe du synology. J'ai toujours la même chose.

Quelqu'un a t'il une réponse ?

Merci d'avance

pluton212+ · le 25 novembre 2012

bonjour,

as-tu installé le serveur de messagerie également?

michel1 · le 25 novembre 2012

bonjour,

Merci pour ta réponse

OUI j'ai installé le serveur de messagerie. Je l'ai même désinstalle croyant que cela pouvais etre lui car dans le ds207 il n'y en avait pas et mail station fonctionnait bien. Mais cela n'a rien changé. Je ne sais vraiment pas ou chercher

michel1 · le 25 novembre 2012

dois je tout reinstaller pour que cela fonctionne?

IL N Y A VRAIMENT PERSONNE POUR M AIDER.

LE SERVEUR DE MESSAGERIE EST INSTALLE? SMTP ACTIVE MAIS QUAND JE VEUX ME LOGUER DANS ROUNCUBE ERREUR D AUTHENFICATION AUSSI BIEN EN ADMIN QUE UTILISATEUR

catimimi · le 25 novembre 2012

Bonjour,

On ne s'énerve pas !! Ecrire en majuscules, c'est crier !!

Ici c'est un forum d'entraide tenu par des bénévoles.

As tu activé le service d'accueil utilisateur ?

Cordialement.

Michel.

michel1 · le 25 novembre 2012

Bonjour,

Je ne m'énerve pas. Mon clavier m indique pas quand je suis en majuscule et dès fois il est trop tard quand je m'en aperçois.

oui j'ai activé le service d'accueil utilisateur. Je suis sur dsm4.1. Avant sur mon ancien syno j'avais dsm3.1 et je n'ai pas eu de souci avec roundcube. Sur celui-là je ne comprend pas seul roundcube n'accepte pas mon mot de passe. Sur photostation pas de soucis. Peut etre cela vient du serveur de messagerie que j'aurais mal parametre. Tout en sachant que je suis sur free et que j'utilise le reverse dnd de free.

Merci si quelqu'un peut m'aider

pluton212+ · le 26 novembre 2012

Je ne m'énerve pas. Mon clavier m indique pas quand je suis en majuscule

attention aux erreurs de frappe alors...

michel1 · le 27 novembre 2012

bonjour,

a ma part donner des leçons de morale il y a t'il quelqu'un pour m'aiguiller.

merci

Petit-genie · le 27 novembre 2012

As-tu respecté les majuscules/minuscules sur le login?J'avais eu ce type de problème.

michel1 · le 27 novembre 2012

bonjour,

oui j'ai fait attention j'ai meme fait un reset du syno pour annuler les mots de passe et toujours impossible de se connecter sur roundcube. Je pense que j'ai fait un mauvais reglage dans le syno, certainnement dans le serveur messagerie. Si quelqu'un avait un tuto ce serait bien.

Merci pour ta réponse

pluton212+ · le 27 novembre 2012

salut,

tu peux poster le retour de vi /var/log/messages?

merci.

catimimi · le 27 novembre 2012

salut,

tu peux poster le retour de vi /var/log/messages?

merci.

Bonjour,

L'utilisation de vi est dangereuse pour ujn novice en Linux. Il vaut mieux utiliser :

cat /var/log/messages

Cordialement.

Michel.

pluton212+ · le 27 novembre 2012

merci

dorénavant je ferai comme çà.

michel1 · le 27 novembre 2012

bonjour,

Je veux bien faire ce que vous me demander mais comme dit catimini je suis novice et je ne sais pas le faire.

Alors où dois je taper cette commande.

Merci

pluton212+ · le 28 novembre 2012

Alors où dois je taper cette commande.

Dans une

michel1 · le 4 décembre 2012

Dec 4 07:01:46 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW

Dec 4 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2

Dec 4 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2

Dec 4 07:01:48 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20

Dec 4 07:01:48 scemd: modules/disk_hibernation.c:1817 SATA Deep sleep timer 1

Dec 4 07:01:48 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0

Dec 4 07:01:48 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.

