disque hs ou contrôleur

[lordtaki]

Bonjour,

un disque dur HS que je remplace par la même référence:

# smartctl -d ata -i /dev/sdc
smartctl 6.5 (build date Jul 27 2016) [ppc-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST3000DM001
Serial Number:    Z5038KX8
LU WWN Device Id: 5 000c50 091c6cfa8
Firmware Version: CC26
User Capacity:    137,438,952,960 bytes [137 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s
Local Time is:    Thu Sep  1 18:06:28 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Sauf que je ne peux pas l'initialisé via DSM, je ne le vois pas via fdisk -l et j'ai cela dans /var/log/messages... disque ou contrôleur d'après-vous?

2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.331015] ata3.00: failed command: READ DMA
2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.335442] ata3.00: cmd c8/00:08:80:70:7b/00:00:00:00:00/e0 tag 0 dma 4096 in
2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.335446]          res 51/04:08:80:70:7b/04:00:00:00:00/e0 Emask 0x1 (device error)
2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.350489] ata3.00: status: { DRDY ERR }
2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.354496] ata3.00: error: { ABRT }
2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.866730] Descriptor sense data with sense descriptors (in hex):
2016-09-01T18:03:20+02:00 edgecrusher kernel: [ 1777.894334] end_request: I/O error, dev sdc, sector 8089728
2016-09-01T18:03:21+02:00 edgecrusher synostorage: AtaSmartRawValueGet(67) read value /dev/sdc fail
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: hotplugd.c:1304 ##### ACTION:add
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: DEVNAME:sdc
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: DEVGUID:Z5038KX80
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: DEVPATH:sdc
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: SUBSYSTEM:block
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: PHYSDEVPATH:/devices/pci0001:02/0001:02:00.0/0001:03:00.0/host2/target2:0:0/2:0:0:0
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: hotplugd.c:1392 ==== SATA disk [sdc] hotswap [add] ====
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: disk/smartctl_enable.c:111 AtaSmartEnable failed.
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: hotplugd.c:1421 ==== SATA disk [sdc] Model: [ST3000DM001             ] ====
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: hotplugd.c:1422 ==== SATA disk [sdc] Serial number: [Z5038KX8] ====
2016-09-01T18:03:21+02:00 edgecrusher hotplugd: hotplugd.c:1423 ==== SATA disk [sdc] Firmware version: [CC26] ====
2016-09-01T18:03:22+02:00 edgecrusher synostorage: SmartDataRead(108) read value /dev/sdc fail
2016-09-01T18:03:22+02:00 edgecrusher synostorage: disk/disk_temperature_get.c:75 read value /dev/sdc fail
2016-09-01T18:03:22+02:00 edgecrusher synostorage: disk/disk_current_health_get.c:76 SYNODiskAtaSmartInfoParse failed on /dev/sdc
2016-09-01T18:03:22+02:00 edgecrusher synostorage: synostorage_int_disk.c:145 Failed to get health attribute
2016-09-01T18:03:22+02:00 edgecrusher synostorage: disk/disk_current_health_get.c:76 SYNODiskAtaSmartInfoParse failed on /dev/sdc
2016-09-01T18:03:22+02:00 edgecrusher synostorage: synostorage_int_disk.c:173 Failed to get health attribute
2016-09-01T18:03:23+02:00 edgecrusher sk: AtaSmartRawValueGet(67) read value /dev/sdc fail
2016-09-01T18:03:23+02:00 edgecrusher sk: AtaSmartRawValueGet(67) read value /dev/sdc fail

[Mic13710]

Panne au déballage sans doute.

Faites un test sur un pc avec le logiciel du constructeur. De toute manière, il vous le demandera avant d'accepter le retour.