Minada Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Bonjour à tous, J'espère être dans la bonne section. Je possède un Synology DS411j actuellement sous DSM 6.1 il me semble (difficile de le vérifier ..). Il y a une semaine, j'ai effectué la copie d'un grand nombre de photos sur mon Synology et depuis, plus moyen d'y accéder. Les LEDs accès disque dur sont en permanence clignotantes, et l'interface du DSM est généralement inaccessible (quand j'arrive à y accéder par miracle, tout est extrêmement lent et se termine généralement par une durée trop longue d'attente ...). J'ai tenté plusieurs redémarrages, il met plusieurs dizaines de minutes avant de prendre en compte la commande d'arrêt ... J'arrive à me connecter en ssh mais partant de là je ne vois pas trop quoi faire. J'ai cherché un peu d'informations sur le net mais aucune des solutions que j'ai pu voir n'ont été effectives. Auriez-vous une idée ? 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Ton problème est un peu sans surprise, l'indexation et la génération des miniatures met à genoux ton nas... Tu as transferts qu'elle quantité pour avoir une idée ? 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Un peu plus de 1600 photos (dont 1 ou 2 vidéos ...) pour environ 6 Go. J'ai pensé à ce problème d'indexation et j'ai donc déplacé tous les dossiers incriminés hors du dossier /photo, mais le problème persiste ... 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 En ssh fait un top pour voir ce qui consomme 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Voilà le résultat d'un top : Tasks: 211 total, 1 running, 210 sleeping, 0 stopped, 0 zombie %Cpu(s): 7.2 us, 26.1 sy, 0.0 ni, 0.0 id, 64.4 wa, 1.7 hi, 0.6 si, 0.0 st GiB Mem : 0.113 total, 0.008 free, 0.059 used, 0.046 buff/cache GiB Swap: 2.000 total, 1.898 free, 0.102 used. 0.011 avail Mem PID USER PR NI VIRT RES %CPU %MEM TIME+ S COMMAND 7876 admin 20 0 5.3m 1.2m 4.6 1.1 0:00.62 R top 7215 root 20 0 32.4m 1.6m 3.6 1.3 0:02.68 D /var/packages/PHP5.6/target/usr/local/bin/php56-fpm -c /var/packages/PHP5.6/target/usr/local/etc/php56/php.i+ 7024 root 20 0 30.8m 2.1m 3.1 1.8 0:02.74 D /var/packages/HyperBackup/target/bin/dsmbackup --clean-backup-snapshot 7936 root 20 0 9.7m 2.4m 3.1 2.0 0:00.08 D /usr/syno/sbin/synoservice --is-enable sftp 6876 root 20 0 39.0m 0.9m 2.6 0.8 0:04.30 D /var/packages/SynoFinder/target/sbin/synoelasticd 6984 root 20 0 92.4m 1.8m 1.5 1.6 0:02.66 D /usr/syno/bin/scemd 99 root 20 0 0.0m 0.0m 1.0 0.0 0:05.58 S [kblockd/0] 129 root 20 0 0.0m 0.0m 1.0 0.0 0:02.31 D [kswapd0] 4771 root 20 0 13.3m 1.1m 1.0 1.0 0:00.80 S /usr/syno/sbin/synostoraged 7048 root 20 0 37.2m 1.6m 1.0 1.3 0:02.84 D /var/packages/HyperBackupVault/target/bin/synoimgbkptool -G 7178 root 20 0 44.8m 1.0m 1.0 0.9 0:01.15 D /var/packages/iTunesServer/target/sbin/mt-daapd 7702 postgres 20 0 51.1m 2.4m 1.0 2.1 0:01.30 S postgres: postgres mediaserver [local] idle 7893 root 20 0 25.4m 1.4m 1.0 1.2 0:00.13 D /var/packages/AudioStation/target/sbin/synoaudiod 355 root 20 0 0.0m 0.0m 0.5 0.0 0:00.77 S [md0_raid1] 7099 root 20 0 31.2m 1.7m 0.5 1.5 0:01.63 D /var/packages/MediaServer/target/sbin/dms 7256 sabnzbd 20 0 16.8m 4.7m 0.5 4.1 0:08.30 D /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/conf+ 7346 root 20 0 35.4m 1.6m 0.5 1.4 0:01.56 D /usr/bin/nmbd -F 7919 root 20 0 19.5m 0.9m 0.5 0.8 0:00.07 D /var/packages/SynoFinder/target/tool/appindex -a add -p /var/packages/MailServer/target/app/index.conf 1 root 20 0 4.0m 0.9m 0.0 0.8 0:30.35 S /sbin/init 2 root 20 0 0.0m 0.0m 0.0 0.0 0:00.01 S [kthreadd] 3 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [ksoftirqd/0] 4 root 20 0 0.0m 0.0m 0.0 0.0 0:00.01 S [events/0] 5 root 20 0 0.0m 0.0m 0.0 0.0 0:00.01 S [khelper] 8 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [async/mgr] 95 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [sync_supers] 97 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [bdi-default] 105 root 20 0 0.0m 0.0m 0.0 0.0 0:00.12 S [ata/0] 106 root 20 0 0.0m 0.0m 0.0 0.0 0:00.06 S [ata_aux] 121 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [rpciod/0] 130 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [aio/0] 131 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [nfsiod] 132 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [crypto/0] 256 root 20 0 0.0m 0.0m 0.0 0.0 0:00.01 S [scsi_eh_0] 259 root 20 0 0.0m 0.0m 0.0 0.0 0:00.02 S [scsi_eh_1] 262 root 20 0 0.0m 0.0m 0.0 0.0 0:00.02 S [scsi_eh_2] 265 root 20 0 0.0m 0.0m 0.0 0.0 0:00.01 S [scsi_eh_3] 312 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [scsi_eh_4] 315 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [scsi_eh_5] 320 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [mtdblockd] 344 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [kstriped] 361 root 20 0 0.0m 0.0m 0.0 0.0 0:00.33 S [md1_raid1] 458 root 20 0 0.0m 0.0m 0.0 0.0 0:00.02 S [khubd] 464 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [kethubd] 672 root 20 0 0.0m 0.0m 0.0 0.0 0:00.04 S [flush-9:0] 735 root 20 0 0.0m 0.0m 0.0 0.0 0:00.03 S [kjournald] 821 system 20 0 31.1m 1.3m 0.0 1.2 0:02.11 S /usr/bin/syslog-ng -F --worker-threads=1 -u system -g log 1253 root 20 0 11.4m 0.6m 0.0 0.5 0:00.21 D /usr/syno/sbin/synologaccd -f 1308 root 20 0 2.6m 0.3m 0.0 0.3 0:00.18 S /sbin/dbus-daemon --session --fork --print-address 1328 root 20 0 2.6m 0.3m 0.0 0.2 0:00.27 S /sbin/dbus-daemon --system --nopidfile 1406 root 20 0 34.4m 0.5m 0.0 0.4 0:00.14 S /usr/syno/sbin/synoconfd -D 1422 root 20 0 3.1m 0.4m 0.0 0.4 0:00.38 S udevd --daemon 1485 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [ksnapd] 1806 root 20 0 38.3m 0.4m 0.0 0.3 0:00.33 S /usr/syno/sbin/synonetd 1879 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [crypto] Je ne vois rien de particulièrement alarmant là-dedans ... 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Effectivement ou alors tu n'as pas capturé au bon moment. Après le problème vient peu être d'ailleurs, tu as essayé via d'autre poste ou navigateur ? 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Voici un autre top (le premier était fait 2 minutes après un démarrage) : Tasks: 191 total, 2 running, 189 sleeping, 0 stopped, 0 zombie %Cpu(s): 9.9 us, 16.3 sy, 0.0 ni, 0.0 id, 69.9 wa, 1.4 hi, 2.5 si, 0.0 st GiB Mem : 0.113 total, 0.008 free, 0.056 used, 0.049 buff/cache GiB Swap: 2.000 total, 1.830 free, 0.169 used. 0.014 avail Mem PID USER PR NI VIRT RES %CPU %MEM TIME+ S COMMAND 9702 root 20 0 16.8m 2.9m 1.9 2.5 0:00.12 D /var/packages/MailServer/target/libexec/dovecot/managesieve -k -c /var/packages/MailServer/target/etc/doveco+ 99 root 20 0 0.0m 0.0m 1.4 0.0 0:38.63 S [kblockd/0] 9663 admin 20 0 5.3m 1.1m 0.9 0.9 0:01.31 R top 9666 root 20 0 11.4m 0.5m 0.9 0.5 0:00.80 D /var/packages/MailServer/target/libexec/dovecot/managesieve -k -c /var/packages/MailServer/target/etc/doveco+ 6876 root 20 0 39.0m 1.6m 0.8 1.4 0:28.21 D /var/packages/SynoFinder/target/sbin/synoelasticd 8956 couchpo+ 20 0 44.1m 3.0m 0.6 2.6 0:17.00 D /usr/local/couchpotatoserver/env/bin/python /usr/local/couchpotatoserver/share/CouchPotatoServer/CouchPotato+ 9606 root 20 0 40.8m 1.7m 0.6 1.5 0:01.68 D /var/packages/SurveillanceStation/target/sbin/sscored 8844 sabnzbd 20 0 234.2m 6.3m 0.5 5.4 0:24.45 S /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/conf+ 9645 root 20 0 16.9m 4.0m 0.5 3.5 0:01.42 R /var/packages/MailServer/target/libexec/dovecot/managesieve -k -c /var/packages/MailServer/target/etc/doveco+ 4771 root 20 0 13.3m 1.0m 0.3 0.8 0:04.86 S /usr/syno/sbin/synostoraged 8100 root 20 0 37.2m 1.6m 0.3 1.3 0:12.32 D /var/packages/HyperBackup/target/bin/synoimgbkptool -e 8104 root 20 0 37.2m 1.6m 0.3 1.3 0:12.22 D /var/packages/HyperBackup/target/bin/synoimgbkptool -G -y local 8634 sickbea+ 20 0 193.5m 4.4m 0.3 3.8 0:11.24 S /usr/local/sickbeard/env/bin/python /usr/local/sickbeard/share/SickBeard/SickBeard.py --daemon --pidfile /us+ 355 root 20 0 0.0m 0.0m 0.2 0.0 0:02.65 S [md0_raid1] 821 system 20 0 39.2m 0.8m 0.2 0.7 0:06.05 S /usr/bin/syslog-ng -F --worker-threads=1 -u system -g log 1806 root 20 0 38.3m 0.2m 0.2 0.2 0:00.51 S /usr/syno/sbin/synonetd 5528 root 20 0 30.4m 0.8m 0.2 0.7 0:06.98 S /usr/bin/snmpd -fLn -c /etc/snmp/snmpd.conf -p /var/run/snmpd.pid 127.0.0.1:161 6337 root 20 0 46.5m 0.5m 0.2 0.4 0:04.54 S /usr/bin/smbd -F 6367 postgres 20 0 50.0m 0.2m 0.2 0.2 0:01.06 D postgres: writer process 6984 root 20 0 92.4m 0.7m 0.2 0.6 0:16.69 S /usr/syno/bin/scemd 8032 AudioSt+ 15 -5 80.7m 0.8m 0.2 0.7 0:09.51 S /var/packages/AudioStation/target/sbin/synoaudiod 8103 root 20 0 37.2m 1.6m 0.2 1.3 0:12.02 D /var/packages/HyperBackup/target/bin/synoimgbkptool -U 8802 root 20 0 37.2m 1.6m 0.2 1.4 0:08.87 D /var/packages/HyperBackupVault/target/bin/synoimgbkptool -L 9020 root 20 0 30.8m 1.3m 0.2 1.1 0:06.46 D /var/packages/DownloadStation/target/sbin/scheduler 9650 root 20 0 35.4m 1.7m 0.2 1.5 0:00.65 D /usr/bin/nmbd -F 9682 root 20 0 3.1m 1.0m 0.2 0.8 0:00.07 D /bin/sh /usr/syno/etc/rc.sysv/avahi.sh avahi-delete-conf Je ne sais pas si on peut y voir quelque chose de louche, entre le MailServer, kblockd/0 et synoelasticd ... Je n'ai pas assez de connaissance pour déterminer ce qui est normal et ce qui ne l'est pas. En tout cas mes disques sont toujours en occupation 100%. Pas de rapport avec le navigateur a priori, et l'accès ne fonctionne pas non plus via le partage réseau. J'ai un Raspberry Pi avec Kodi installé dessus qui utilise le NAS comme source en SMB, lui n'arrive pas non plus à le contacter ... 