Aller au contenu

Migration Raid1 Vers Raid5: Plus D'acc

mightor
 Partager

Messages recommandés

mightor Newbie

mightor

Posté(e)
Posté(e)

Bonjour,

J'ai ajouté un 3e disque dans mon DS412+ et j'ai lancé la migration de mon volume1, de RAID1 (disques 1+2) vers RAID5 (disques 1+2+3).

J'ai suivi cette procédure: http://forum.synology.com/wiki/index.php/How_to_expand_the_RAID_Volume_with_additional_disks

Au début tout semblait bien se passer et puis au bout d'un moment, je n'ai plus réussi à accéder au gestionnaire de stockage. Depuis, je n'arrive plus à accéder à l'interface Web du NAS. Et mes ordinateurs n'accèdent plus aux dossiers partagés par le NAS.

La seule chose que j'arrive encore à faire, c'est me connecter en SSH. Et lorsque j'essaye de lister le contenu du dossier /volume1, la commande "ls" ne répond pas. Je peux en revanche lister le contenu du volume2 (disque 4, BASIC) avec la commande ls sans problème.

Le NAS est sur onduleur, il n'y a pas eu de coupure. Et pour le moment, je ne l'ai pas forcé à rebooter.

Je sais que ce genre d'opération peut durer longtemps (plusieurs jours), mais tout les témoignages indiquent que pendant ce temps, le NAS reste accessible, ce qui n'est pas mon cas.

Qui peut m'aider ?

Merci d'avoir lu jusqu'au bout !

0
Lien vers le commentaire
Partager sur d’autres sites
gaetan.cambier Newbie

gaetan.cambier

Posté(e)
Posté(e)

v te donner le mien, tu va comprendre :

DiskStation> uptime
 14:23:35 up 11 days,  5:05, load average: 3.62, 3.56, 3.49

bon, serieusement, il y a quoi qui prend autant de ressource sur ce nas ?

la commande "top" permettrait de le savoir, si elle veux bien fonctionner vu que le nas est completement surchargé

0
Lien vers le commentaire
Partager sur d’autres sites
mightor Newbie

mightor

Posté(e)
  • Auteur
Posté(e)
Voilà
Mem: 868872K used, 144484K free, 0K shrd, 55576K buff, 509320K cached
CPU: 0.1% usr 0.0% sys 0.0% nic 99.7% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 408.57 406.09 399.58 2/737 18868
PID PPID USER STAT VSZ %MEM %CPU COMMAND
13676 1 root S 60904 5.9 0.0 /usr/syno/sbin/synorelayd
27235 1 root S 488m 49.2 0.0 /var/packages/CloudStation/target/sbin/syncd -c /v
18392 6243 root S 54832 5.4 0.0 sshd: root@pts/4
27407 1 root S 87380 8.6 0.0 /var/packages/CloudStation/target/sbin/syno-cloud-
26511 1 root S < 77916 7.6 0.0 /var/packages/AudioStation/target/sbin/synoaudiod
10287 1 root S 30044 2.9 0.0 /usr/bin/nmbd -D
10338 1 root S 24412 2.4 0.0 /usr/syno/sbin/snmpd -Ln -c /usr/syno/etc/snmpd.co
18851 18405 root R 3828 0.3 0.0 top
28599 28471 http S 302m 30.5 0.0 /usr/bin/httpd -DSSL -DSPDY -DHAVE_PHP
28294 1 root S 186m 18.7 0.0 php-fpm: master process (/etc/php/php-fpm.conf)
28316 28294 http S 186m 18.7 0.0 php-fpm: pool www
28317 28294 http S 186m 18.7 0.0 php-fpm: pool www
26181 1 root S 88888 8.7 0.0 /var/packages/VideoStation/target/sbin/synovpcd
8581 1 root S 88228 8.6 0.0 scemd
26531 1 root S < 79640 7.8 0.0 /var/packages/AudioStation/target/bin/pulseaudio -
27494 1 root S 79320 7.8 0.0 nzbget -b -c /volume1/@download/2903/_nzb.conf /vo
26851 1 root S 75360 7.4 0.0 /var/packages/DownloadStation/target/sbin/transmis
28559 1 root S 62924 6.1 0.0 nzbget -b -c /volume1/@download/2904/_nzb.conf /vo
29106 8539 root S < 47604 4.6 0.0 /usr/bin/httpd -DAPPARMOR -f /etc/httpd/conf/httpd
6173 1 root S 46656 4.5 0.0 /usr/sbin/ntpd -p /var/run/ntpd.pid -g
24847 24843 root S 40812 4.0 0.0 /usr/bin/httpd -f /etc/httpd/conf/httpd.conf-webda
24848 24843 root S 40812 4.0 0.0 /usr/bin/httpd -f /etc/httpd/conf/httpd.conf-webda
25686 1 root S 40468 3.9 0.0 /var/packages/iTunesServer/target/sbin/mt-daapd
12200 25613 regis D 38480 3.7 0.0 /usr/bin/smbd -F
12143 25613 regis D 38476 3.7 0.0 /usr/bin/smbd -F
12285 25613 regis D 38440 3.7 0.0 /usr/bin/smbd -F
8343 25613 regis D 38436 3.7 0.0 /usr/bin/smbd -F
12224 25613 regis D 38432 3.7 0.0 /usr/bin/smbd -F
12304 25613 regis D 38424 3.7 0.0 /usr/bin/smbd -F
12334 25613 regis D 38424 3.7 0.0 /usr/bin/smbd -F
12165 25613 regis D 38420 3.7 0.0 /usr/bin/smbd -F
12191 25613 regis D 38420 3.7 0.0 /usr/bin/smbd -F
12149 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12151 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12155 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12157 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12163 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12175 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12185 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12189 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12193 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12195 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12198 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12153 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12159 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12161 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12167 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12169 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12171 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12173 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12177 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12179 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12183 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12187 25613 regis D 38408 3.7 0.0 /usr/bin/smbd -F
12135 25613 regis D 38400 3.7 0.0 /usr/bin/smbd -F
12181 25613 regis D 38340 3.7 0.0 /usr/bin/smbd -F
12140 25613 regis D 38340 3.7 0.0 /usr/bin/smbd -F
0
Lien vers le commentaire
Partager sur d’autres sites
gaetan.cambier Newbie