Dec 4 07:01:48 scemd: modules/scemd_connector.c:103 scemd connector thread start.

Dec 4 07:01:48 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0

Dec 4 07:01:48 scemd: scemd.c:353 WIFI/WPS button is not support on this model.

Dec 4 07:01:48 kernel: [ 63.625379] xhci_hcd 0000:04:00.0: Etron chip found.

Dec 4 07:01:48 kernel: [ 63.636411] xhci_hcd 0000:04:00.0: Failed to enable MSI-X

Dec 4 07:01:48 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id

Dec 4 07:01:48 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310048] in [/dev/sdb] is not ssd

Dec 4 07:01:49 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310411] in [/dev/sda] is not ssd

Dec 4 07:01:49 kernel: [ 65.059813] sd 7:0:0:0: [synoboot] Asking for cache data failed

Dec 4 07:01:49 kernel: [ 65.059821] sd 7:0:0:0: [synoboot] Assuming drive cache: write through

Dec 4 07:01:49 kernel: [ 65.063558] sd 7:0:0:0: [synoboot] Asking for cache data failed

Dec 4 07:01:49 kernel: [ 65.063564] sd 7:0:0:0: [synoboot] Assuming drive cache: write through

Dec 4 07:01:49 kernel: [ 65.194874] GPT:Primary header thinks Alt. header is not at the end of the disk.

Dec 4 07:01:49 kernel: [ 65.202287] GPT:225279 != 250879

Dec 4 07:01:49 kernel: [ 65.205526] GPT:Alternate GPT header not at the end of the disk.

Dec 4 07:01:49 kernel: [ 65.211556] GPT:225279 != 250879

Dec 4 07:01:49 kernel: [ 65.214809] GPT: Use GNU Parted to correct GPT errors.

Dec 4 07:01:49 kernel: [ 65.227470] sd 7:0:0:0: [synoboot] Asking for cache data failed

Dec 4 07:01:49 kernel: [ 65.233452] sd 7:0:0:0: [synoboot] Assuming drive cache: write through

Dec 4 07:01:50 synocheckshare: Fix shares in smb.conf.

Dec 4 07:01:54 synousbdisk: RCClean succeeded

Dec 4 07:01:54 synosata: synosata.c:152 no external sata devices granted

Dec 4 07:01:56 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon

Dec 4 07:01:56 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001

Dec 4 07:01:56 hotplugd: DEVPATH:usb1

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1

Dec 4 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001

Dec 4 07:01:56 hotplugd: DEVPATH:1-0:1.0

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001

Dec 4 07:01:56 hotplugd: DEVPATH:usb2

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2

Dec 4 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001

Dec 4 07:01:56 hotplugd: DEVPATH:2-0:1.0

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001

Dec 4 07:01:56 hotplugd: DEVPATH:usb3

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3

Dec 4 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )

Dec 4 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0

Dec 4 07:01:56 hotplugd: ##### ACTION:add

Dec 4 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001

Dec 4 07:01:56 hotplugd: DEVPATH:3-0:1.0

Dec 4 07:01:56 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:56 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/004/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb4

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/004/001

Dec 4 07:01:57 hotplugd: DEVPATH:4-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/005/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb5

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/005/001

Dec 4 07:01:57 hotplugd: DEVPATH:5-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/006/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb6

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/006/001

Dec 4 07:01:57 hotplugd: DEVPATH:6-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/007/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb7

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/007/001

Dec 4 07:01:57 hotplugd: DEVPATH:7-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/008/001

Dec 4 07:01:57 hotplugd: DEVPATH:usb8

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb8

Dec 4 07:01:57 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb8, /proc/bus/usb/008/001, add, , )

Dec 4 07:01:57 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/008/001

Dec 4 07:01:57 hotplugd: DEVPATH:8-0:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:9/0/0

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/002/002

Dec 4 07:01:57 hotplugd: DEVPATH:2-1

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: external_disk_port_check.c:280 device path should not be NULL