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Rien ne fait cavalé le proco, on va voir pour les disques durs alors, fait un : smartctl -a /dev/sdX pour chacun de tes disques et colle le résultat. pour les lettres fait un : cat /proc/mdstat et poste aussi le résultat de ce résultat. Tu as certainement un disque défaillant. 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Alors, voilà d'abord le résulta du cat /proc/mdstat : Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active raid5 sdb5[0] sda5[4] sdd5[3] sdc5[1] 5846342016 blocks super 1.1 level 5, 64k chunk, algorithm 2 [4/4] [UUUU] md1 : active raid1 sda2[3] sdb2[0] sdc2[1] sdd2[2] 2097088 blocks [4/4] [UUUU] md0 : active raid1 sda1[3] sdb1[0] sdc1[1] sdd1[2] 2490176 blocks [4/4] [UUUU] unused devices: <none> Du coup j'ai recherché les infos pour les disques sda, sdb, sdc, sdd : sda : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: WDC Product: WD30EFRX-68AX9N0 Revision: 80.0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Logical block size: 512 bytes Physical block size: 4096 bytes Serial number: WD-WMC1T1031292 Device type: disk Local Time is: Sun Apr 30 15:10:30 2017 CEST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] Device does not support Self Test logging sdb : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SAMSUNG Product: HD204UI Revision: 1AQ1 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Rotation Rate: 5400 rpm Form Factor: 3.5 inches Serial number: S2H7JD1B110429 Device type: disk Local Time is: Sun Apr 30 15:11:22 2017 CEST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] Device does not support Self Test logging sdc : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SAMSUNG Product: HD204UI Revision: 1AQ1 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Rotation Rate: 5400 rpm Form Factor: 3.5 inches Serial number: S2H7JD1B110425 Device type: disk Local Time is: Sun Apr 30 15:11:54 2017 CEST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] Device does not support Self Test logging sdd : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SAMSUNG Product: HD204UI Revision: 1AQ1 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Rotation Rate: 5400 rpm Form Factor: 3.5 inches Serial number: S2H7JD1B110431 Device type: disk Local Time is: Sun Apr 30 15:12:15 2017 CEST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] Device does not support Self Test logging Apparemment aucun d'entre eux n'est compatible SMART ... Ce qui est étrange, dans l'interface web j'ai déjà vu par le passé (quand je pouvais encore y accéder) le statut des disques. 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Rajoute un "-d sat" dans la commande smart 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Effectivement on a un peu plus d'infos du coup. SDA : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WMC1T1031292 LU WWN Device Id: 5 0014ee 65840bf48 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Apr 30 15:43:29 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (40020) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 401) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 183 177 021 Pre-fail Always - 5816 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 383 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 054 054 000 Old_age Always - 33687 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 383 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 371 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 45 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SDB : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: S2H7JD1B110429 LU WWN Device Id: 5 0024e9 00496670e Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 30 15:44:29 2017 CEST ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19620) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 327) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 3 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 066 065 025 Pre-fail Always - 10308 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1048 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 44602 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1039 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 19386572 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 104 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 055 049 000 Old_age Always - 45 (Min/Max 11/51) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 1 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1050 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SDC : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: S2H7JD1B110425 LU WWN Device Id: 5 0024e9 004966700 Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 30 15:46:06 2017 CEST ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20460) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 341) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 280 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 067 066 025 Pre-fail Always - 10168 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1049 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 44597 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1041 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 19386712 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 212 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 055 049 000 Old_age Always - 45 (Min/Max 11/51) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 2 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1052 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SDD : smartctl 6.5 (build date Jan 12 2017) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: S2H7JD1B110431 LU WWN Device Id: 5 0024e9 00496671a Firmware Version: 1AQ10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 30 15:46:51 2017 CEST ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20760) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 346) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 5 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 067 065 025 Pre-fail Always - 10202 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1049 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 44593 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1039 181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 19386784 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 92 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 058 051 000 Old_age Always - 42 (Min/Max 11/49) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 4 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1051 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Ce n'est pas très parlant pour moi mais j'ai l'impression qu'il n'y a pas de problème sur les disques ... 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Tu as toute les valeurs en instantané ou un disque a pédalé un peu ? Les valeurs sont dans les normes, même si certaine incite au backup. Je voulais voir si tu avais les attributs de timeout mais non... Car bon tel que tu le décris c'est un peu le symptôme (j'ai déjà eu, volume occupé, interface très lente et un nas qui fessait la guirlande sur le réseau) Lorsqu'il reboot ton nas, comme d'habitude ou plutôt long le démarrage ? 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Je ne saurais pas te dire si un disque a pédalé un peu, vu que même le ssh n'est pas très rapide, les commandes ne s'exécutent pas immédiatement en général et souvent je vois les caractères s'afficher bien après les avoir tapés (ça ne faisait pas ça non plus avant). Le démarrage est un peu plus long que d'habitude, une fois démarré de ça clignote en permanence. J'ai aussi testé de le démarrer avec le câble réseau débranché, même chose. Par contre c'est vraiment l'arrêt qui est long, au moins 15 minutes avant que le bouton on/off commence à clignoter ... 0 Citer