gaetan.cambier

Posté(e)
Posté(e)

alors ement je comprend pas :

le cpu n'est pas surchargé (99% idle)

il y a de la ram libre --> pas de risque de swap

reste plus que un disque deconne a fond et fasse tout ralentir pour avoir un load average si haut (et après les 2 commande, il a augmenté)


on va essayé de verifier les disque en ligne de commande :

smartctl -a -d sat -T permissive /dev/sda

idem pour sdb ...

0
Lien vers le commentaire
Partager sur d’autres sites
mightor Newbie

mightor

Posté(e)
  • Auteur
Posté(e) (modifié)

/dev/sda:

DiskStation> smartctl -a -d sat -T permissive /dev/sda
smartctl 6.2 (build date Jan 7 2015) [x86_64-linux-3.2.40] (local build)
Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD30EFRX-68AX9N0
Serial Number: WD-WMC1T2348138
LU WWN Device Id: 5 0014ee 6adc95f95
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Feb 2 15:07:04 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (39600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 398) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 177 176 021 Pre-fail Always - 6108
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 437
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 16891
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 382
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 42
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 394
194 Temperature_Celsius 0x0022 125 114 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16832 -
# 2 Short offline Completed without error 00% 16664 -
# 3 Short offline Completed without error 00% 16496 -
# 4 Extended offline Completed without error 00% 16476 -
# 5 Short offline Completed without error 00% 16328 -
# 6 Short offline Completed without error 00% 16160 -
# 7 Short offline Completed without error 00% 15992 -
# 8 Short offline Completed without error 00% 15825 -
# 9 Extended offline Completed without error 00% 15733 -
#10 Short offline Completed without error 00% 15657 -
#11 Short offline Completed without error 00% 15489 -
#12 Short offline Completed without error 00% 15321 -
#13 Short offline Completed without error 00% 15153 -
#14 Extended offline Completed without error 00% 15052 -
#15 Extended offline Completed without error 00% 15014 -
#16 Short offline Completed without error 00% 14985 -
#17 Short offline Completed without error 00% 14818 -
#18 Short offline Completed without error 00% 14650 -
#19 Short offline Completed without error 00% 14481 -
#20 Short offline Completed without error 00% 14313 -
#21 Extended offline Completed without error 00% 14270 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/sdb:

