Problème Synology inaccessible, accès disque permanent

Minada · le 30 avril 2017

Bonjour à tous,

J'espère être dans la bonne section.

Je possède un Synology DS411j actuellement sous DSM 6.1 il me semble (difficile de le vérifier ..).

Il y a une semaine, j'ai effectué la copie d'un grand nombre de photos sur mon Synology et depuis, plus moyen d'y accéder. Les LEDs accès disque dur sont en permanence clignotantes, et l'interface du DSM est généralement inaccessible (quand j'arrive à y accéder par miracle, tout est extrêmement lent et se termine généralement par une durée trop longue d'attente ...).

J'ai tenté plusieurs redémarrages, il met plusieurs dizaines de minutes avant de prendre en compte la commande d'arrêt ...

J'arrive à me connecter en ssh mais partant de là je ne vois pas trop quoi faire. J'ai cherché un peu d'informations sur le net mais aucune des solutions que j'ai pu voir n'ont été effectives.

Auriez-vous une idée ?

Einsteinium · le 30 avril 2017

Ton problème est un peu sans surprise, l'indexation et la génération des miniatures met à genoux ton nas...

Tu as transferts qu'elle quantité pour avoir une idée ?

Minada · le 30 avril 2017

Un peu plus de 1600 photos (dont 1 ou 2 vidéos ...) pour environ 6 Go.

J'ai pensé à ce problème d'indexation et j'ai donc déplacé tous les dossiers incriminés hors du dossier /photo, mais le problème persiste ...

Einsteinium · le 30 avril 2017

En ssh fait un top pour voir ce qui consomme

Minada · le 30 avril 2017

Voilà le résultat d'un top :

Tasks: 211 total,   1 running, 210 sleeping,   0 stopped,   0 zombie
%Cpu(s):  7.2 us, 26.1 sy,  0.0 ni,  0.0 id, 64.4 wa,  1.7 hi,  0.6 si,  0.0 st
GiB Mem :    0.113 total,    0.008 free,    0.059 used,    0.046 buff/cache
GiB Swap:    2.000 total,    1.898 free,    0.102 used.    0.011 avail Mem

  PID USER      PR  NI    VIRT    RES %CPU %MEM     TIME+ S COMMAND
 7876 admin     20   0    5.3m   1.2m  4.6  1.1   0:00.62 R top
 7215 root      20   0   32.4m   1.6m  3.6  1.3   0:02.68 D /var/packages/PHP5.6/target/usr/local/bin/php56-fpm -c /var/packages/PHP5.6/target/usr/local/etc/php56/php.i+
 7024 root      20   0   30.8m   2.1m  3.1  1.8   0:02.74 D /var/packages/HyperBackup/target/bin/dsmbackup --clean-backup-snapshot
 7936 root      20   0    9.7m   2.4m  3.1  2.0   0:00.08 D /usr/syno/sbin/synoservice --is-enable sftp
 6876 root      20   0   39.0m   0.9m  2.6  0.8   0:04.30 D /var/packages/SynoFinder/target/sbin/synoelasticd
 6984 root      20   0   92.4m   1.8m  1.5  1.6   0:02.66 D /usr/syno/bin/scemd
   99 root      20   0    0.0m   0.0m  1.0  0.0   0:05.58 S [kblockd/0]
  129 root      20   0    0.0m   0.0m  1.0  0.0   0:02.31 D [kswapd0]
 4771 root      20   0   13.3m   1.1m  1.0  1.0   0:00.80 S /usr/syno/sbin/synostoraged
 7048 root      20   0   37.2m   1.6m  1.0  1.3   0:02.84 D /var/packages/HyperBackupVault/target/bin/synoimgbkptool -G
 7178 root      20   0   44.8m   1.0m  1.0  0.9   0:01.15 D /var/packages/iTunesServer/target/sbin/mt-daapd
 7702 postgres  20   0   51.1m   2.4m  1.0  2.1   0:01.30 S postgres: postgres mediaserver [local] idle
 7893 root      20   0   25.4m   1.4m  1.0  1.2   0:00.13 D /var/packages/AudioStation/target/sbin/synoaudiod
  355 root      20   0    0.0m   0.0m  0.5  0.0   0:00.77 S [md0_raid1]
 7099 root      20   0   31.2m   1.7m  0.5  1.5   0:01.63 D /var/packages/MediaServer/target/sbin/dms
 7256 sabnzbd   20   0   16.8m   4.7m  0.5  4.1   0:08.30 D /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/conf+
 7346 root      20   0   35.4m   1.6m  0.5  1.4   0:01.56 D /usr/bin/nmbd -F
 7919 root      20   0   19.5m   0.9m  0.5  0.8   0:00.07 D /var/packages/SynoFinder/target/tool/appindex -a add -p /var/packages/MailServer/target/app/index.conf
    1 root      20   0    4.0m   0.9m  0.0  0.8   0:30.35 S /sbin/init
    2 root      20   0    0.0m   0.0m  0.0  0.0   0:00.01 S [kthreadd]
    3 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [ksoftirqd/0]
    4 root      20   0    0.0m   0.0m  0.0  0.0   0:00.01 S [events/0]
    5 root      20   0    0.0m   0.0m  0.0  0.0   0:00.01 S [khelper]
    8 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [async/mgr]
   95 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [sync_supers]
   97 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [bdi-default]
  105 root      20   0    0.0m   0.0m  0.0  0.0   0:00.12 S [ata/0]
  106 root      20   0    0.0m   0.0m  0.0  0.0   0:00.06 S [ata_aux]
  121 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [rpciod/0]
  130 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [aio/0]
  131 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [nfsiod]
  132 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [crypto/0]
  256 root      20   0    0.0m   0.0m  0.0  0.0   0:00.01 S [scsi_eh_0]
  259 root      20   0    0.0m   0.0m  0.0  0.0   0:00.02 S [scsi_eh_1]
  262 root      20   0    0.0m   0.0m  0.0  0.0   0:00.02 S [scsi_eh_2]
  265 root      20   0    0.0m   0.0m  0.0  0.0   0:00.01 S [scsi_eh_3]
  312 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [scsi_eh_4]
  315 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [scsi_eh_5]
  320 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [mtdblockd]
  344 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [kstriped]
  361 root      20   0    0.0m   0.0m  0.0  0.0   0:00.33 S [md1_raid1]
  458 root      20   0    0.0m   0.0m  0.0  0.0   0:00.02 S [khubd]
  464 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [kethubd]
  672 root      20   0    0.0m   0.0m  0.0  0.0   0:00.04 S [flush-9:0]
  735 root      20   0    0.0m   0.0m  0.0  0.0   0:00.03 S [kjournald]
  821 system    20   0   31.1m   1.3m  0.0  1.2   0:02.11 S /usr/bin/syslog-ng -F --worker-threads=1 -u system -g log
 1253 root      20   0   11.4m   0.6m  0.0  0.5   0:00.21 D /usr/syno/sbin/synologaccd -f
 1308 root      20   0    2.6m   0.3m  0.0  0.3   0:00.18 S /sbin/dbus-daemon --session --fork --print-address
 1328 root      20   0    2.6m   0.3m  0.0  0.2   0:00.27 S /sbin/dbus-daemon --system --nopidfile
 1406 root      20   0   34.4m   0.5m  0.0  0.4   0:00.14 S /usr/syno/sbin/synoconfd -D
 1422 root      20   0    3.1m   0.4m  0.0  0.4   0:00.38 S udevd --daemon
 1485 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [ksnapd]
 1806 root      20   0   38.3m   0.4m  0.0  0.3   0:00.33 S /usr/syno/sbin/synonetd
 1879 root      20   0    0.0m   0.0m  0.0  0.0   0:00.00 S [crypto]

Je ne vois rien de particulièrement alarmant là-dedans ...

Einsteinium · le 30 avril 2017

Effectivement ou alors tu n'as pas capturé au bon moment.

Après le problème vient peu être d'ailleurs, tu as essayé via d'autre poste ou navigateur ?

Minada · le 30 avril 2017

Voici un autre top (le premier était fait 2 minutes après un démarrage) :

Tasks: 191 total,   2 running, 189 sleeping,   0 stopped,   0 zombie
%Cpu(s):  9.9 us, 16.3 sy,  0.0 ni,  0.0 id, 69.9 wa,  1.4 hi,  2.5 si,  0.0 st
GiB Mem :    0.113 total,    0.008 free,    0.056 used,    0.049 buff/cache
GiB Swap:    2.000 total,    1.830 free,    0.169 used.    0.014 avail Mem