Fenrir Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Le ssh devrait être instantané 2 commandes de plus : uptime (pour avoir le load qui n'est pas dans ton top) ps aux (pour voir tous les process) 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Ouai voilà j'allais le dire, le ssh doit resté fluide... 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 uptime me donne ça : 16:25:18 up 2:32, 1 user, load average: 4.28, 4.56, 4.73 16:25:18 up 2:32, 1 user, load average: 4.28, 4.56, 4.73 Et ps aux donne ça : root 1 0.3 0.1 4068 176 ? Ss 13:52 0:36 /sbin/init root 2 0.0 0.0 0 0 ? S 13:52 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S 13:52 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S 13:52 0:00 [events/0] root 5 0.0 0.0 0 0 ? S 13:52 0:00 [khelper] root 8 0.0 0.0 0 0 ? S 13:52 0:00 [async/mgr] root 95 0.0 0.0 0 0 ? S 13:52 0:00 [sync_supers] root 97 0.0 0.0 0 0 ? S 13:52 0:00 [bdi-default] root 99 1.2 0.0 0 0 ? S 13:52 1:58 [kblockd/0] root 105 0.0 0.0 0 0 ? S 13:52 0:01 [ata/0] root 106 0.0 0.0 0 0 ? S 13:52 0:00 [ata_aux] root 121 0.0 0.0 0 0 ? S 13:52 0:00 [rpciod/0] root 129 0.3 0.0 0 0 ? D< 13:52 0:32 [kswapd0] root 130 0.0 0.0 0 0 ? S 13:52 0:00 [aio/0] root 131 0.0 0.0 0 0 ? S 13:52 0:00 [nfsiod] root 132 0.0 0.0 0 0 ? S 13:52 0:00 [crypto/0] root 256 0.0 0.0 0 0 ? S 13:52 0:00 [scsi_eh_0] root 259 0.0 0.0 0 0 ? S 13:52 0:00 [scsi_eh_1] root 262 0.0 0.0 0 0 ? S 13:52 0:00 [scsi_eh_2] root 265 0.0 0.0 0 0 ? S 13:52 0:00 [scsi_eh_3] root 312 0.0 0.0 0 0 ? S 13:53 0:00 [scsi_eh_4] root 315 0.0 0.0 0 0 ? S 13:53 0:00 [scsi_eh_5] root 320 0.0 0.0 0 0 ? S 13:53 0:00 [mtdblockd] root 344 0.0 0.0 0 0 ? S 13:53 0:00 [kstriped] root 355 0.0 0.0 0 0 ? S 13:53 0:07 [md0_raid1] root 361 0.0 0.0 0 0 ? S 13:53 0:07 [md1_raid1] root 458 0.0 0.0 0 0 ? S 13:53 0:00 [khubd] root 464 0.0 0.0 0 0 ? S 13:53 0:00 [kethubd] root 735 0.0 0.0 0 0 ? S 13:53 0:00 [kjournald] system 821 0.1 1.2 40168 1492 ? Ssl 13:53 0:14 /usr/bin/syslog-ng -F --worker-threads=1 -u system -g log root 1253 0.0 0.1 11688 212 ? Ss 13:53 0:01 /usr/syno/sbin/synologaccd -f root 1308 0.0 0.0 2624 92 ? Ss 13:53 0:00 /sbin/dbus-daemon --session --fork --print-address root 1328 0.0 0.0 2624 100 ? Ss 13:53 0:00 /sbin/dbus-daemon --system --nopidfile root 1406 0.0 0.0 35192 96 ? Ssl 13:53 0:00 /usr/syno/sbin/synoconfd -D root 1422 0.0 0.0 3212 84 ? Ss 13:53 0:00 udevd --daemon root 1485 0.0 0.0 0 0 ? S 13:53 0:00 [ksnapd] root 1806 0.0 0.1 39256 124 ? Ssl 13:53 0:00 /usr/syno/sbin/synonetd root 1879 0.0 0.0 0 0 ? S 13:53 0:00 [crypto] root 1880 0.0 0.0 0 0 ? S 13:53 0:00 [crypto_ret] root 2109 0.0 0.0 0 0 ? S 13:53 0:00 [ecryptfs-kthrea] root 2935 0.0 0.2 10956 284 ? SNs 13:54 0:00 /usr/syno/bin/synologrotated root 3987 0.0 0.0 3800 72 ? Ss 13:54 0:00 /usr/sbin/dhclient -4 -d -q -lf /tmp/dhcpv4.leases.eth0 -pf /tmp/dhcpcd-eth0.pid -sf /tmp/dhclient-script eth0 root 4044 0.9 0.0 0 0 ? S 13:54 1:30 [md2_raid5] root 4142 0.0 0.0 0 0 ? S 13:54 0:00 [kdmflush] root 4618 0.0 0.0 0 0 ? S 13:54 0:01 [jbd2/dm-0-8] root 4621 0.0 0.0 0 0 ? S 13:54 0:00 [ext4-dio-unwrit] root 4744 0.0 0.4 12804 476 ? Ss 13:54 0:01 /usr/syno/sbin/synocrond root 4769 0.0 0.0 13668 108 ? Ss 13:54 0:00 synostoraged root 4770 0.0 0.2 13668 332 ? S 13:54 0:01 /usr/syno/sbin/synostoraged root 4771 0.1 0.8 13668 996 ? S 13:54 0:15 /usr/syno/sbin/synostoraged root 4802 0.2 0.0 0 0 ? S 13:54 0:26 [flush-253:0] root 5045 0.0 0.0 0 0 ? S 13:54 0:00 [usbhid_resumer] root 5059 0.0 1.1 3120 1388 ? SLs 13:54 0:00 /usr/bin/vmtouch -lfd /var/run root 5064 0.0 0.0 2192 72 ttyS0 Ss+ 13:54 0:00 /sbin/getty 115200 console root 5211 0.0 0.1 14392 228 ? Ss 13:54 0:01 /usr/syno/bin/synobackupd root 5230 0.0 0.2 13960 324 ? Ss 13:54 0:00 /usr/syno/sbin/hotplugd root 5528 0.2 0.6 31164 804 ? Ss 13:54 0:21 /usr/bin/snmpd -fLn -c /etc/snmp/snmpd.conf -p /var/run/snmpd.pid 127.0.0.1:161 root 5579 0.0 0.1 28424 124 ? S<s 13:54 0:00 synoscgi root 5644 0.0 0.0 24688 76 ? S<s 13:54 0:00 /usr/syno/sbin/synocgid -D root 5681 0.0 0.1 20148 196 ? Ss 13:54 0:00 /usr/syno/sbin/synosnmpcd ntp 5723 0.0 0.3 15680 404 ? Ssl 13:54 0:02 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u ntp:ntp root 5724 0.0 0.0 19704 116 ? Ss 13:54 0:00 /usr/syno/bin/s2s_daemon -d root 5750 0.0 0.1 39360 160 ? S 13:54 0:00 /usr/bin/netatalk root 5760 0.0 0.0 1948 60 ? S 13:54 0:00 /usr/bin/inetd root 5792 0.0 0.0 23476 108 ? S<s 13:54 0:00 /usr/syno/bin/findhostd root 5907 0.0 0.0 13904 76 ? Ss 13:55 0:00 /usr/bin/sshd root 5941 0.0 0.0 65984 96 ? S 13:55 0:01 /usr/bin/afpd -d -F /etc/afp.conf root 5942 0.0 0.0 13500 92 ? S 13:55 0:00 /usr/bin/cnid_metad -d -F /etc/afp.conf system 5955 0.0 0.0 28424 24 ? S 13:55 0:00 synoscgi system 5956 0.0 0.0 28424 24 ? S 13:55 0:00 synoscgi system 5957 0.0 0.0 28424 24 ? S 13:55 0:00 synoscgi system 5958 0.0 0.0 28424 24 ? S 13:55 0:00 synoscgi system 5959 0.0 0.0 28424 24 ? S 13:55 0:00 synoscgi root 5964 0.0 0.0 0 