Dec 4 07:01:57 hotplugd: ##### ACTION:add

Dec 4 07:01:57 hotplugd: DEVICE:/proc/bus/usb/002/002

Dec 4 07:01:57 hotplugd: DEVPATH:2-1:1.0

Dec 4 07:01:57 hotplugd: SUBSYSTEM:usb

Dec 4 07:01:57 hotplugd: INTERFACE:8/6/80

Dec 4 07:01:57 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty

Dec 4 07:01:57 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive

Dec 4 07:02:09 root: Syslog Server updater start

Dec 4 07:02:53 root: Cloud Station updater: Upgrade database

Dec 4 07:02:53 root: Cloud Station updater: Upgrading user database

Dec 4 07:02:53 root: Cloud Station updater: Upgrading user database: successful

Dec 4 07:02:53 root: Cloud Station updater: start upgrade data db

Dec 4 07:02:53 root: Cloud Station updater: start upgrade server db

Dec 4 07:02:53 root: Cloud Station updater: start move db

Dec 4 07:02:53 root: moving old client DB for

Dec 4 07:02:53 root: all volume: /volume1

Dec 4 07:02:53 root: create /volume1/@tmp/@cstn-share.10814

Dec 4 07:02:53 root: moving old client OK

Dec 4 07:02:54 root: CS: [start.sh]: Cloud station start...

Dec 4 07:03:36 scheduler: scheduler.c:315 Failed to get value of download_schedule

Dec 4 07:03:36 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule

Dec 4 07:03:48 scemd: scemd.c:413 stop manutild.

Dec 4 09:10:30 scemd: scemd.c:225 stop manutild.

Bonjour

Voici la réponse de la commande. J'espere avoir réussit à tout copier.

Merci

catimimi · le 4 décembre 2012

Bonjour,

Tu ne nous as pas compris, ce que nous souhaitons est le résultat de la commande aussitôt après une tentative infructueuse de connexion à roundcube.

Cordialement.

Michel.

michel1 · le 7 décembre 2012

bonjour,

Désolé mais je ne sais pas comment faire. J'ai essaye de me connecter sur roundcube, puis j'ai ouvert à nouveau une console avec putty et j'ai la même réponse de la derniere fois.

Je ne suis pas connaisseur avec les consoles, alors soit vous abandonnez ou vous m'expliquez

Merci

catimimi · le 7 décembre 2012

Bonjour,

Cela veut dire que l'on ne trouvera pas la solution comme cela.

Je n'abandonne pas, mais il faut apprendre les consoles par toi même ou me donner la main sur ton syno.

Je suis en déplacement donc dans ce cas, cela ne pourra pas être avant mardi.

Cordialement.

Michel.

pluton212+ · le 7 décembre 2012

@michel1,

tu ouvres ta console nouvellement installée,

tu tapes la commande suivante:



> var/log/messages

le ">" est important

cela va avoir pour effet de vider le /var/log/messages,

ensuite tu essayes de te connecter à roundcube,

et enfin tu refais un:



cat /var/log/messages

et tu postes le résultat.

Si la raison du blocage est inscrite ds les messages on le verra plus facilement.