  PID USER      PR  NI    VIRT    RES %CPU %MEM     TIME+ S COMMAND
 9702 root      20   0   16.8m   2.9m  1.9  2.5   0:00.12 D /var/packages/MailServer/target/libexec/dovecot/managesieve -k -c /var/packages/MailServer/target/etc/doveco+
   99 root      20   0    0.0m   0.0m  1.4  0.0   0:38.63 S [kblockd/0]
 9663 admin     20   0    5.3m   1.1m  0.9  0.9   0:01.31 R top
 9666 root      20   0   11.4m   0.5m  0.9  0.5   0:00.80 D /var/packages/MailServer/target/libexec/dovecot/managesieve -k -c /var/packages/MailServer/target/etc/doveco+
 6876 root      20   0   39.0m   1.6m  0.8  1.4   0:28.21 D /var/packages/SynoFinder/target/sbin/synoelasticd
 8956 couchpo+  20   0   44.1m   3.0m  0.6  2.6   0:17.00 D /usr/local/couchpotatoserver/env/bin/python /usr/local/couchpotatoserver/share/CouchPotatoServer/CouchPotato+
 9606 root      20   0   40.8m   1.7m  0.6  1.5   0:01.68 D /var/packages/SurveillanceStation/target/sbin/sscored
 8844 sabnzbd   20   0  234.2m   6.3m  0.5  5.4   0:24.45 S /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/conf+
 9645 root      20   0   16.9m   4.0m  0.5  3.5   0:01.42 R /var/packages/MailServer/target/libexec/dovecot/managesieve -k -c /var/packages/MailServer/target/etc/doveco+
 4771 root      20   0   13.3m   1.0m  0.3  0.8   0:04.86 S /usr/syno/sbin/synostoraged
 8100 root      20   0   37.2m   1.6m  0.3  1.3   0:12.32 D /var/packages/HyperBackup/target/bin/synoimgbkptool -e
 8104 root      20   0   37.2m   1.6m  0.3  1.3   0:12.22 D /var/packages/HyperBackup/target/bin/synoimgbkptool -G -y local
 8634 sickbea+  20   0  193.5m   4.4m  0.3  3.8   0:11.24 S /usr/local/sickbeard/env/bin/python /usr/local/sickbeard/share/SickBeard/SickBeard.py --daemon --pidfile /us+
  355 root      20   0    0.0m   0.0m  0.2  0.0   0:02.65 S [md0_raid1]
  821 system    20   0   39.2m   0.8m  0.2  0.7   0:06.05 S /usr/bin/syslog-ng -F --worker-threads=1 -u system -g log
 1806 root      20   0   38.3m   0.2m  0.2  0.2   0:00.51 S /usr/syno/sbin/synonetd
 5528 root      20   0   30.4m   0.8m  0.2  0.7   0:06.98 S /usr/bin/snmpd -fLn -c /etc/snmp/snmpd.conf -p /var/run/snmpd.pid 127.0.0.1:161
 6337 root      20   0   46.5m   0.5m  0.2  0.4   0:04.54 S /usr/bin/smbd -F
 6367 postgres  20   0   50.0m   0.2m  0.2  0.2   0:01.06 D postgres: writer process
 6984 root      20   0   92.4m   0.7m  0.2  0.6   0:16.69 S /usr/syno/bin/scemd
 8032 AudioSt+  15  -5   80.7m   0.8m  0.2  0.7   0:09.51 S /var/packages/AudioStation/target/sbin/synoaudiod
 8103 root      20   0   37.2m   1.6m  0.2  1.3   0:12.02 D /var/packages/HyperBackup/target/bin/synoimgbkptool -U
 8802 root      20   0   37.2m   1.6m  0.2  1.4   0:08.87 D /var/packages/HyperBackupVault/target/bin/synoimgbkptool -L
 9020 root      20   0   30.8m   1.3m  0.2  1.1   0:06.46 D /var/packages/DownloadStation/target/sbin/scheduler
 9650 root      20   0   35.4m   1.7m  0.2  1.5   0:00.65 D /usr/bin/nmbd -F
 9682 root      20   0    3.1m   1.0m  0.2  0.8   0:00.07 D /bin/sh /usr/syno/etc/rc.sysv/avahi.sh avahi-delete-conf

Je ne sais pas si on peut y voir quelque chose de louche, entre le MailServer, kblockd/0 et synoelasticd ... Je n'ai pas assez de connaissance pour déterminer ce qui est normal et ce qui ne l'est pas.

En tout cas mes disques sont toujours en occupation 100%. Pas de rapport avec le navigateur a priori, et l'accès ne fonctionne pas non plus via le partage réseau. J'ai un Raspberry Pi avec Kodi installé dessus qui utilise le NAS comme source en SMB, lui n'arrive pas non plus à le contacter ...

Einsteinium · le 30 avril 2017

Rien ne fait cavalé le proco, on va voir pour les disques durs alors, fait un : smartctl -a /dev/sdX pour chacun de tes disques et colle le résultat.

pour les lettres fait un : cat /proc/mdstat et poste aussi le résultat de ce résultat.

Tu as certainement un disque défaillant.

Minada · le 30 avril 2017

Alors, voilà d'abord le résulta du cat /proc/mdstat :

Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md2 : active raid5 sdb5[0] sda5[4] sdd5[3] sdc5[1]
      5846342016 blocks super 1.1 level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

md1 : active raid1 sda2[3] sdb2[0] sdc2[1] sdd2[2]
      2097088 blocks [4/4] [UUUU]

md0 : active raid1 sda1[3] sdb1[0] sdc1[1] sdd1[2]
      2490176 blocks [4/4] [UUUU]

unused devices: <none>

Du coup j'ai recherché les infos pour les disques sda, sdb, sdc, sdd :

sda :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WDC
Product:              WD30EFRX-68AX9N0
Revision:             80.0
User Capacity:        3,000,592,982,016 bytes [3.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Serial number:        WD-WMC1T1031292
Device type:          disk
Local Time is:        Sun Apr 30 15:10:30 2017 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging


sdb :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SAMSUNG
Product:              HD204UI
Revision:             1AQ1
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
Rotation Rate:        5400 rpm
Form Factor:          3.5 inches
Serial number:        S2H7JD1B110429
Device type:          disk
Local Time is:        Sun Apr 30 15:11:22 2017 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging


sdc :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SAMSUNG
Product:              HD204UI
Revision:             1AQ1
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
Rotation Rate:        5400 rpm
Form Factor:          3.5 inches
Serial number:        S2H7JD1B110425
Device type:          disk
Local Time is:        Sun Apr 30 15:11:54 2017 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging


sdd :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SAMSUNG
Product:              HD204UI
Revision:             1AQ1
User Capacity:        2,000,398,934,016 bytes [2.00 TB]
Logical block size:   512 bytes
Rotation Rate:        5400 rpm
Form Factor:          3.5 inches
Serial number:        S2H7JD1B110431
Device type:          disk
Local Time is:        Sun Apr 30 15:12:15 2017 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported


[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging

Apparemment aucun d'entre eux n'est compatible SMART ... Ce qui est étrange, dans l'interface web j'ai déjà vu par le passé (quand je pouvais encore y accéder) le statut des disques.

Einsteinium · le 30 avril 2017

Rajoute un "-d sat" dans la commande smart

Minada · le 30 avril 2017

Effectivement on a un peu plus d'infos du coup.

SDA :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD30EFRX-68AX9N0
Serial Number:    WD-WMC1T1031292
LU WWN Device Id: 5 0014ee 65840bf48
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Apr 30 15:43:29 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (40020) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 401) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x70bd) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                                              0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time                                                     0x0027   183   177   021    Pre-fail  Always       -       5816
  4 Start_Stop_Count                                                 0x0032   100   100   000    Old_age   Always       -       383
  5 Reallocated_Sector_Ct                                            0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours                                                   0x0032   054   054   000    Old_age   Always       -       33687
 10 Spin_Retry_Count                                                 0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count                                          0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count                                                0x0032   100   100   000    Old_age   Always       -       383
192 Power-Off_Retract_Count                                          0x0032   200   200   000    Old_age   Always       -       11
193 Load_Cycle_Count                                                 0x0032   200   200   000    Old_age   Always       -       371
194 Temperature_Celsius                                              0x0022   105   102   000    Old_age   Always       -       45
196 Reallocated_Event_Count                                          0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector                                           0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable                                            0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate                                            0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SDB :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F4 EG (AF)
Device Model:     SAMSUNG HD204UI
Serial Number:    S2H7JD1B110429
LU WWN Device Id: 5 0024e9 00496670e
Firmware Version: 1AQ10001
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Apr 30 15:44:29 2017 CEST

==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (19620) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 327) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                                              0x002f   100   100   051    Pre-fail  Always       -       3
  2 Throughput_Performance                                           0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time                                                     0x0023   066   065   025    Pre-fail  Always       -       10308
  4 Start_Stop_Count                                                 0x0032   099   099   000    Old_age   Always       -       1048
  5 Reallocated_Sector_Ct                                            0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance                                            0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours                                                   0x0032   100   100   000    Old_age   Always       -       44602
 10 Spin_Retry_Count                                                 0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count                                          0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count                                                0x0032   099   099   000    Old_age   Always       -       1039
181 Program_Fail_Cnt_Total                                           0x0022   100   100   000    Old_age   Always       -       19386572
191 G-Sense_Error_Rate                                               0x0022   100   100   000    Old_age   Always       -       104
192 Power-Off_Retract_Count                                          0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius                                              0x0002   055   049   000    Old_age   Always       -       45 (Min/Max 11/51)
195 Hardware_ECC_Recovered                                           0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count                                          0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector                                           0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable                                            0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate                                            0x002a   100   100   000    Old_age   Always       -       1
223 Load_Retry_Count                                                 0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count                                                 0x0032   100   100   000    Old_age   Always       -       1050

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SDC :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F4 EG (AF)
Device Model:     SAMSUNG HD204UI
Serial Number:    S2H7JD1B110425
LU WWN Device Id: 5 0024e9 004966700
Firmware Version: 1AQ10001
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Apr 30 15:46:06 2017 CEST

==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (20460) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 341) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                                              0x002f   100   100   051    Pre-fail  Always       -       280
  2 Throughput_Performance                                           0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time                                                     0x0023   067   066   025    Pre-fail  Always       -       10168
  4 Start_Stop_Count                                                 0x0032   099   099   000    Old_age   Always       -       1049
  5 Reallocated_Sector_Ct                                            0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance                                            0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours                                                   0x0032   100   100   000    Old_age   Always       -       44597
 10 Spin_Retry_Count                                                 0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count                                          0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count                                                0x0032   099   099   000    Old_age   Always       -       1041
181 Program_Fail_Cnt_Total                                           0x0022   100   100   000    Old_age   Always       -       19386712
191 G-Sense_Error_Rate                                               0x0022   100   100   000    Old_age   Always       -       212
192 Power-Off_Retract_Count                                          0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius                                              0x0002   055   049   000    Old_age   Always       -       45 (Min/Max 11/51)
195 Hardware_ECC_Recovered                                           0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count                                          0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector                                           0x0032   252   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable                                            0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate                                            0x002a   100   100   000    Old_age   Always       -       2
223 Load_Retry_Count                                                 0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count                                                 0x0032   100   100   000    Old_age   Always       -       1052

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SDD :

smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F4 EG (AF)
Device Model:     SAMSUNG HD204UI
Serial Number:    S2H7JD1B110431
LU WWN Device Id: 5 0024e9 00496671a
Firmware Version: 1AQ10001
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Apr 30 15:46:51 2017 CEST

==> WARNING: Using smartmontools or hdparm with this
drive may result in data loss due to a firmware bug.
****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ******
Buggy and fixed firmware report same version number!
See the following web pages for details:
http://knowledge.seagate.com/articles/en_US/FAQ/223571en
http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (20760) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 346) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME                                                   FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate                                              0x002f   100   100   051    Pre-fail  Always       -       5
  2 Throughput_Performance                                           0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time                                                     0x0023   067   065   025    Pre-fail  Always       -       10202
  4 Start_Stop_Count                                                 0x0032   099   099   000    Old_age   Always       -       1049
  5 Reallocated_Sector_Ct                                            0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate                                                  0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance                                            0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours                                                   0x0032   100   100   000    Old_age   Always       -       44593
 10 Spin_Retry_Count                                                 0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count                                          0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count                                                0x0032   099   099   000    Old_age   Always       -       1039
181 Program_Fail_Cnt_Total                                           0x0022   100   100   000    Old_age   Always       -       19386784
191 G-Sense_Error_Rate                                               0x0022   100   100   000    Old_age   Always       -       92
192 Power-Off_Retract_Count                                          0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius                                              0x0002   058   051   000    Old_age   Always       -       42 (Min/Max 11/49)
195 Hardware_ECC_Recovered                                           0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count                                          0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector                                           0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable                                            0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count                                             0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate                                            0x002a   100   100   000    Old_age   Always       -       4
223 Load_Retry_Count                                                 0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count                                                 0x0032   100   100   000    Old_age   Always       -       1051

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ce n'est pas très parlant pour moi mais j'ai l'impression qu'il n'y a pas de problème sur les disques ...