0 ? S< 13:55 0:00 [kslowd000] root 5971 0.0 0.0 0 0 ? S< 13:55 0:00 [kslowd001] root 6047 0.0 0.0 23436 76 ? Ss 13:55 0:00 /usr/bin/ftpd -DPS root 6170 0.0 0.1 1788 132 ? Ss 13:55 0:00 /usr/bin/minissdpd -i eth0 postgres 6278 0.0 0.1 51236 148 ? Ss 13:55 0:02 /usr/bin/postgres -D /var/services/pgsql root 6337 0.0 0.2 47656 260 ? Ss 13:55 0:05 /usr/bin/smbd -F postgres 6366 0.0 0.1 51236 172 ? Ss 13:55 0:00 postgres: checkpointer process postgres 6367 0.0 0.1 51236 188 ? Ss 13:55 0:03 postgres: writer process postgres 6368 0.0 0.1 51236 152 ? Ss 13:55 0:05 postgres: wal writer process root 6434 0.0 0.0 0 0 ? S< 13:55 0:00 [LIO_rd_dr] root 6436 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-0] root 6437 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-1] root 6438 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-2] root 6439 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-3] root 6440 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-4] root 6441 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-5] root 6442 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-6] root 6443 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-7] root 6444 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-8] root 6445 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-9] root 6446 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-10] root 6447 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-11] root 6448 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-12] root 6449 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-13] root 6450 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-14] root 6451 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-15] root 6452 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-16] root 6453 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-17] root 6454 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-18] root 6455 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-19] root 6456 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-20] root 6457 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-21] root 6458 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-22] root 6459 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-23] root 6460 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-24] root 6461 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-25] root 6462 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-26] root 6463 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-27] root 6464 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-28] root 6465 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-29] root 6466 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-30] root 6467 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-0-31] root 6468 0.0 0.0 0 0 ? S 13:55 0:00 [LUN-1-0] root 6470 0.0 0.0 0 0 ? S 13:55 0:00 [iscsi_trx/1] root 6471 0.0 0.0 0 0 ? S< 13:55 0:00 [iscsi_ttx/1] root 6472 0.0 0.0 0 0 ? S 13:55 0:00 [iscsi_trx/2] root 6473 0.0 0.0 0 0 ? S< 13:55 0:00 [iscsi_ttx/2] root 6474 0.0 0.0 0 0 ? S 13:55 0:00 [iscsi_trx/3] root 6475 0.0 0.0 0 0 ? S< 13:55 0:00 [iscsi_ttx/3] root 6476 0.0 0.0 0 0 ? S 13:55 0:00 [iscsi_trx/4] root 6477 0.0 0.0 0 0 ? S< 13:55 0:00 [iscsi_ttx/4] root 6585 0.0 0.0 10032 108 ? S<s 13:55 0:00 nginx: master process /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_process on; root 6588 0.0 0.0 47532 72 ? S 13:55 0:00 /usr/bin/smbd -F root 6589 0.0 0.0 47524 60 ? S 13:55 0:00 /usr/bin/smbd -F root 6894 0.0 0.1 2880 232 ? Ss 13:56 0:00 /usr/sbin/crond root 6984 0.7 1.7 102812 2048 ? Ssl 13:56 1:09 /usr/syno/bin/scemd root 7042 0.1 0.1 38236 132 ? Ss 13:56 0:09 /var/packages/HyperBackupVault/target/bin/img_backupd root 7178 0.0 0.1 55140 140 ? Sl 13:56 0:01 /var/packages/iTunesServer/target/sbin/mt-daapd root 7200 0.1 0.6 47480 740 ? DLl 13:56 0:12 /usr/syno/sbin/synorelayd postgres 7202 0.0 0.0 52400 64 ? Ss 13:56 0:03 postgres: postgres mediaserver [local] idle root 7215 0.0 0.1 138920 172 ? Ss 13:56 0:08 php-fpm: master process (/var/packages/PHP5.6/target/usr/local/etc/php56/php-fpm.conf) root 7313 0.0 0.0 24224 104 ? Ss 13:56 0:01 sshd: admin [priv] postgres 7702 0.0 0.0 52316 64 ? Ss 13:58 0:01 postgres: postgres mediaserver [local] idle root 7744 0.0 0.4 24224 560 ? S 13:59 0:02 sshd: admin@pts/2 admin 7755 0.0 0.0 5424 116 pts/2 Ss 13:59 0:00 -sh AudioSt+ 8032 0.4 0.6 82624 804 ? R<sl 14:00 0:36 /var/packages/AudioStation/target/sbin/synoaudiod