michel1 · le 7 décembre 2012

Bonsoir Pluton

voici ce que cela donne

...tore/webconsole/app/wc_work> > var/log/messages
...tore/webconsole/app/wc_work> cat /var/log/messages
Dec 6 07:01:57 hotplugd: DEVPATH:2-1
Dec 6 07:01:57 hotplugd: SUBSYSTEM:usb
Dec 6 07:01:57 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Dec 6 07:01:57 hotplugd: ##### ACTION:add
Dec 6 07:01:57 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 6 07:01:57 hotplugd: DEVPATH:2-1:1.0
Dec 6 07:01:57 hotplugd: SUBSYSTEM:usb
Dec 6 07:01:57 hotplugd: INTERFACE:8/6/80
Dec 6 07:01:57 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 6 07:01:57 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 6 07:02:10 root: Syslog Server updater start
Dec 6 07:02:55 root: Cloud Station updater: Upgrade database
Dec 6 07:02:55 root: Cloud Station updater: Upgrading user database
Dec 6 07:02:55 root: Cloud Station updater: Upgrading user database: successful
Dec 6 07:02:55 root: Cloud Station updater: start upgrade data db
Dec 6 07:02:55 root: Cloud Station updater: start upgrade server db
Dec 6 07:02:55 root: Cloud Station updater: start move db
Dec 6 07:02:55 root: moving old client DB for
Dec 6 07:02:55 root: all volume: /volume1
Dec 6 07:02:55 root: create /volume1/@tmp/@cstn-share.10797
Dec 6 07:02:55 root: moving old client OK
Dec 6 07:02:55 root: CS: [start.sh]: Cloud station start...
Dec 6 07:03:36 scheduler: scheduler.c:315 Failed to get value of download_schedule
Dec 6 07:03:36 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule
Dec 6 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 6 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 6 23:00:01 scemd: scemd.c:287 receive SIGTERM
Dec 6 23:00:02 supervise/syslog-ng[8471]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 6 23:00:32 root: CS: [start.sh]: Cloud station stop...
Dec 6 23:00:32 synoaudiod: synoaudiod.cpp:1078 synoaudiod exit
Dec 6 23:00:45 scheduler: scheduler.c (1744) Got signal. Die gracefully.
Dec 6 23:00:48 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Dec 6 23:00:49 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 6 23:00:49 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 6 23:00:49 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 6 23:00:51 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 6 23:00:51 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 6 23:00:51 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
killall: synolunbkp: no process killed
Dec 6 23:01:01 supervise/syslog-ng[7037]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 6 23:01:06 synorelayd[6862]: synorelayd.cpp:909 get signal, logout
Dec 6 23:01:06 synorelayd[6862]: synorelayd.cpp:1148 stoped
Dec 6 23:01:09 dhcpcd[3086]: terminating on signal 15
Dec 6 23:01:09 syslogd exiting
Dec 7 07:01:37 syslogd started: BusyBox v1.16.1
Dec 7 07:01:38 spacetool: spacetool.c:2463 [info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [1SgDjF-kFWN-SKcF-eU3q-15Cu-jKPm-ezKTOc]
Dec 7 07:01:38 spacetool: spacetool.c:2470 [info] Activate all VG
Dec 7 07:01:38 dhcpcd[3086]: dhcpReboot: do not want cache
Dec 7 07:01:38 spacetool: spacetool.c:2481 Activate LVM [/dev/vg1000]
Dec 7 07:01:39 synovspace: vspace_wrapper_load_all.c:75 [iNFO] The mount device path of space [/volume1] is [/dev/vg1000/lv]
Dec 7 07:01:41 synologset1: log_syslog_send.c:134 Error connecting to target server: Connection refused
Dec 7 07:01:41 synologset1: log_set1.c:332 Fail to send syslog to remote server.
Dec 7 07:01:46 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 07:01:47 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW
Dec 7 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
Dec 7 07:01:48 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
Dec 7 07:01:48 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Dec 7 07:01:48 scemd: modules/disk_hibernation.c:1817 SATA Deep sleep timer 1
Dec 7 07:01:48 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Dec 7 07:01:48 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Dec 7 07:01:48 scemd: modules/scemd_connector.c:103 scemd connector thread start.
Dec 7 07:01:48 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 07:01:48 scemd: scemd.c:353 WIFI/WPS button is not support on this model.
Dec 7 07:01:48 kernel: [ 63.356363] xhci_hcd 0000:04:00.0: Etron chip found.