Einsteinium · le 30 avril 2017

Tu as toute les valeurs en instantané ou un disque a pédalé un peu ? Les valeurs sont dans les normes, même si certaine incite au backup.

Je voulais voir si tu avais les attributs de timeout mais non...

Car bon tel que tu le décris c'est un peu le symptôme (j'ai déjà eu, volume occupé, interface très lente et un nas qui fessait la guirlande sur le réseau)

Lorsqu'il reboot ton nas, comme d'habitude ou plutôt long le démarrage ?

Minada · le 30 avril 2017

Je ne saurais pas te dire si un disque a pédalé un peu, vu que même le ssh n'est pas très rapide, les commandes ne s'exécutent pas immédiatement en général et souvent je vois les caractères s'afficher bien après les avoir tapés (ça ne faisait pas ça non plus avant).

Le démarrage est un peu plus long que d'habitude, une fois démarré de ça clignote en permanence. J'ai aussi testé de le démarrer avec le câble réseau débranché, même chose.

Par contre c'est vraiment l'arrêt qui est long, au moins 15 minutes avant que le bouton on/off commence à clignoter ...

Fenrir · le 30 avril 2017

Le ssh devrait être instantané

2 commandes de plus :

uptime (pour avoir le load qui n'est pas dans ton top)
ps aux (pour voir tous les process)

Einsteinium · le 30 avril 2017

Ouai voilà j'allais le dire, le ssh doit resté fluide...

Minada · le 30 avril 2017

uptime me donne ça :

16:25:18 up 2:32, 1 user, load average: 4.28, 4.56, 4.73

 16:25:18 up  2:32,  1 user,  load average: 4.28, 4.56, 4.73

Et ps aux donne ça :