root 8084 0.0 0.0 81964 108 ? S<l 14:01 0:01 /var/packages/AudioStation/target/bin/pulseaudio --realtime=false AudioSt+ 8252 0.0 0.0 7840 112 ? S<s 14:02 0:00 /var/packages/AudioStation/target/sbin/synorcd root 8528 0.0 0.3 116148 460 ? Ssl 14:06 0:02 /var/packages/MediaServer/target/sbin/dms MediaSe+ 8575 0.0 0.1 28576 160 ? S 14:06 0:00 /var/packages/MediaServer/target/sbin/lighttpd -f /var/packages/MediaServer/target/etc/lighttpd.debug -m /var/packages/MediaServer/target/lib/lighttpd sickbea+ 8634 2.0 1.6 199928 1984 ? Sl 14:07 2:47 /usr/local/sickbeard/env/bin/python /usr/local/sickbeard/share/SickBeard/SickBeard.py --daemon --pidfile /usr/local/sickbeard/var/sickbeard.pid --config /usr/local/sic sabnzbd 8844 18.8 21.9 267456 25972 ? Sl 14:10 25:28 /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/config.ini --pidfile /usr/local/sabnzbd/var/sabnzbd.pid -d couchpo+ 8956 0.5 2.9 91992 3512 ? Sl 14:12 0:44 /usr/local/couchpotatoserver/env/bin/python /usr/local/couchpotatoserver/share/CouchPotatoServer/CouchPotato.py --daemon --pid_file /usr/local/couchpotatoserver/var/co root 9110 0.0 0.1 15680 172 ? Ss 14:15 0:01 /var/packages/MailServer/target/sbin/dovecot root 9116 0.0 0.1 15500 204 ? S 14:15 0:01 dovecot/log root 9172 0.0 0.1 23436 156 ? Ss 14:16 0:00 /var/packages/MailServer/target/sbin/syno_mailserverd root 9650 0.3 0.3 36676 456 ? Ss 14:26 0:27 /usr/bin/nmbd -F root 9819 0.0 0.3 4360 448 ? S 14:29 0:00 avahi-daemon: running [Skynet.local] http 9857 0.0 0.0 10036 88 ? S< 14:29 0:00 nginx: worker process root 9959 0.0 0.2 66236 244 ? Ssl 14:31 0:03 /var/packages/SurveillanceStation/target/sbin/sscored root 10277 0.2 0.9 148472 1172 ? Ssl 14:38 0:18 /var/packages/SynoFinder/target/sbin/synoelasticd root 10796 0.0 0.2 60680 300 ? Ssl 14:49 0:01 /var/packages/SurveillanceStation/target/sbin/sslogd root 10929 0.0 0.2 91428 312 ? Ssl 14:52 0:02 /var/packages/SurveillanceStation/target/sbin/ssnotifyd root 11558 0.0 0.2 84696 244 ? Ssl 15:05 0:00 /var/packages/SurveillanceStation/target/sbin/ssroutined Downloa+ 11582 0.1 0.3 57696 404 ? Ss 15:05 0:05 /var/packages/DownloadStation/target/sbin/scheduler postgres 11594 0.1 0.1 52408 128 ? Ss 15:06 0:08 postgres: DownloadStation download [local] idle postgres 11684 0.0 0.1 52288 128 ? Ss 15:08 0:00 postgres: DownloadStation download [local] idle Downloa+ 11695 0.0 0.1 27684 168 ? Ss 15:08 0:00 /var/packages/DownloadStation/target/sbin/synodldbrpcd postgres 11708 0.2 0.1 52388 128 ? Ss 15:08 0:09 postgres: DownloadStation download [local] idle root 11770 0.0 0.1 5964 168 pts/2 S 15:09 0:00 sudo sh root 11788 0.0 0.6 5448 788 pts/2 S 15:09 0:00 sh root 11802 0.0 0.3 70584 456 ? Ssl 15:10 0:02 /var/packages/SurveillanceStation/target/sbin/ssrotated root 11899 0.0 0.2 41276 348 ? S<s 15:12 0:01 /var/packages/SurveillanceStation/target/sbin/ssfindhostd root 12038 0.1 0.4 70496 536 ? Ssl 15:14 0:05 /var/packages/SurveillanceStation/target/sbin/ssactruled root 12078 0.0 0.1 41148 188 ? Ss 15:15 0:00 /var/packages/SurveillanceStation/target/sbin/ssrtpdataproviderd root 12141 0.0 0.2 41276 284 ? Ss 15:17 0:00 /var/packages/SurveillanceStation/target/sbin/ssrtspserverd root 12518 0.1 0.4 78560 588 ? Ssl 15:24 0:04 /var/packages/SurveillanceStation/target/sbin/ssdaemonmonitord root 13255 0.0 0.0 0 0 ? S 15:40 0:00 [flush-9:0] root 15123 0.0 1.0 5336 1220 pts/2 R+ 16:26 0:00 ps aux J'ai remarqué que depuis environ 20 minutes sabnzbd est monté à fond niveau CPU, mais il semble être redescendu maintenant ... 0 Citer
Fenrir Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 (modifié) il y a 5 minutes, Minada a dit : sabnzbd 8844 18.8 21.9 267456 25972 ? Sl 14:10 25:28 /usr/local/sabnzbd/env/bin/python /usr/local/sabnzbd/share/SABnzbd/SABnzbd.py -f /usr/local/sabnzbd/var/config.ini --pidfile /usr/local/sabnzbd/var/sabnzbd.pid -d Arrête ce paquet (ou kill le process) et regarde si ça va mieux après edit : je n'avais pas vu ta remarque, coupe le tout de même Modifié le 30 avril 2017 par Fenrir 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 (modifié) Ok, ça semble m'avoir rendu la main, j'ai pu accéder à l'interface DSM en moins de 10 secondes et j'arrive à charger le lecteur réseau ! C'est étrange car je pense que le problème initial ne venait pas de lui mais plutôt de l'indexation des photos ... Il a probablement dû attendre une semaine avant de réussir à faire son job une fois que j'ai déplacé les photos ... Par contre j'ai toujours les disques en accès selon leur LED de status. Je vais monitorer l'évolution de la situation et faire les mises à jour puis remettre progressivement mes photos dans leur répertoire ... Pourtant Photo Station est arrêté chez moi, l'indexation devrait l'être aussi ! Merci pour les conseils et je vous tiens au courant d'ici ce soir si la situation reste stable :) Modifié le 30 avril 2017 par Minada 0 Citer