DiskStation> smartctl -a -d sat -T permissive /dev/sdb
smartctl 6.2 (build date Jan 7 2015) [x86_64-linux-3.2.40] (local build)
Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD30EFRX-68AX9N0
Serial Number: WD-WMC1T2283710
LU WWN Device Id: 5 0014ee 6031f9bde
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Feb 2 15:09:41 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 408) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 176 174 021 Pre-fail Always - 6183
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 437
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 16890
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 383
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 42
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 394
194 Temperature_Celsius 0x0022 122 112 000 Old_age Always - 28
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16831 -
# 2 Short offline Completed without error 00% 16663 -
# 3 Short offline Completed without error 00% 16495 -
# 4 Extended offline Completed without error 00% 16475 -
# 5 Short offline Completed without error 00% 16327 -
# 6 Short offline Completed without error 00% 16159 -
# 7 Short offline Completed without error 00% 15991 -
# 8 Short offline Completed without error 00% 15824 -
# 9 Extended offline Completed without error 00% 15732 -
#10 Short offline Completed without error 00% 15656 -
#11 Short offline Completed without error 00% 15488 -
#12 Short offline Completed without error 00% 15320 -
#13 Short offline Completed without error 00% 15152 -
#14 Extended offline Completed without error 00% 15013 -
#15 Short offline Completed without error 00% 14985 -
#16 Short offline Completed without error 00% 14817 -
#17 Short offline Completed without error 00% 14649 -
#18 Short offline Completed without error 00% 14480 -
#19 Short offline Completed without error 00% 14312 -
#20 Extended offline Completed without error 00% 14269 -
#21 Short offline Completed without error 00% 14144 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

et enfin /dev/sdc:

DiskStation> smartctl -a -d sat -T permissive /dev/sdc
smartctl 6.2 (build date Jan 7 2015) [x86_64-linux-3.2.40] (local build)
Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD30EFRX-68EUZN0
Serial Number: WD-WCC4N6ZY0DNJ
LU WWN Device Id: 5 0014ee 20b1091a4
Firmware Version: 82.00A82
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Feb 2 15:10:33 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (39240) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 394) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 22
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 3
194 Temperature_Celsius 0x0022 122 121 000 Old_age Always - 28
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Et au fait, merci pour le coup de main. J'apprécie

Modifié par mightor
0
Lien vers le commentaire
Partager sur d’autres sites
mightor Newbie

mightor

Posté(e)
  • Auteur
Posté(e) (modifié)

Les disques semblant saints, la question que me taraude maintenant, c'est: que faire ? Attendre ? Est-ce que le NAS est encore en train de faire quelque chose de constructif avec ce volume ? Faut-il le redémarrer ? Va-t-il continuer l'opération de migration du raid dans ce cas ?

Et la plus importante: y a-t-il une chance de récupérer ce volume et son contenu (partages, contenus) ?

Modifié par mightor
0
Lien vers le commentaire
Partager sur d’autres sites
mightor Newbie

mightor

Posté(e)
  • Auteur
Posté(e)

Le NAS semble occupé sur les io ce matin:

Mem: 921088K used, 92268K free, 0K shrd, 73416K buff, 491908K cached
CPU: 0.0% usr 0.1% sys 0.0% nic 74.7% idle 25.1% io 0.0% irq 0.0% sirq
Load average: 599.41 599.48 599.55 2/957 21931
PID PPID USER STAT VSZ %MEM %CPU COMMAND
13676 1 root S 60904 5.9 0.0 /usr/syno/sbin/synorelayd
26511 1 root S < 77916 7.6 0.0 /var/packages/AudioStation/target/sbin/synoaudiod
27235 1 root S 664m 66.9 0.0 /var/packages/CloudStation/target/sbin/syncd -c /v
10338 1 root S 24412 2.4 0.0 /usr/syno/sbin/snmpd -Ln -c /usr/syno/etc/snmpd.co
26551 1 root S < 13944 1.3 0.0 /var/packages/AudioStation/target/sbin/synorcd
21915 18405 root R 3828 0.3 0.0 top
28599 28471 http S 302m 30.5 0.0 /usr/bin/httpd -DSSL -DSPDY -DHAVE_PHP
28294 1 root S 186m 18.7 0.0 php-fpm: master process (/etc/php/php-fpm.conf)
28316 28294 http S 186m 18.7 0.0 php-fpm: pool www
28317 28294 http S 186m 18.7 0.0 php-fpm: pool www
26181 1 root S 89912 8.8 0.0 /var/packages/VideoStation/target/sbin/synovpcd
8581 1 root S 88228 8.6 0.0 scemd
27407 1 root S 87380 8.6 0.0 /var/packages/CloudStation/target/sbin/syno-cloud-
26531 1 root S < 79640 7.8 0.0 /var/packages/AudioStation/target/bin/pulseaudio -
27494 1 root S 79320 7.8 0.0 nzbget -b -c /volume1/@download/2903/_nzb.conf /vo
26851 1 root S 75360 7.4 0.0 /var/packages/DownloadStation/target/sbin/transmis
28559 1 root S 62924 6.1 0.0 nzbget -b -c /volume1/@download/2904/_nzb.conf /vo
18392 6243 root S 54828 5.4 0.0 sshd: root@pts/4
29106 8539 root S < 47604 4.6 0.0 /usr/bin/httpd -DAPPARMOR -f /etc/httpd/conf/httpd
6173 1 root S 46656 4.5 0.0 /usr/sbin/ntpd -p /var/run/ntpd.pid -g
24847 24843 root S 40812 4.0 0.0 /usr/bin/httpd -f /etc/httpd/conf/httpd.conf-webda
24848 24843 root S 40812 4.0 0.0 /usr/bin/httpd -f /etc/httpd/conf/httpd.conf-webda
25686 1 root S 40468 3.9 0.0 /var/packages/iTunesServer/target/sbin/mt-daapd
13145 25613 regis D 38588 3.8 0.0 /usr/bin/smbd -F
12559 25613 regis D 38528 3.7 0.0 /usr/bin/smbd -F
13012 25613 regis D 38528 3.7 0.0 /usr/bin/smbd -F
12525 25613 regis D 38516 3.7 0.0 /usr/bin/smbd -F
12663 25613 regis D 38516 3.7 0.0 /usr/bin/smbd -F
0
Lien vers le commentaire
Partager sur d’autres sites
mightor Newbie