root         1  0.3  0.1   4068   176 ?        Ss   13:52   0:36 /sbin/init
root         2  0.0  0.0      0     0 ?        S    13:52   0:00 [kthreadd]
root         3  0.0  0.0      0     0 ?        S    13:52   0:00 [ksoftirqd/0]
root         4  0.0  0.0      0     0 ?        S    13:52   0:00 [events/0]
root         5  0.0  0.0      0     0 ?        S    13:52   0:00 [khelper]
root         8  0.0  0.0      0     0 ?        S    13:52   0:00 [async/mgr]
root        95  0.0  0.0      0     0 ?        S    13:52   0:00 [sync_supers]
root        97  0.0  0.0      0     0 ?        S    13:52   0:00 [bdi-default]
root        99  1.2  0.0      0     0 ?        S    13:52   1:58 [kblockd/0]
root       105  0.0  0.0      0     0 ?        S    13:52   0:01 [ata/0]
root       106  0.0  0.0      0     0 ?        S    13:52   0:00 [ata_aux]
root       121  0.0  0.0      0     0 ?        S    13:52   0:00 [rpciod/0]
root       129  0.3  0.0      0     0 ?        D<   13:52   0:32 [kswapd0]
root       130  0.0  0.0      0     0 ?        S    13:52   0:00 [aio/0]
root       131  0.0  0.0      0     0 ?        S    13:52   0:00 [nfsiod]
root       132  0.0  0.0      0     0 ?        S    13:52   0:00 [crypto/0]
root       256  0.0  0.0      0     0 ?        S    13:52   0:00 [scsi_eh_0]
root       259  0.0  0.0      0     0 ?        S    13:52   0:00 [scsi_eh_1]
root       262  0.0  0.0      0     0 ?        S    13:52   0:00 [scsi_eh_2]
root       265  0.0  0.0      0     0 ?        S    13:52   0:00 [scsi_eh_3]
root       312  0.0  0.0      0     0 ?        S    13:53   0:00 [scsi_eh_4]
root       315  0.0  0.0      0     0 ?        S    13:53   0:00 [scsi_eh_5]
root       320  0.0  0.0      0     0 ?        S    13:53   0:00 [mtdblockd]
root       344  0.0  0.0      0     0 ?        S    13:53   0:00 [kstriped]
root       355  0.0  0.0      0     0 ?        S    13:53   0:07 [md0_raid1]
root       361  0.0  0.0      0     0 ?        S    13:53   0:07 [md1_raid1]
root       458  0.0  0.0      0     0 ?        S    13:53   0:00 [khubd]
root       464  0.0  0.0      0     0 ?        S    13:53   0:00 [kethubd]
root       735  0.0  0.0      0     0 ?        S    13:53   0:00 [kjournald]
system     821  0.1  1.2  40168  1492 ?        Ssl  13:53   0:14 /usr/bin/syslog-ng -F --worker-threads=1 -u system -g log
root      1253  0.0  0.1  11688   212 ?        Ss   13:53   0:01 /usr/syno/sbin/synologaccd -f
root      1308  0.0  0.0   2624    92 ?        Ss   13:53   0:00 /sbin/dbus-daemon --session --fork --print-address
root      1328  0.0  0.0   2624   100 ?        Ss   13:53   0:00 /sbin/dbus-daemon --system --nopidfile
root      1406  0.0  0.0  35192    96 ?        Ssl  13:53   0:00 /usr/syno/sbin/synoconfd -D
root      1422  0.0  0.0   3212    84 ?        Ss   13:53   0:00 udevd --daemon
root      1485  0.0  0.0      0     0 ?        S    13:53   0:00 [ksnapd]
root      1806  0.0  0.1  39256   124 ?        Ssl  13:53   0:00 /usr/syno/sbin/synonetd
root      1879  0.0  0.0      0     0 ?        S    13:53   0:00 [crypto]
root      1880  0.0  0.0      0     0 ?        S    13:53   0:00 [crypto_ret]
root      2109  0.0  0.0      0     0 ?        S    13:53   0:00 [ecryptfs-kthrea]
root      2935  0.0  0.2  10956   284 ?        SNs  13:54   0:00 /usr/syno/bin/synologrotated
root      3987  0.0  0.0   3800    72 ?        Ss   13:54   0:00 /usr/sbin/dhclient -4 -d -q -lf /tmp/dhcpv4.leases.eth0 -pf /tmp/dhcpcd-eth0.pid -sf /tmp/dhclient-script eth0
root      4044  0.9  0.0      0     0 ?        S    13:54   1:30 [md2_raid5]
root      4142  0.0  0.0      0     0 ?        S    13:54   0:00 [kdmflush]
root      4618  0.0  0.0      0     0 ?        S    13:54   0:01 [jbd2/dm-0-8]
root      4621  0.0  0.0      0     0 ?        S    13:54   0:00 [ext4-dio-unwrit]
root      4744  0.0  0.4  12804   476 ?        Ss   13:54   0:01 /usr/syno/sbin/synocrond
root      4769  0.0  0.0  13668   108 ?        Ss   13:54   0:00 synostoraged
root      4770  0.0  0.2  13668   332 ?        S    13:54   0:01 /usr/syno/sbin/synostoraged
root      4771  0.1  0.8  13668   996 ?        S    13:54   0:15 /usr/syno/sbin/synostoraged
root      4802  0.2  0.0      0     0 ?        S    13:54   0:26 [flush-253:0]
root      5045  0.0  0.0      0     0 ?        S    13:54   0:00 [usbhid_resumer]
root      5059  0.0  1.1   3120  1388 ?        SLs  13:54   0:00 /usr/bin/vmtouch -lfd /var/run
root      5064  0.0  0.0   2192    72 ttyS0    Ss+  13:54   0:00 /sbin/getty 115200 console
root      5211  0.0  0.1  14392   228 ?        Ss   13:54   0:01 /usr/syno/bin/synobackupd
root      5230  0.0  0.2  13960   324 ?        Ss   13:54   0:00 /usr/syno/sbin/hotplugd
root      5528  0.2  0.6  31164   804 ?        Ss   13:54   0:21 /usr/bin/snmpd -fLn -c /etc/snmp/snmpd.conf -p /var/run/snmpd.pid 127.0.0.1:161
root      5579  0.0  0.1  28424   124 ?        S<s  13:54   0:00 synoscgi
root      5644  0.0  0.0  24688    76 ?        S<s  13:54   0:00 /usr/syno/sbin/synocgid -D
root      5681  0.0  0.1  20148   196 ?        Ss   13:54   0:00 /usr/syno/sbin/synosnmpcd
ntp       5723  0.0  0.3  15680   404 ?        Ssl  13:54   0:02 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u ntp:ntp
root      5724  0.0  0.0  19704   116 ?        Ss   13:54   0:00 /usr/syno/bin/s2s_daemon -d
root      5750  0.0  0.1  39360   160 ?        S    13:54   0:00 /usr/bin/netatalk
root      5760  0.0  0.0   1948    60 ?        S    13:54   0:00 /usr/bin/inetd
root      5792  0.0  0.0  23476   108 ?        S<s  13:54   0:00 /usr/syno/bin/findhostd
root      5907  0.0  0.0  13904    76 ?        Ss   13:55   0:00 /usr/bin/sshd
root      5941  0.0  0.0  65984    96 ?        S    13:55   0:01 /usr/bin/afpd -d -F /etc/afp.conf
root      5942  0.0  0.0  13500    92 ?        S    13:55   0:00 /usr/bin/cnid_metad -d -F /etc/afp.conf
system    5955  0.0  0.0  28424    24 ?        S    13:55   0:00 synoscgi
system    5956  0.0  0.0  28424    24 ?        S    13:55   0:00 synoscgi
system    5957  0.0  0.0  28424    24 ?        S    13:55   0:00 synoscgi
system    5958  0.0  0.0  28424    24 ?        S    13:55   0:00 synoscgi
system    5959  0.0  0.0  28424    24 ?        S    13:55   0:00 synoscgi
root      5964  0.0  0.0      0     0 ?        S<   13:55   0:00 [kslowd000]
root      5971  0.0  0.0      0     0 ?        S<   13:55   0:00 [kslowd001]
root      6047  0.0  0.0  23436    76 ?        Ss   13:55   0:00 /usr/bin/ftpd -DPS
root      6170  0.0  0.1   1788   132 ?        Ss   13:55   0:00 /usr/bin/minissdpd -i eth0
postgres  6278  0.0  0.1  51236   148 ?        Ss   13:55   0:02 /usr/bin/postgres -D /var/services/pgsql
root      6337  0.0  0.2  47656   260 ?        Ss   13:55   0:05 /usr/bin/smbd -F
postgres  6366  0.0  0.1  51236   172 ?        Ss   13:55   0:00 postgres: checkpointer process
postgres  6367  0.0  0.1  51236   188 ?        Ss   13:55   0:03 postgres: writer process
postgres  6368  0.0  0.1  51236   152 ?        Ss   13:55   0:05 postgres: wal writer process
root      6434  0.0  0.0      0     0 ?        S<   13:55   0:00 [LIO_rd_dr]
root      6436  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-0]
root      6437  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-1]
root      6438  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-2]
root      6439  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-3]
root      6440  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-4]
root      6441  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-5]
root      6442  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-6]
root      6443  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-7]
root      6444  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-8]
root      6445  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-9]
root      6446  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-10]
root      6447  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-11]
root      6448  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-12]
root      6449  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-13]
root      6450  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-14]
root      6451  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-15]
root      6452  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-16]
root      6453  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-17]
root      6454  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-18]
root      6455  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-19]
root      6456  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-20]
root      6457  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-21]
root      6458  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-22]
root      6459  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-23]
root      6460  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-24]
root      6461  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-25]
root      6462  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-26]
root      6463  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-27]
root      6464  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-28]
root      6465  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-29]
root      6466  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-30]
root      6467  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-0-31]
root      6468  0.0  0.0      0     0 ?        S    13:55   0:00 [LUN-1-0]
root      6470  0.0  0.0      0     0 ?        S    13:55   0:00 [iscsi_trx/1]
root      6471  0.0  0.0      0     0 ?        S<   13:55   0:00 [iscsi_ttx/1]
root      6472  0.0  0.0      0     0 ?        S    13:55   0:00 [iscsi_trx/2]
root      6473  0.0  0.0      0     0 ?        S<   13:55   0:00 [iscsi_ttx/2]
root      6474  0.0  0.0      0     0 ?        S    13:55   0:00 [iscsi_trx/3]
root      6475  0.0  0.0      0     0 ?        S<   13:55   0:00 [iscsi_ttx/3]
root      6476  0.0  0.0      0     0 ?        S    13:55   0:00 [iscsi_trx/4]
root      6477  0.0  0.0      0     0 ?        S<   13:55   0:00 [iscsi_ttx/4]
root      6585  0.0  0.0  10032   108 ?        S<s  13:55   0:00 nginx: master process /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_process on;
root      6588  0.0  0.0  47532    72 ?        S    13:55   0:00 /usr/bin/smbd -F
root      6589  0.0  0.0  47524    60 ?        S    13:55   0:00 /usr/bin/smbd -F
root      6894  0.0  0.1   2880   232 ?        Ss   13:56   0:00 /usr/sbin/crond
root      6984  0.7  1.7 102812  2048 ?        Ssl  13:56   1:09 /usr/syno/bin/scemd
root      7042  0.1  0.1  38236   132 ?        Ss   13:56   0:09 /var/packages/HyperBackupVault/target/bin/img_backupd
root      7178  0.0  0.1  55140   140 ?        Sl   13:56   0:01 /var/packages/iTunesServer/target/sbin/mt-daapd
root      7200  0.1  0.6  47480   740 ?        DLl  13:56   0:12 /usr/syno/sbin/synorelayd
postgres  7202  0.0  0.0  52400    64 ?        Ss   13:56   0:03 postgres: postgres mediaserver [local] idle
root      7215  0.0  0.1 138920   172 ?        Ss   13:56   0:08 php-fpm: master process (/var/packages/PHP5.6/target/usr/local/etc/php56/php-fpm.conf)
root      7313  0.0  0.0  24224   104 ?        Ss   13:56   0:01 sshd: admin [priv]
postgres  7702  0.0  0.0  52316    64 ?        Ss   13:58   0:01 postgres: postgres mediaserver [local] idle
root      7744  0.0  0.4  24224   560 ?        S    13:59   0:02 sshd: admin@pts/2
admin     7755  0.0  0.0   5424   116 pts/2    Ss   13:59   0:00 -sh
AudioSt+  8032  0.4  0.6  82624   804 ?        R<sl 14:00   0:36 /var/packages/AudioStation/target/sbin/synoaudiod
root      8084  0.0  0.0  81964   108 ?        S<l  14:01   0:01 /var/packages/AudioStation/target/bin/pulseaudio --realtime=false
AudioSt+  8252  0.0  0.0   7840   112 ?        S<s  14:02   0:00 /var/packages/AudioStation/target/sbin/synorcd
root      8528  0.0  0.3 116148   460 ?        Ssl  14:06   0:02 /var/packages/MediaServer/target/sbin/dms
MediaSe+  8575  0.0  0.1  28576   160 ?        S    14:06   0:00 /var/packages/MediaServer/target/sbin/lighttpd -f /var/packages/MediaServer/target/etc/lighttpd.debug -m /var/packages/MediaServer/target/lib/lighttpd
sickbea+  8634  2.0  1.6 199928  1984 ?        Sl   14:07   2:47 /usr/local/sickbeard/env/bin/python /usr/local/sickbeard/share/SickBeard/SickBeard.py --daemon --pidfile /usr/local/sickbeard/var/sickbeard.pid --config /usr/local/sic
sabnzbd   8844 18.8 21.9 267456 25972 ?        Sl   14:10  25:28 /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/config.ini --pidfile /usr/local/sabnzbd/var/sabnzbd.pid -d
couchpo+  8956  0.5  2.9  91992  3512 ?        Sl   14:12   0:44 /usr/local/couchpotatoserver/env/bin/python /usr/local/couchpotatoserver/share/CouchPotatoServer/CouchPotato.py --daemon --pid_file /usr/local/couchpotatoserver/var/co
root      9110  0.0  0.1  15680   172 ?        Ss   14:15   0:01 /var/packages/MailServer/target/sbin/dovecot
root      9116  0.0  0.1  15500   204 ?        S    14:15   0:01 dovecot/log
root      9172  0.0  0.1  23436   156 ?        Ss   14:16   0:00 /var/packages/MailServer/target/sbin/syno_mailserverd
root      9650  0.3  0.3  36676   456 ?        Ss   14:26   0:27 /usr/bin/nmbd -F
root      9819  0.0  0.3   4360   448 ?        S    14:29   0:00 avahi-daemon: running [Skynet.local]
http      9857  0.0  0.0  10036    88 ?        S<   14:29   0:00 nginx: worker process
root      9959  0.0  0.2  66236   244 ?        Ssl  14:31   0:03 /var/packages/SurveillanceStation/target/sbin/sscored
root     10277  0.2  0.9 148472  1172 ?        Ssl  14:38   0:18 /var/packages/SynoFinder/target/sbin/synoelasticd
root     10796  0.0  0.2  60680   300 ?        Ssl  14:49   0:01 /var/packages/SurveillanceStation/target/sbin/sslogd
root     10929  0.0  0.2  91428   312 ?        Ssl  14:52   0:02 /var/packages/SurveillanceStation/target/sbin/ssnotifyd
root     11558  0.0  0.2  84696   244 ?        Ssl  15:05   0:00 /var/packages/SurveillanceStation/target/sbin/ssroutined
Downloa+ 11582  0.1  0.3  57696   404 ?        Ss   15:05   0:05 /var/packages/DownloadStation/target/sbin/scheduler
postgres 11594  0.1  0.1  52408   128 ?        Ss   15:06   0:08 postgres: DownloadStation download [local] idle
postgres 11684  0.0  0.1  52288   128 ?        Ss   15:08   0:00 postgres: DownloadStation download [local] idle
Downloa+ 11695  0.0  0.1  27684   168 ?        Ss   15:08   0:00 /var/packages/DownloadStation/target/sbin/synodldbrpcd
postgres 11708  0.2  0.1  52388   128 ?        Ss   15:08   0:09 postgres: DownloadStation download [local] idle
root     11770  0.0  0.1   5964   168 pts/2    S    15:09   0:00 sudo sh
root     11788  0.0  0.6   5448   788 pts/2    S    15:09   0:00 sh
root     11802  0.0  0.3  70584   456 ?        Ssl  15:10   0:02 /var/packages/SurveillanceStation/target/sbin/ssrotated
root     11899  0.0  0.2  41276   348 ?        S<s  15:12   0:01 /var/packages/SurveillanceStation/target/sbin/ssfindhostd
root     12038  0.1  0.4  70496   536 ?        Ssl  15:14   0:05 /var/packages/SurveillanceStation/target/sbin/ssactruled
root     12078  0.0  0.1  41148   188 ?        Ss   15:15   0:00 /var/packages/SurveillanceStation/target/sbin/ssrtpdataproviderd
root     12141  0.0  0.2  41276   284 ?        Ss   15:17   0:00 /var/packages/SurveillanceStation/target/sbin/ssrtspserverd
root     12518  0.1  0.4  78560   588 ?        Ssl  15:24   0:04 /var/packages/SurveillanceStation/target/sbin/ssdaemonmonitord
root     13255  0.0  0.0      0     0 ?        S    15:40   0:00 [flush-9:0]
root     15123  0.0  1.0   5336  1220 pts/2    R+   16:26   0:00 ps aux

J'ai remarqué que depuis environ 20 minutes sabnzbd est monté à fond niveau CPU, mais il semble être redescendu maintenant ...