Dec 7 07:01:48 kernel: [ 63.367251] xhci_hcd 0000:04:00.0: Failed to enable MSI-X
Dec 7 07:01:48 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Dec 7 07:01:49 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310048] in [/dev/sdb] is not ssd
Dec 7 07:01:49 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310411] in [/dev/sda] is not ssd
Dec 7 07:01:50 kernel: [ 64.826474] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 07:01:50 kernel: [ 64.832579] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 07:01:50 kernel: [ 64.841091] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 07:01:50 kernel: [ 64.847081] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 07:01:50 kernel: [ 64.984930] GPT:Primary header thinks Alt. header is not at the end of the disk.
Dec 7 07:01:50 kernel: [ 64.992342] GPT:225279 != 250879
Dec 7 07:01:50 kernel: [ 64.995577] GPT:Alternate GPT header not at the end of the disk.
Dec 7 07:01:50 kernel: [ 65.001623] GPT:225279 != 250879
Dec 7 07:01:50 kernel: [ 65.004855] GPT: Use GNU Parted to correct GPT errors.
Dec 7 07:01:50 kernel: [ 65.017383] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 07:01:50 kernel: [ 65.023367] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 07:01:50 synocheckshare: Fix shares in smb.conf.
Dec 7 07:01:54 synousbdisk: RCClean succeeded
Dec 7 07:01:54 synosata: synosata.c:152 no external sata devices granted
Dec 7 07:01:56 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon
Dec 7 07:01:56 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb1
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 07:01:56 hotplugd: DEVPATH:1-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb2
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 07:01:56 hotplugd: DEVPATH:2-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb3
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 07:01:56 hotplugd: DEVPATH:3-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb4
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 07:01:56 hotplugd: DEVPATH:4-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb5
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 07:01:56 hotplugd: DEVPATH:5-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb6
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 07:01:56 hotplugd: DEVPATH:6-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb7
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 07:01:56 hotplugd: DEVPATH:7-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 07:01:56 hotplugd: DEVPATH:usb8
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb8
Dec 7 07:01:56 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb8, /proc/bus/usb/008/001, add, , )
Dec 7 07:01:56 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 07:01:56 hotplugd: DEVPATH:8-0:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:9/0/0
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 07:01:56 hotplugd: DEVPATH:2-1
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Dec 7 07:01:56 hotplugd: ##### ACTION:add
Dec 7 07:01:56 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 07:01:56 hotplugd: DEVPATH:2-1:1.0
Dec 7 07:01:56 hotplugd: SUBSYSTEM:usb
Dec 7 07:01:56 hotplugd: INTERFACE:8/6/80
Dec 7 07:01:56 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 07:01:56 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 07:02:10 root: Syslog Server updater start
Dec 7 07:02:54 root: Cloud Station updater: Upgrade database
Dec 7 07:02:54 root: Cloud Station updater: Upgrading user database
Dec 7 07:02:54 root: Cloud Station updater: Upgrading user database: successful
Dec 7 07:02:54 root: Cloud Station updater: start upgrade data db
Dec 7 07:02:54 root: Cloud Station updater: start upgrade server db
Dec 7 07:02:54 root: Cloud Station updater: start move db
Dec 7 07:02:55 root: moving old client DB for
Dec 7 07:02:55 root: all volume: /volume1
Dec 7 07:02:55 root: create /volume1/@tmp/@cstn-share.10814
Dec 7 07:02:55 root: moving old client OK
Dec 7 07:02:55 root: CS: [start.sh]: Cloud station start...
Dec 7 07:03:37 scheduler: scheduler.c:315 Failed to get value of download_schedule
Dec 7 07:03:37 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule
Dec 7 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 7 07:03:48 scemd: scemd.c:413 stop manutild.
Dec 7 08:38:40 scemd: scemd.c:225 stop manutild.
Dec 7 09:02:48 synorelayd[6862]: synorelayd.cpp:942 get sigpipe
Dec 7 09:02:57 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 09:02:57 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 23:00:02 scemd: scemd.c:287 receive SIGTERM
Dec 7 23:00:02 supervise/syslog-ng[8781]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 7 23:00:26 root: CS: [start.sh]: Cloud station stop...
Dec 7 23:00:26 synoaudiod: synoaudiod.cpp:1078 synoaudiod exit
Dec 7 23:00:38 scheduler: scheduler.c (1744) Got signal. Die gracefully.
Dec 7 23:00:40 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd
Dec 7 23:00:41 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 7 23:00:41 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 23:00:41 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 23:00:43 synorelayd[6862]: request.cpp:79 curl_share_cleanup failed
Dec 7 23:00:43 synorelayd[6862]: request_alias.cpp:119 alias name is not string or empty
Dec 7 23:00:43 synorelayd[6862]: synorelayd.cpp:684 failed to get request for keep alive
killall: synolunbkp: no process killed
Dec 7 23:00:53 supervise/syslog-ng[7034]: Daemon exited gracefully, not restarting; exitcode='0'
Dec 7 23:00:58 synorelayd[6862]: synorelayd.cpp:909 get signal, logout
Dec 7 23:00:58 synorelayd[6862]: synorelayd.cpp:1148 stoped
Dec 7 23:01:00 syslogd exiting
Dec 7 23:39:41 syslogd started: BusyBox v1.16.1
Dec 7 23:39:42 dhcpcd[3086]: dhcpReboot: do not want cache
Dec 7 23:39:42 spacetool: spacetool.c:2463 [info] Old vg path: [/dev/vg1000], New vg path: [/dev/vg1000], UUID: [1SgDjF-kFWN-SKcF-eU3q-15Cu-jKPm-ezKTOc]
Dec 7 23:39:42 spacetool: spacetool.c:2470 [info] Activate all VG
Dec 7 23:39:42 spacetool: spacetool.c:2481 Activate LVM [/dev/vg1000]
Dec 7 23:39:43 synovspace: vspace_wrapper_load_all.c:75 [iNFO] The mount device path of space [/volume1] is [/dev/vg1000/lv]
Dec 7 23:39:45 synologset1: log_syslog_send.c:134 Error connecting to target server: Connection refused
Dec 7 23:39:45 synologset1: log_set1.c:332 Fail to send syslog to remote server.
Dec 7 23:39:51 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 23:39:51 scemd: modules/fan_speed_adjust_common.c:118 Type: INTERNAL Fan Mode: LOW
Dec 7 23:39:52 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 2, designed disks 2
Dec 7 23:39:52 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 2, designed disks 2
Dec 7 23:39:52 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20
Dec 7 23:39:52 scemd: modules/disk_hibernation.c:1817 SATA Deep sleep timer 1
Dec 7 23:39:52 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0
Dec 7 23:39:52 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled.
Dec 7 23:39:52 scemd: modules/scemd_connector.c:103 scemd connector thread start.
Dec 7 23:39:52 scemd: scemd.c:154 fan_type=6, raid_type=1, led_type=1, thermal_type=1, diskled_ctrl_type=1, auto_poweron_type=1, dual_power_type=1, usbcopy_type=1, fan_number=1, eunit_pwron_type=1, pis_type=1, rtc_type=3, lcm_type=2, wifi_wps_type=0
Dec 7 23:39:52 scemd: scemd.c:353 WIFI/WPS button is not support on this model.
Dec 7 23:39:52 kernel: [ 62.911896] xhci_hcd 0000:04:00.0: Etron chip found.
Dec 7 23:39:52 kernel: [ 62.922736] xhci_hcd 0000:04:00.0: Failed to enable MSI-X
Dec 7 23:39:53 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id
Dec 7 23:39:53 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310048] in [/dev/sdb] is not ssd
Dec 7 23:39:53 syno_hdd_util: Model:[WD10EFRX-68JCSN0], Firmware:[01.01A01], S/N:[WD-WMC1U5310411] in [/dev/sda] is not ssd
Dec 7 23:39:54 kernel: [ 64.342379] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 23:39:54 kernel: [ 64.348424] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 23:39:54 kernel: [ 64.357087] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 23:39:54 kernel: [ 64.363051] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 23:39:54 kernel: [ 64.500933] GPT:Primary header thinks Alt. header is not at the end of the disk.
Dec 7 23:39:54 kernel: [ 64.508358] GPT:225279 != 250879
Dec 7 23:39:54 kernel: [ 64.511871] GPT:Alternate GPT header not at the end of the disk.
Dec 7 23:39:54 kernel: [ 64.517893] GPT:225279 != 250879