mightor

Posté(e)
  • Auteur
Posté(e)

Le petit uptime du matin:

DiskStation> uptime
07:12:46 up 2 days, 13:25, load average: 636.18, 635.60, 634.09

Et un top (les IO ont doublé depuis hier):

Mem: 912464K used, 100892K free, 0K shrd, 86288K buff, 447184K cached
CPU: 0.0% usr 0.1% sys 0.0% nic 50.1% idle 49.7% io 0.0% irq 0.0% sirq
Load average: 637.23 636.02 634.35 2/1024 18196
PID PPID USER STAT VSZ %MEM %CPU COMMAND
13676 1 root S 60904 5.9 0.0 /usr/syno/sbin/synorelayd
26511 1 root S < 78312 7.7 0.0 /var/packages/AudioStation/target/sbin
18187 18078 root R 3828 0.3 0.0 top
27407 1 root S 87380 8.6 0.0 /var/packages/CloudStation/target/sbin
26551 1 root S < 13944 1.3 0.0 /var/packages/AudioStation/target/sbin
359 2 root SW 0 0.0 0.0 [kworker/2:1]
27235 1 root S 665m 67.0 0.0 /var/packages/CloudStation/target/sbin
28599 28471 http S 303m 30.5 0.0 /usr/bin/httpd -DSSL -DSPDY -DHAVE_PHP
28294 1 root S 186m 18.7 0.0 php-fpm: master process (/etc/php/php-
28316 28294 http S 186m 18.7 0.0 php-fpm: pool www
28317 28294 http S 186m 18.7 0.0 php-fpm: pool www
26181 1 root S 89924 8.8 0.0 /var/packages/VideoStation/target/sbin
8581 1 root S 88228 8.6 0.0 scemd
26531 1 root S < 79640 7.8 0.0 /var/packages/AudioStation/target/bin/
27494 1 root S 79320 7.8 0.0 nzbget -b -c /volume1/@download/2903/_
26851 1 root S 75360 7.4 0.0 /var/packages/DownloadStation/target/s
28559 1 root S 62924 6.1 0.0 nzbget -b -c /volume1/@download/2904/_
18060 6243 root S 54688 5.3 0.0 sshd: root@pts/4
29106 8539 root S < 47604 4.6 0.0 /usr/bin/httpd -DAPPARMOR -f /etc/http
6173 1 root S 46656 4.5 0.0 /usr/sbin/ntpd -p /var/run/ntpd.pid -g

Et toujours pas de réponse à la commande cat /proc/mdstat


Comment savoir si le processus de construction du RAID5 est en cours sans cette commande ? Combien de temps au maximum cette conversion de RAID1 vers RAID5 (3To pleins à 99%) peut-elle prendre ?

0
Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

×
 Partager
Aller sur la liste des sujets
×
×
  • Créer...

Information importante

Nous avons placé des cookies sur votre appareil pour aider à améliorer ce site. Vous pouvez choisir d’ajuster vos paramètres de cookie, sinon nous supposerons que vous êtes d’accord pour continuer.