Fenrir · le 30 avril 2017

il y a 5 minutes, Minada a dit :

sabnzbd 8844 18.8 21.9 267456 25972 ? Sl 14:10 25:28 /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/config.ini --pidfile /usr/local/sabnzbd/var/sabnzbd.pid -d

Arrête ce paquet (ou kill le process) et regarde si ça va mieux après

edit : je n'avais pas vu ta remarque, coupe le tout de même

Modifié le 30 avril 2017 par Fenrir

Minada · le 30 avril 2017

Ok, ça semble m'avoir rendu la main, j'ai pu accéder à l'interface DSM en moins de 10 secondes et j'arrive à charger le lecteur réseau !

C'est étrange car je pense que le problème initial ne venait pas de lui mais plutôt de l'indexation des photos ... Il a probablement dû attendre une semaine avant de réussir à faire son job une fois que j'ai déplacé les photos ... Par contre j'ai toujours les disques en accès selon leur LED de status.

Je vais monitorer l'évolution de la situation et faire les mises à jour puis remettre progressivement mes photos dans leur répertoire ... Pourtant Photo Station est arrêté chez moi, l'indexation devrait l'être aussi !

Merci pour les conseils et je vous tiens au courant d'ici ce soir si la situation reste stable :)

Modifié le 30 avril 2017 par Minada

Fenrir · le 30 avril 2017

L'indexation n'est pas uniquement liée à photostation.

Einsteinium · le 30 avril 2017

Comportement étrange pour SABnzbd surtout, stop ce paquet avant qu'il ne se relance.

Minada · le 30 avril 2017

C'est fréquent que SABnzbd prenne beaucoup de ressources, quand il y a des gros fichiers à réparer en PAR ...

Minada · le 30 avril 2017

Bon, après une redémarrage le problème est revenu, j'ai à nouveau kill le process sabnzbd mais ça n'a pas suffi.

Du coup je me suis rappelé que j'avais fait une manipulation tout à l'heure pour arrêter l'indexation :

/usr/syno/sbin/synoservice --hard-stop synoindexd
/usr/syno/sbin/synoservice --hard-stop synomkthumbd

Immédiatement après avoir fait ça, tout redevient normal.

Comment faire pour cette indexation ? Si j'ai bien compris, elle se déroule uniquement quand j'ajoute de nouvelles photos, et des miniatures sont créées en même temps ce qui prend du temps et des ressources ?

Fenrir · le 30 avril 2017

L'indexation prend le temps qu'il faut, mais s'il s'agit de photos, tu as un soft officiel permettant d'accéelerer certaines étapes :

Citation

Photo Station Uploader
Photo Station Uploader est une application qui permet de transférer des photos et des vidéos en masse depuis votre ordinateur vers Photo Station. Elle crée des miniatures et convertit les vidéos en des formats de haute qualité grâce à la puissance de traitement de votre ordinateur, sans consommer les ressources système de votre NAS. Il suffit de sélectionner les fichiers dans l'explorateur de fichiers Windows ou le Finder de Mac et de cliquer sur le bouton droit pour procéder au transfert.
Windows:

Télécharger (exe) | MD5

Mac:

Télécharger (dmg) | MD5

Mac (OS X 10.6 & 10.7):

Télécharger (dmg) | MD5

Release Note

https://www.synology.com/fr-fr/support/download/DS411j

Minada · le 30 avril 2017

Parfait merci, je vais tester ça et voir si ça résout mon problème !

Olivier Mathieu · le 11 mars 2018

Bonjour

je me permet de relancer ce fil de discussion car j'ai le même soucis.

je n'ai plus accès à l'interface et aux service de mon syno 5 min après son démarrage !!

Quand je me loge en Ssh c'est aussi très lent ....

Les LED des disques n'arrêtent pas de clignoter ....

voici mon "uptime"

Citation

14:49:22 up 17 min, 1 user, load average: 33.67, 30.05, 18.9

et mon "ps aux"