Dec 7 23:39:54 kernel: [ 64.522519] GPT: Use GNU Parted to correct GPT errors.
Dec 7 23:39:54 kernel: [ 64.535911] sd 7:0:0:0: [synoboot] Asking for cache data failed
Dec 7 23:39:54 kernel: [ 64.541889] sd 7:0:0:0: [synoboot] Assuming drive cache: write through
Dec 7 23:39:55 synocheckshare: Fix shares in smb.conf.
Dec 7 23:39:59 synousbdisk: RCClean succeeded
Dec 7 23:39:59 synosata: synosata.c:152 no external sata devices granted
Dec 7 23:40:01 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon
Dec 7 23:40:01 heartbeatd: heartbeatd.c:164 DDNS does not enable, skip starting
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb1
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1a.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/001/001
Dec 7 23:40:01 hotplugd: DEVPATH:1-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb2
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:1d.7
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/001
Dec 7 23:40:01 hotplugd: DEVPATH:2-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb3
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/003/001
Dec 7 23:40:01 hotplugd: DEVPATH:3-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb4
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0003:0000:04:00.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/004/001
Dec 7 23:40:01 hotplugd: DEVPATH:4-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb5
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:1a.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/005/001
Dec 7 23:40:01 hotplugd: DEVPATH:5-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb6
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:1d.0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/006/001
Dec 7 23:40:01 hotplugd: DEVPATH:6-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb7
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:1d.1
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/007/001
Dec 7 23:40:01 hotplugd: DEVPATH:7-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 23:40:01 hotplugd: DEVPATH:usb8
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb8
Dec 7 23:40:01 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb8, /proc/bus/usb/008/001, add, , )
Dec 7 23:40:01 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/008/001, usbid=1d6b:0001:0000:00:1d.2
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/008/001
Dec 7 23:40:01 hotplugd: DEVPATH:8-0:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:9/0/0
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 23:40:01 hotplugd: DEVPATH:2-1
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: external_disk_port_check.c:280 device path should not be NULL
Dec 7 23:40:01 hotplugd: ##### ACTION:add
Dec 7 23:40:01 hotplugd: DEVICE:/proc/bus/usb/002/002
Dec 7 23:40:01 hotplugd: DEVPATH:2-1:1.0
Dec 7 23:40:01 hotplugd: SUBSYSTEM:usb
Dec 7 23:40:01 hotplugd: INTERFACE:8/6/80
Dec 7 23:40:02 synorelayd[6861]: request_alias.cpp:119 alias name is not string or empty
Dec 7 23:40:02 synorelayd[6861]: synorelayd.cpp:684 failed to get request for keep alive
Dec 7 23:40:14 root: Syslog Server updater start
Dec 7 23:40:58 root: Cloud Station updater: Upgrade database
Dec 7 23:40:58 root: Cloud Station updater: Upgrading user database
Dec 7 23:40:58 root: Cloud Station updater: Upgrading user database: successful
Dec 7 23:40:59 root: Cloud Station updater: start upgrade data db
Dec 7 23:40:59 root: Cloud Station updater: start upgrade server db
Dec 7 23:40:59 root: Cloud Station updater: start move db
Dec 7 23:40:59 root: moving old client DB for
Dec 7 23:40:59 root: all volume: /volume1
Dec 7 23:40:59 root: create /volume1/@tmp/@cstn-share.10805
Dec 7 23:40:59 root: moving old client OK
Dec 7 23:40:59 root: CS: [start.sh]: Cloud station start...
Dec 7 23:41:41 scheduler: scheduler.c:315 Failed to get value of download_schedule
Dec 7 23:41:41 scheduler: scheduler.c:322 Failed to get value of download_amule_schedule
Dec 7 23:41:52 scemd: scemd.c:413 stop manutild.
Dec 7 23:41:52 scemd: scemd.c:413 stop manutild.
Dec 7 23:54:02 PkgSynoMan.cgi: PkgSynoMan.cpp:893 Failed to mkdir pkglist.tmp, File exists
Dec 8 00:03:58 PkgSynoMan.cgi: PkgSynoMan.cpp:345 Failed to curl perform, code=18, err=Transferred a partial file
...tore/webconsole/app/wc_work>