Citation

USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.7 0.4 24864 4408 ? Ss 14:32 0:08 /sbin/init
root 2 0.0 0.0 0 0 ? S 14:32 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S 14:32 0:00 [ksoftirqd/0]
root 5 0.0 0.0 0 0 ? S< 14:32 0:00 [kworker/0:0H]
root 6 0.1 0.0 0 0 ? D 14:32 0:02 [kworker/u8:0]
root 7 1.2 0.0 0 0 ? S 14:32 0:13 [migration/0]
root 8 0.0 0.0 0 0 ? S 14:32 0:00 [rcu_bh]
root 9 0.2 0.0 0 0 ? S 14:32 0:02 [rcu_sched]
root 10 0.0 0.0 0 0 ? S 14:32 0:00 [watchdog/0]
root 11 0.0 0.0 0 0 ? S 14:32 0:00 [watchdog/1]
root 12 0.1 0.0 0 0 ? S 14:32 0:01 [migration/1]
root 13 0.0 0.0 0 0 ? S 14:32 0:01 [ksoftirqd/1]
root 14 0.2 0.0 0 0 ? R 14:32 0:03 [kworker/1:0]
root 15 0.0 0.0 0 0 ? S< 14:32 0:00 [kworker/1:0H]
root 16 0.0 0.0 0 0 ? S< 14:32 0:00 [khelper]
root 17 0.0 0.0 0 0 ? S 14:32 0:00 [kdevtmpfs]
root 18 0.0 0.0 0 0 ? S< 14:32 0:00 [netns]
root 19 0.1 0.0 0 0 ? D 14:32 0:01 [kworker/u8:1]
root 177 0.0 0.0 0 0 ? S< 14:32 0:00 [writeback]
root 181 0.0 0.0 0 0 ? S< 14:32 0:00 [kintegrityd]
root 182 0.0 0.0 0 0 ? S< 14:32 0:00 [bioset]
root 183 0.0 0.0 0 0 ? S< 14:32 0:00 [crypto]
root 185 0.0 0.0 0 0 ? S< 14:32 0:00 [kblockd]
root 293 0.0 0.0 0 0 ? S< 14:32 0:00 [ata_sff]
root 303 0.0 0.0 0 0 ? S< 14:32 0:00 [md]
root 448 0.0 0.0 0 0 ? S< 14:32 0:00 [rpciod]
root 449 0.1 0.0 0 0 ? S 14:32 0:02 [kworker/0:1]
root 490 0.0 0.0 0 0 ? S 14:32 0:00 [khungtaskd]
root 506 18.9 0.0 0 0 ? R< 14:32 3:21 [kswapd0]
root 511 0.0 0.0 0 0 ? SN 14:32 0:00 [ksmd]
root 513 0.0 0.0 0 0 ? S 14:32 0:00 [fsnotify_mark]
root 515 0.0 0.0 0 0 ? S< 14:32 0:00 [nfsiod]
root 2901 0.0 0.0 0 0 ? S< 14:32 0:00 [iscsi_eh]
root 2939 0.0 0.0 0 0 ? S 14:32 0:00 [scsi_eh_0]
root 2953 0.0 0.0 0 0 ? S 14:32 0:00 [scsi_eh_1]
root 2971 0.0 0.0 0 0 ? D 14:32 0:00 [kworker/u8:2]
root 3079 0.0 0.0 0 0 ? S 14:32 0:00 [scsi_eh_2]
root 3228 0.0 0.0 0 0 ? S< 14:32 0:00 [raid5wq]
root 3262 0.0 0.0 0 0 ? S< 14:32 0:00 [deferwq]
root 3374 0.0 0.0 0 0 ? S 14:32 0:00 [khubd]
root 3380 0.0 0.0 0 0 ? S 14:32 0:00 [kethubd]
root 3549 0.1 0.0 0 0 ? S< 14:32 0:01 [kworker/0:1H]
root 3550 0.1 0.0 0 0 ? S< 14:32 0:01 [kworker/1:1H]
root 3553 0.0 0.0 0 0 ? S< 14:32 0:00 [bioset]
root 3554 0.0 0.0 0 0 ? S 14:32 0:00 [md0_raid1]
root 3572 0.0 0.0 0 0 ? S< 14:32 0:00 [bioset]
root 3574 0.0 0.0 0 0 ? S 14:32 0:00 [md1_raid1]
root 3712 0.0 0.0 0 0 ? S< 14:32 0:00 [ext4-group-desc]
root 3713 0.0 0.0 0 0 ? S 14:32 0:00 [jbd2/md0-8]
root 3714 0.0 0.0 0 0 ? S< 14:32 0:00 [ext4-dio-unwrit]
root 3757 0.0 0.1 17272 1184 ? Ss 14:32 0:00 /usr/bin/cgmanager --sigstop
system 3832 0.3 0.4 900720 4260 ? Ssl 14:32 0:03 /usr/bin/syslog-ng -F --worker-threads=2 -u system -g log
root 4335 0.0 0.3 69584 3288 ? Ss 14:33 0:00 /usr/syno/sbin/synologaccd -f
root 4471 0.0 0.0 13120 684 ? Ss 14:33 0:00 /sbin/dbus-daemon --system --nopidfile
root 4476 0.0 0.0 13120 740 ? Ss 14:33 0:00 /sbin/dbus-daemon --session --fork --print-address
root 4482 0.0 0.1 75008 1808 ? SNs 14:33 0:00 /usr/syno/bin/synologrotated
root 4536 0.0 0.3 287428 2892 ? Ssl 14:33 0:00 /usr/syno/sbin/synoconfd -D
root 4575 0.0 0.1 278072 1744 ? Ssl 14:33 0:00 /usr/syno/sbin/synonetd
root 4711 0.0 0.0 0 0 ? S 14:33 0:00 [ecryptfs-kthrea]
root 4862 0.0 0.0 17884 596 ? Ss 14:33 0:00 udevd --daemon
root 5650 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/1:2]
root 5660 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset]
root 5943 0.2 0.0 0 0 ? S 14:33 0:02 [kworker/0:2]
root 6077 0.0 0.1 12108 976 ? Ss 14:33 0:00 /usr/sbin/ovsdb-server /usr/syno/etc/synoovs/conf.db --remote=punix:/var/run/openvs
root 6097 0.2 0.2 235180 1980 ? Ssl 14:33 0:02 /usr/sbin/ovs-vswitchd --pidfile --detach --log-file -v:syslog:off -vbond:file:warn
root 6836 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset]
root 6837 0.0 0.0 0 0 ? S 14:33 0:00 [md3_raid1]
root 6848 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset]
root 6851 0.0 0.0 0 0 ? S 14:33 0:00 [md2_raid1]
root 7106 0.0 0.0 0 0 ? S< 14:33 0:00 [kdmflush]
root 7109 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset]
root 7509 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-worker]
root 7511 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-worker-hi]
root 7512 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-delalloc]
root 7513 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-flush_del]
root 7514 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-cache]
root 7515 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-submit]
root 7516 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-fixup]
root 7517 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio]
root 7518 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-met]
root 7521 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-met]
root 7522 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-rai]
root 7523 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-rmw]
root 7524 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-wri]
root 7525 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-freespace]
root 7526 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-delayed-m]
root 7527 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-readahead]
root 7528 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-reada-pat]
root 7529 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-qgroup-re]
root 7530 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-usrquota-]
root 7531 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-extent-re]
root 7566 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/u8:3]
root 7570 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/u8:4]
root 7574 0.2 0.0 0 0 ? D 14:33 0:02 [kworker/u8:5]
root 7870 0.0 0.0 0 0 ? S 14:33 0:00 [btrfs-cleaner]
root 7876 0.0 0.0 0 0 ? S 14:33 0:00 [btrfs-transacti]
root 8741 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/u8:7]
root 8784 0.0 0.1 76836 1580 ? Ss 14:33 0:00 /usr/syno/sbin/synocrond
root 8785 0.0 0.0 85604 676 ? Ss 14:33 0:00 synostoraged
root 8786 0.0 0.0 85604 688 ? S 14:33 0:00 /usr/syno/sbin/synostoraged
root 8787 0.0 0.2 85604 1880 ? S 14:33 0:00 /usr/syno/sbin/synostoraged
root 8809 0.2 0.6 226200 6436 ? Ss 14:33 0:02 /usr/bin/snmpd -fLn -c /etc/snmp/snmpd.conf -p /var/run/snmpd.pid 127.0.0.1:161
root 8847 0.0 0.3 114756 2888 ? Ss 14:33 0:00 /usr/syno/sbin/ddnsd
root 8890 0.0 0.3 242076 3700 ? S<s 14:33 0:00 synoscgi
root 8932 0.0 0.4 113988 3796 ? Ss 14:33 0:00 /usr/syno/sbin/synosnmpcd
root 8939 0.0 0.2 112360 2344 ? Ss 14:33 0:00 /usr/syno/sbin/heartbeatd
root 8983 0.0 0.0 194804 776 ? S<s 14:33 0:00 /usr/syno/bin/findhostd
ntp 8993 0.0 0.1 96240 1608 ? Ssl 14:33 0:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u ntp:ntp
root 9099 0.0 0.0 177836 792 ? Ss 14:33 0:00 /usr/bin/rsync --daemon
system 9103 0.0 0.0 242076 272 ? S 14:33 0:00 synoscgi
system 9104 0.0 0.0 242076 272 ? S 14:33 0:00 synoscgi
system 9105 0.0 0.0 242076 272 ? S 14:33 0:00 synoscgi
root 9189 0.0 0.3 82460 3352 ? Ss 14:33 0:00 /usr/bin/sshd
root 9194 0.0 0.0 4188 200 ? Ss 14:33 0:00 /usr/bin/minissdpd -i ovs_eth0
root 9403 0.0 0.0 0 0 ? S 14:33 0:00 [scsi_eh_3]
root 9404 0.0 0.0 0 0 ? S 14:33 0:00 [usb-storage]
root 9610 0.0 0.0 0 0 ? D 14:33 0:00 [Syno_HDDMon]
root 9682 0.0 0.2 6224 2324 ? SLs 14:33 0:00 /usr/bin/vmtouch -lfd /var/run
root 9686 0.0 0.0 8584 580 ttyS0 Ss+ 14:33 0:00 /sbin/getty 115200 console
root 9713 0.0 0.3 92352 2828 ? Ss 14:33 0:00 /usr/syno/bin/synobackupd
root 9868 0.0 0.3 229708 3612 ? S<s 14:33 0:00 /usr/syno/sbin/synocgid -D
root 9869 0.0 0.1 62356 1196 ? SNs 14:33 0:00 /usr/syno/sbin/synomkthumbd
root 9870 0.0 0.1 62344 1196 ? SNs 14:33 0:00 /usr/syno/sbin/synomkflvd
root 9905 0.0 0.1 89824 1800 ? Ss 14:33 0:00 /usr/syno/sbin/hotplugd
root 9908 0.0 0.0 0 0 ? S 14:33 0:00 [RODSP_ODX_LOGIN]
root 9909 0.0 0.0 0 0 ? S 14:33 0:00 [RODSP_VLUN_LOGI]
root 9911 0.0 0.0 0 0 ? S 14:33 0:00 [RODSP_VDISK_LOG]
root 9913 0.0 0.2 135316 1960 ? Ss 14:33 0:00 /usr/syno/bin/s2s_daemon -d
root 9914 0.0 0.0 0 0 ? S< 14:33 0:00 [rodsp_aio]
root 9926 0.0 0.0 0 0 ? S< 14:33 0:00 [target_completi]
root 9929 0.0 0.0 0 0 ? S< 14:33 0:00 [tmr-rd_mcp]
root 9930 0.0 0.0 0 0 ? S< 14:33 0:00 [xcopy_wq]
root 9935 0.0 0.3 320544 2816 ? SNsl 14:33 0:00 /usr/syno/sbin/synocontentextractd
root 9970 0.0 0.1 188800 1000 ? Ss 14:33 0:00 /usr/bin/ftpd -DS
root 9976 0.1 0.1 93112 1648 ? SNsl 14:33 0:01 /usr/syno/sbin/synotifyd
root 9980 0.0 0.1 111376 1832 ? S 14:33 0:00 /usr/bin/netatalk
root 10094 0.0 0.3 246772 3248 ? SNsl 14:33 0:00 /usr/syno/bin/iscsi_snapshot_comm_core -D
root 10102 0.0 0.3 99316 3260 ? SNs 14:33 0:00 /usr/syno/bin/iscsi_snapshot_server -D
root 10162 0.0 0.3 191760 3332 ? S 14:33 0:00 /usr/bin/afpd -d -F /etc/afp.conf
root 10163 0.0 0.3 87484 2836 ? S 14:33 0:00 /usr/bin/cnid_metad -d -F /etc/afp.conf
root 10322 0.0 0.4 395088 4072 ? Ss 14:33 0:00 /usr/bin/smbd -F
root 10341 0.0 0.0 0 0 ? S< 14:33 0:00 [cifsiod]
root 10409 0.0 0.2 252732 2336 ? SNs 14:33 0:00 /usr/syno/sbin/synocontentextractd
root 10410 0.0 0.0 246812 608 ? SNs 14:33 0:00 /usr/syno/sbin/synocontentextractd
postgres 10434 0.0 0.1 155736 960 ? Ss 14:33 0:00 /usr/bin/postgres -D /var/services/pgsql
root 10440 0.0 0.0 395068 412 ? S 14:33 0:00 /usr/bin/smbd -F
root 10441 0.0 0.0 395060 376 ? S 14:33 0:00 /usr/bin/smbd -F
root 10453 0.0 0.0 395092 512 ? S 14:33 0:00 /usr/bin/smbd -F
root 10454 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F
root 10455 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F
root 10456 0.0 0.2 399476 2252 ? S 14:33 0:00 /usr/bin/smbd -F
root 10457 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F
root 10458 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F
postgres 10572 0.0 0.1 155868 1796 ? Ss 14:33 0:00 postgres: checkpointer process
postgres 10573 0.0 0.0 155736 384 ? Ss 14:33 0:00 postgres: writer process
postgres 10574 0.0 0.0 155736 416 ? Ss 14:33 0:00 postgres: wal writer process
root 10748 0.1 0.2 44644 2564 ? S<s 14:33 0:01 nginx: master process /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_proce
root 10818 0.0 0.1 62332 1084 ? SNs 14:33 0:00 /usr/syno/sbin/synoindexd
root 10981 0.0 0.1 11720 1020 ? Ss 14:33 0:00 /bin/sh -e /proc/self/fd/9
root 10984 0.1 0.5 248668 4784 ? S 14:33 0:01 /usr/syno/sbin/synopkgctl wait --timeout 3600 --check_interval 10 bootup
root 11512 0.0 0.1 72876 1792 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/PHP7.0/target/usr/local/etc/php70/php-fpm.co
root 11635 0.0 0.0 7220 628 ? Ss 14:33 0:00 /usr/sbin/crond
root 11650 0.2 0.3 776044 3368 ? Ssl 14:33 0:02 /usr/syno/bin/scemd
root 11705 0.0 0.4 233756 3912 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/PHP5.6/target/usr/local/etc/php56/php-fpm.co
root 11709 0.0 0.2 179828 1968 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/WebStation/target/misc/php70_fpm.conf)
root 11760 1.4 0.7 257300 6616 ? SLl 14:33 0:13 /usr/syno/sbin/synorelayd
root 11778 0.0 0.1 11716 1028 ? Ss 14:33 0:00 /bin/sh -e /proc/self/fd/9
root 11792 0.0 0.4 337108 3972 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/WebStation/target/misc/php56_fpm.conf)
root 11794 0.0 0.4 248760 3944 ? S 14:33 0:00 /usr/syno/sbin/synopkgctl start MailPlus-Server
root 11845 0.0 0.2 415628 2116 ? Ssl 14:33 0:00 /var/packages/LogCenter/target/usr/bin/syslog-ng --cfgfile=/var/packages/LogCenter/
root 11857 0.0 0.2 62352 2508 ? SN 14:33 0:00 /usr/syno/sbin/synoindexscand
root 11858 0.0 0.2 62332 2536 ? SN 14:33 0:00 /usr/syno/sbin/synoindexworkerd
root 11860 0.0 0.4 292964 3764 ? SN 14:33 0:00 /usr/syno/sbin/synoindexplugind
root 11861 0.0 0.2 110548 2620 ? SN 14:33 0:00 /usr/syno/sbin/synomediaparserd
root 12219 0.0 0.0 253528 644 ? Ss 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer
root 12225 0.0 0.0 250544 384 ? S 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer
synocal+ 12233 0.0 0.1 233756 976 ? S 14:33 0:00 php-fpm: pool Calendar
synocal+ 12234 0.0 0.1 233756 976 ? S 14:33 0:00 php-fpm: pool Calendar
root 12245 0.0 0.0 343652 356 ? Sl 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer
root 12250 0.0 0.0 343652 356 ? Sl 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer
root 12656 0.0 0.1 11920 1064 ? S 14:34 0:00 /bin/sh /usr/local/mariadb10/bin/mysqld_safe --datadir=/var/packages/MariaDB10/targ
http 12849 0.0 0.0 14960 708 ? Ss 14:34 0:00 /var/packages/WebStation/target/usr/bin/multiwatch -f 2 -- /var/packages/WebStation
mysql 12876 0.5 1.0 1391588 10016 ? Sl 14:34 0:04 /usr/local/mariadb10/bin/mysqld --basedir=/usr/local/mariadb10 --datadir=/var/packa
http 12888 0.0 0.0 8420 268 ? S 14:34 0:00 /var/packages/WebStation/target/usr/bin/fcgiwrap
http 12889 0.0 0.0 8420 268 ? S 14:34 0:00 /var/packages/WebStation/target/usr/bin/fcgiwrap
root 13142 0.0 0.0 0 0 ? S< 14:34 0:00 [kworker/u9:1]
root 13147 0.0 0.3 292068 3572 ? Ss 14:34 0:00 /var/packages/HyperBackupVault/target/bin/img_backupd
root 13159 0.0 0.3 122324 3216 ? Ss 14:34 0:00 /usr/bin/upnpd
root 13229 0.0 0.1 12868 1572 ? S 14:34 0:00 /bin/sh /var/packages/MailPlus-Server/scripts/start-stop-status start
root 13366 6.3 1.2 457168 12072 ? Ssl 14:34 1:00 /var/packages/SynoFinder/target/sbin/synoelasticd
root 13450 0.0 0.0 395092 360 ? S 14:34 0:00 /usr/bin/smbd -F
root 13452 0.0 0.0 395092 364 ? S 14:34 0:00 /usr/bin/smbd -F
root 13454 0.0 0.0 395092 372 ? S 14:34 0:00 /usr/bin/smbd -F
root 13457 0.0 0.0 395092 364 ? S 14:34 0:00 /usr/bin/smbd -F
root 13458 0.0 0.0 395092 360 ? S 14:34 0:00 /usr/bin/smbd -F
root 13644 0.0 0.1 478996 1756 ? Ssl 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13647 0.0 0.0 405264 520 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13648 0.0 0.0 405264 520 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13658 0.0 0.1 342040 1856 ? SNsl 14:34 0:00 /var/packages/SynoFinder/target/sbin/fileindexd
root 13663 0.0 0.4 255328 4536 ? S 14:34 0:00 /var/packages/SynoFinder/target/tool/appindex -a add -p /var/packages/SynoFinder/ta
root 13664 0.0 0.1 319776 1108 ? S<s 14:34 0:00 /usr/local/bin/notification_send
Synolog+ 13744 0.0 0.1 21152 1416 ? Ss 14:34 0:00 /var/packages/SynologyApplicationService/target/daemon/pgbouncer -q /var/packages/S
root 13853 0.0 0.0 478996 528 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13854 0.0 0.0 478996 528 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13855 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13856 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13857 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13858 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13859 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13860 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd
root 13929 0.0 0.3 913248 2900 ? Ssl 14:34 0:00 node VapidSendServer.js
root 14065 0.0 0.0 99252 856 ? Ss 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/httpd22
http 14342 0.0 0.0 99252 384 ? S 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/httpd22
http 14344 0.0 0.0 99252 388 ? S 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/fcgi-pm
http 14367 0.0 0.0 1363336 708 ? Sl 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/httpd22
root 14889 0.1 0.0 0 0 ? S 14:34 0:01 [kworker/u8:10]
root 15317 0.0 0.4 177288 4204 ? Ss 14:34 0:00 sshd: Olivier [priv]
Downloa+ 15383 0.0 0.2 281856 2612 ? Ss 14:34 0:00 /var/packages/DownloadStation/target/sbin/scheduler
postgres 15385 0.0 0.1 159608 1012 ? Ss 14:34 0:00 postgres: DownloadStation download [local] idle
root 15394 0.0 0.0 177288 496 ? R 14:34 0:00 sshd: Olivier@pts/3
Olivier 15395 0.0 0.1 26072 1480 pts/3 Ss 14:34 0:00 -sh
postgres 15419 0.0 0.1 159036 968 ? Ss 14:35 0:00 postgres: DownloadStation download [local] idle
Downloa+ 15420 0.0 0.1 219336 1016 ? Ss 14:35 0:00 /var/packages/DownloadStation/target/sbin/synodldbrpcd
root 15424 0.0 0.1 262584 1692 ? Ss 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-notifyd
postgres 15426 0.0 0.1 159152 988 ? Ss 14:35 0:00 postgres: DownloadStation download [local] idle
root 15429 0.0 0.1 391088 1724 ? SNsl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-vmtouchd
root 15445 0.0 0.2 436044 2500 ? Ssl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-cached
root 15450 0.0 0.0 26508 500 ? Ss 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-authd
root 15458 0.0 0.3 271700 2800 ? Ssl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-cleand
root 15464 0.6 0.6 559512 6084 ? Ssl 14:35 0:05 /var/packages/SynologyDrive/target/sbin/syno-cloud-clientd
root 15488 0.0 0.2 307540 2748 ? Ss 14:35 0:00 /var/packages/SynologyDrive/target/sbin/syncd
root 15490 0.0 0.3 1050332 3368 ? Sl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/syncd
root 15492 0.0 0.3 947932 2960 ? Sl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/syncd
root 15613 0.3 0.7 284420 7184 ? Dl 14:35 0:03 python2.7 /usr/bin/twistd caldav -f /var/packages/CardDAVServer/target/etc/syno_cal
root 15634 0.1 0.0 0 0 ? D 14:35 0:01 [kworker/u8:11]
postgres 15640 0.0 0.3 159528 2796 ? Ss 14:35 0:00 postgres: postgres caldav [local] idle
root 15750 0.0 0.1 561268 1856 ? Ssl 14:35 0:00 synoscgi --m
http 15890 0.7 1.1 351308 10508 ? D 14:35 0:06 php-fpm: pool www
MailPlu+ 15938 0.1 0.1 34952 1188 ? S<sl 14:35 0:01 /var/packages/MailPlus-Server/target/usr/bin/redis-server *:8500
MailPlu+ 16026 0.0 0.0 329036 736 ? Ssl 14:35 0:00 /var/packages/MailPlus-Server/target/usr/bin/memcached -I 7m -u MailPlus-Server -p
root 16029 0.7 0.5 312176 4892 ? S<sl 14:35 0:06 /var/packages/MailPlus-Server/target/usr/bin/syno-mailplus-server-go-utils --ca-dir
root 16156 1.1 0.3 212804 3024 ? S 14:35 0:09 /bin/python2.7 /usr/bin/twistd -u root -g root --reactor=select -n caldav -f /var/p
root 16157 1.1 0.8 212420 8296 ? D 14:35 0:09 /bin/python2.7 /usr/bin/twistd -u root -g root --reactor=select -n caldav -f /var/p
root 16685 0.0 0.1 417096 1212 ? Ssl 14:36 0:00 synoscgi --m