pluton212+ · le 8 décembre 2012

Michel,

Çà n'a pas vidé le log visiblement (>)

vu que la raison pour laquelle tu ne connectes pas roundcube n'apparait pas à priori dans le journal je ne vois pas quoi faire pour te démêler.

Attendons d'autres avis.

Désolé.

cricx · le 8 décembre 2012

ça ne peut pas vider le log avec une sintaxe erronée...

il manque le slash de début :

>/var/log/messages

devrait mieux fonctionner !

et mieux :

echo $(date)>/var/log/messages

comme ça on a en première ligne la date d'initialisation du fichier de log

donne le résultat de

netstat -tan

ou

netstat -tan |grep LISTEN

et

ps |grep dovecot

(pour voir si dovecot tourne)

pluton212+ · le 9 décembre 2012

en effet...

michel1 · le 20 décembre 2012

Bonjour,

Désolé de mon retard de réponse mais beaucoup d'occupation.

Voici la réponse de la premier commande:

tcp 0 0 0.0.0.0:49152 tcp 0 0 0.0.0.0:161 tcp 0 0 127.0.0.1:7330 tcp 0 0 0.0.0.0:3306 tcp 0 0 0.0.0.0:139 tcp 0 0 0.0.0.0:34668 tcp 0 0 0.0.0.0:236 tcp 0 0 0.0.0.0:9005 tcp 0 0 0.0.0.0:110 tcp 0 0 127.0.0.1:783 tcp 0 0 0.0.0.0:143 tcp 0 0 0.0.0.0:32400 tcp 0 0 0.0.0.0:8080 tcp 0 0 0.0.0.0:465 tcp 0 0 0.0.0.0:50001 tcp 0 0 0.0.0.0:50002 tcp 0 0 0.0.0.0:64179 tcp 0 0 0.0.0.0:32469 tcp 0 0 0.0.0.0:21 tcp 0 0 0.0.0.0:22 tcp 0 0 0.0.0.0:631 tcp 0 0 0.0.0.0:5432 tcp 0 0 0.0.0.0:25 tcp 0 0 127.0.0.1:4700 tcp 0 0 0.0.0.0:445 tcp 0 0 ::%135354538:161 tcp 0 0 ::%135354538:515 tcp 0 0 ::%135354538:548 tcp 0 0 ::%135354538:5000 tcp 0 0 ::%135354538:5001 tcp 0 0 ::%135354538:139 tcp 0 0 ::%135354538:5005 tcp 0 0 ::%135354538:5006 tcp 0 0 ::%135354538: 0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
0.0.0.0:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
src="emoticons/aqua_mega_shok.gif" alt="80"> ::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN
::%135518642:* LISTEN

La deuxieme commande:

...tore/webconsole/app/wc_work> ps |grep dovecot

16497 root 2536 S sh -c ps |grep dovecot 2>&1
16499 root 2540 R grep dovecot

Petite question pour moi c'est quoi dovecot?

J'espere que cela va vous aider pour me donner une réponse a mon problème.

Merci

Connexion

Mailstation2

Messages recommandés

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Rejoindre la conversation

Qui est en ligne 2 membres, 0 anonyme, 278 invités (Afficher la liste complète)

Contributeurs populaires

Information importante