root 16689 0.0 0.0 343364 588 ? Ss 14:36 0:00 synoscgi --m
root 16690 0.0 0.0 343364 592 ? Ss 14:36 0:00 synoscgi --m
root 16696 0.0 0.3 912756 2928 ? Ssl 14:36 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node /var/packages/Spreadsheet/target
root 16705 0.0 0.3 1016480 2988 pts/24 Ssl+ 14:36 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node --max_old_space_size=1024 /var/p
root 16712 0.1 0.3 950880 2992 pts/26 Ssl+ 14:36 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node --max_old_space_size=1024 /var/p
root 16725 0.1 0.3 954864 2984 pts/27 Ssl+ 14:36 0:01 /var/packages/Node.js_v4/target/usr/local/bin/node --max_old_space_size=1024 /var/p
root 16944 0.1 0.3 917232 2848 ? Sl 14:36 0:00 /volume1/@appstore/Node.js_v4/usr/local/bin/node /volume1/@appstore/Spreadsheet/ser
http 17188 0.5 0.7 354452 6652 ? D 14:36 0:04 php-fpm: pool www
root 18045 0.0 0.0 561268 568 ? Ss 14:37 0:00 synoscgi --m
system 18095 0.0 0.0 242076 260 ? S 14:37 0:00 synoscgi
http 18310 0.5 1.1 354784 10824 ? D 14:37 0:04 php-fpm: pool www
root 18380 0.0 0.3 556904 3684 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-task-center
postgres 18383 0.0 0.3 159040 2852 ? Ss 14:37 0:00 postgres: SynologyMoments synophoto [local] idle
root 18443 0.0 0.1 73080 1036 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-thumb
root 18449 0.0 0.1 75668 1524 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-geocoding
root 18451 0.0 0.1 75668 1544 ? SNsl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-face-extraction
root 18453 0.0 0.1 75668 1536 ? SNsl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-concept
root 18454 0.0 0.1 75668 1528 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-person-clustering
http 18564 0.6 1.0 350852 9992 ? D 14:37 0:04 php-fpm: pool www
Synolog+ 18671 0.0 0.1 342848 1736 ? S<sl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-thumbnail-provider
postgres 18673 0.0 0.0 158908 804 ? Ss 14:37 0:00 postgres: SynologyMoments synophoto [local] idle
root 18810 0.0 0.1 558560 1204 ? Ssl 14:38 0:00 synoscgi --m
root 18813 0.0 0.0 484828 588 ? Ss 14:38 0:00 synoscgi --m
root 18814 0.0 0.0 484828 592 ? Ss 14:38 0:00 synoscgi --m
root 18988 0.0 0.1 125244 1392 ? S<sl 14:38 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-user-check
http 19011 0.0 0.1 42596 1580 ? S< 14:38 0:00 nginx: worker process is shutting down
http 19118 0.3 1.2 346700 12012 ? D 14:38 0:02 php-fpm: pool www
http 19184 0.3 1.0 346000 10140 ? D 14:38 0:02 php-fpm: pool www
root 19286 0.0 0.1 285476 968 ? S< 14:38 0:00 /var/packages/MailPlus-Server/target/bin/syno_action antivirus anti_virus_quarantin
root 19287 0.0 0.1 12280 1144 ? Ss 14:38 0:00 /bin/sh /var/packages/MailPlus-Server/target/scripts/daemon/clamav.sh update_local_
root 19308 0.0 0.4 269376 3824 ? S 14:38 0:00 /var/packages/MailPlus-Server/target/bin/syno_anti-virus update
root 19330 1.4 5.5 319640 51424 ? D 14:38 0:09 freshclam
root 19391 0.0 0.1 269376 1044 ? S 14:38 0:00 /var/packages/MailPlus-Server/target/bin/syno_anti-virus start
root 19486 0.0 0.0 561268 488 ? Ss 14:39 0:00 synoscgi --m
root 19598 1.2 1.2 338076 11628 ? D 14:39 0:07 clamd
root 20008 0.0 0.0 0 0 ? S< 14:40 0:00 [kworker/u9:2]
http 20196 0.3 1.2 345972 11180 ? D 14:40 0:01 php-fpm: pool www
http 20210 0.3 1.1 346508 10692 ? D 14:41 0:01 php-fpm: pool www
http 20436 0.4 1.1 345972 11048 ? D 14:41 0:02 php-fpm: pool www
root 20493 0.0 0.0 10668 308 ? Ss 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam
root 20495 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam
root 20496 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam
root 20497 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam
root 20498 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam
root 21174 0.0 0.1 285476 968 ? S< 14:42 0:00 /var/packages/MailPlus-Server/target/bin/syno_action antivirus anti_virus_quarantin
root 21177 0.0 0.1 12280 1148 ? Ss 14:42 0:00 /bin/sh /var/packages/MailPlus-Server/target/scripts/daemon/clamav.sh update_local_
root 21182 0.0 0.4 269376 3824 ? S 14:42 0:00 /var/packages/MailPlus-Server/target/bin/syno_anti-virus update
root 21193 1.6 2.5 319640 23272 ? D 14:42 0:07 freshclam
root 21252 0.0 0.0 0 0 ? S 14:43 0:00 [kworker/0:0]
MailPlu+ 21253 0.0 0.0 271432 708 ? Ss 14:43 0:00 /var/packages/MailPlus-Server/target/sbin/syno_mailserver_notifierd
http 21341 0.3 1.1 346508 10644 ? D 14:43 0:01 php-fpm: pool www
root 21440 0.0 0.0 0 0 ? S 14:43 0:00 [kworker/1:1]
root 21842 0.0 0.2 93432 2492 ? Ss 14:44 0:00 /var/packages/MailPlus-Server/target/libexec/master -w
MailPlu+ 21852 0.0 0.3 271732 3152 ? Ds 14:44 0:00 /var/packages/MailPlus-Server/target/sbin/syno_mailloggerd -p 5
http 21856 0.3 1.2 345972 11324 ? D 14:44 0:01 php-fpm: pool www
postfix 21879 0.0 0.3 93512 3088 ? S 14:44 0:00 pickup -l -t fifo -u
postfix 21881 0.0 0.3 93696 3104 ? S 14:44 0:00 qmgr -l -t fifo -u
root 21985 0.5 0.7 323416 7224 ? Ss 14:44 0:01 synoscgi_SYNO.Core.Package.Server_1_check
root 22018 0.0 0.0 0 0 ? Zs 14:44 0:00 [SYNO.Core.UserS] <defunct>
http 22250 0.2 0.7 342276 7188 ? D 14:45 0:00 php-fpm: pool www
root 22312 0.0 0.0 32904 816 ? S<sl 14:45 0:00 /var/packages/MailPlus-Server/target/usr/bin/redis-server *:8505
system 22545 0.0 0.0 242076 360 ? S 14:45 0:00 synoscgi
root 22719 0.7 0.3 1088780 3096 pts/14 Ssl+ 14:46 0:01 npm
http 22865 0.0 0.2 44584 2304 ? S< 14:46 0:00 nginx: worker process is shutting down
postgres 22934 0.0 0.2 159584 2668 ? Ss 14:46 0:00 postgres: postgres calendar [local] idle
root 23069 0.4 0.3 918148 3084 pts/14 Sl+ 14:46 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node push_server.js
postgres 23127 0.0 0.1 255880 1816 ? Ss 14:46 0:00 ./reminderd
MailPlu+ 23336 0.0 0.1 39440 1124 ? Ssl 14:47 0:00 /var/packages/MailPlus-Server/target/sbin/opendkim -x /var/packages/MailPlus-Server
http 23353 0.1 1.1 340644 10320 ? D 14:47 0:00 php-fpm: pool www
root 23354 0.0 0.2 836240 1940 ? D<s 14:47 0:00 rspamd: main process
MailPlu+ 23357 0.4 0.7 908432 7132 ? S< 14:47 0:00 rspamd: rspamd_proxy process
MailPlu+ 23358 0.4 0.5 911260 4852 ? D< 14:47 0:00 rspamd: controller process
MailPlu+ 23359 0.4 0.4 935056 4452 ? S< 14:47 0:00 rspamd: normal process
MailPlu+ 23360 0.4 0.4 937104 4624 ? S< 14:47 0:00 rspamd: normal process
MailPlu+ 23361 0.3 0.2 860816 2488 ? S< 14:47 0:00 rspamd: hs_helper process
MailPlu+ 23613 1.1 4.1 132280 38460 ? S< 14:48 0:01 /var/packages/MailPlus-Server/target/bin/mimedefang-multiplexor -U MailPlus-Server
MailPlu+ 23615 0.0 0.0 16724 376 ? S<l 14:48 0:00 /var/packages/MailPlus-Server/target/bin/mimedefang -U MailPlus-Server -z /var/run/
root 23629 0.0 0.0 0 0 ? S 14:48 0:00 [kworker/0:3]
MailPlu+ 23635 0.0 4.0 132280 37472 ? S< 14:48 0:00 /var/packages/MailPlus-Server/target/bin/mimedefang-multiplexor -U MailPlus-Server
root 23650 0.4 1.0 319020 9808 ? Ss 14:48 0:00 /usr/bin/nmbd -F
root 23812 0.0 0.1 25116 1540 ? S 14:48 0:00 avahi-daemon: running [Dracstation.local]
MailPlu+ 23954 0.0 0.2 39576 1980 ? S<sl 14:48 0:00 /var/packages/MailPlus-Server/target/sbin/opendkim -x /var/packages/MailPlus-Server
MailPlu+ 24007 0.0 0.0 33636 668 ? S<sl 14:48 0:00 /var/packages/MailPlus-Server/target/sbin/opendmarc
root 24059 0.0 0.2 12484 2332 ? S< 14:49 0:00 /bin/sh /var/packages/MailPlus-Server/target/scripts/daemon/dovecot.sh restart
MailPlu+ 24141 0.0 0.5 282168 4788 ? Ss 14:49 0:00 /var/packages/MailPlus-Server/target/sbin/syno_mailserverd
http 24188 0.0 0.2 44648 2324 ? S< 14:49 0:00 nginx: worker process
http 24189 0.0 0.2 44648 2552 ? S< 14:49 0:00 nginx: worker process
root 24359 0.0 0.2 69316 1968 ? S<s 14:49 0:00 /var/packages/MailPlus-Server/target/sbin/dovecot
root 24371 0.0 0.3 67156 3636 ? S< 14:49 0:00 dovecot/anvil
root 24372 0.0 0.4 67288 3856 ? S< 14:49 0:00 dovecot/log
root 24374 0.0 0.6 88616 5944 ? S< 14:49 0:00 dovecot/config
root 24428 0.2 1.1 137276 10576 ? S 14:49 0:00 /usr/bin/php -dopen_basedir=/ /usr/syno/bin/codesign.php --addserver /tmp/keyringWD
root 24434 0.0 0.1 11732 1424 ? S 14:49 0:00 sh -c synowebapi --exec api=SYNO.Core.Storage.Volume method=list version=1 limit=-1
root 24435 0.5 0.9 298000 8692 ? Ds 14:49 0:00 synowebapi --exec api=SYNO.Core.Storage.Volume method=list version=1 limit -1 offse
root 24455 0.0 0.1 136180 1036 ? D 14:49 0:00 /var/packages/MailPlus-Server/target/bin/syno_action setSpamRuleUpdateTask 0
root 24469 0.5 0.1 172200 1312 ? D< 14:49 0:00 /var/packages/MailPlus-Server/target/bin/syno_mailserver_backend --getConfKeyVal po
Olivier 24470 6.0 0.1 27740 1484 pts/3 R+ 14:49 0:00 ps aux

merci par avance

Connexion

Problème Synology inaccessible, accès disque permanent

Messages recommandés

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Lien vers le commentaire

Partager sur d’autres sites

Rejoindre la conversation

Qui est en ligne 5 membres, 0 anonyme, 633 invités (Afficher la liste complète)

Contributeurs populaires

Information importante