Fenrir Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 L'indexation n'est pas uniquement liée à photostation. 0 Citer
Einsteinium Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 Comportement étrange pour SABnzbd surtout, stop ce paquet avant qu'il ne se relance. 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 C'est fréquent que SABnzbd prenne beaucoup de ressources, quand il y a des gros fichiers à réparer en PAR ... 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Bon, après une redémarrage le problème est revenu, j'ai à nouveau kill le process sabnzbd mais ça n'a pas suffi. Du coup je me suis rappelé que j'avais fait une manipulation tout à l'heure pour arrêter l'indexation : /usr/syno/sbin/synoservice --hard-stop synoindexd /usr/syno/sbin/synoservice --hard-stop synomkthumbd Immédiatement après avoir fait ça, tout redevient normal. Comment faire pour cette indexation ? Si j'ai bien compris, elle se déroule uniquement quand j'ajoute de nouvelles photos, et des miniatures sont créées en même temps ce qui prend du temps et des ressources ? 0 Citer
Fenrir Posté(e) le 30 avril 2017 Posté(e) le 30 avril 2017 L'indexation prend le temps qu'il faut, mais s'il s'agit de photos, tu as un soft officiel permettant d'accéelerer certaines étapes : Citation Photo Station Uploader Photo Station Uploader est une application qui permet de transférer des photos et des vidéos en masse depuis votre ordinateur vers Photo Station. Elle crée des miniatures et convertit les vidéos en des formats de haute qualité grâce à la puissance de traitement de votre ordinateur, sans consommer les ressources système de votre NAS. Il suffit de sélectionner les fichiers dans l'explorateur de fichiers Windows ou le Finder de Mac et de cliquer sur le bouton droit pour procéder au transfert. Windows: Télécharger (exe) | MD5 Mac: Télécharger (dmg) | MD5 Mac (OS X 10.6 & 10.7): Télécharger (dmg) | MD5 Release Note https://www.synology.com/fr-fr/support/download/DS411j 0 Citer
Minada Posté(e) le 30 avril 2017 Auteur Posté(e) le 30 avril 2017 Parfait merci, je vais tester ça et voir si ça résout mon problème ! 0 Citer
Olivier Mathieu Posté(e) le 11 mars 2018 Posté(e) le 11 mars 2018 Bonjour je me permet de relancer ce fil de discussion car j'ai le même soucis. je n'ai plus accès à l'interface et aux service de mon syno 5 min après son démarrage !! Quand je me loge en Ssh c'est aussi très lent .... Les LED des disques n'arrêtent pas de clignoter .... voici mon "uptime" Citation 14:49:22 up 17 min, 1 user, load average: 33.67, 30.05, 18.9 et mon "ps aux" Citation USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.7 0.4 24864 4408 ? Ss 14:32 0:08 /sbin/init root 2 0.0 0.0 0 0 ? S 14:32 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S 14:32 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< 14:32 0:00 [kworker/0:0H] root 6 0.1 0.0 0 0 ? D 14:32 0:02 [kworker/u8:0] root 7 1.2 0.0 0 0 ? S 14:32 0:13 [migration/0] root 8 0.0 0.0 0 0 ? S 14:32 0:00 [rcu_bh] root 9 0.2 0.0 0 0 ? S 14:32 0:02 [rcu_sched] root 10 0.0 0.0 0 0 ? S 14:32 0:00 [watchdog/0] root 11 0.0 0.0 0 0 ? S 14:32 0:00 [watchdog/1] root 12 0.1 0.0 0 0 ? S 14:32 0:01 [migration/1] root 13 0.0 0.0 0 0 ? S 14:32 0:01 [ksoftirqd/1] root 14 0.2 0.0 0 0 ? R 14:32 0:03 [kworker/1:0] root 15 0.0 0.0 0 0 ? S< 14:32 0:00 [kworker/1:0H] root 16 0.0 0.0 0 0 ? S< 14:32 0:00 [khelper] root 17 0.0 0.0 0 0 ? S 14:32 0:00 [kdevtmpfs] root 18 0.0 0.0 0 0 ? S< 14:32 0:00 [netns] root 19 0.1 0.0 0 0 ? D 14:32 0:01 [kworker/u8:1] root 177 0.0 0.0 0 0 ? S< 14:32 0:00 [writeback] root 181 0.0 0.0 0 0 ? S< 14:32 0:00 [kintegrityd] root 182 0.0 0.0 0 0 ? S< 14:32 0:00 [bioset] root 183 0.0 0.0 0 0 ? S< 14:32 0:00 [crypto] root 185 0.0 0.0 0 0 ? S< 14:32 0:00 [kblockd] root 293 0.0 0.0 0 0 ? S< 14:32 0:00 [ata_sff] root 303 0.0 0.0 0 0 ? S< 14:32 0:00 [md] root 448 0.0 0.0 0 0 ? S< 14:32 0:00 [rpciod] root 449 0.1 0.0 0 0 ? S 14:32 0:02 [kworker/0:1] root 490 0.0 0.0 0 0 ? S 14:32 0:00 [khungtaskd] root 506 18.9 0.0 0 0 ? R< 14:32 3:21 [kswapd0] root 511 0.0 0.0 0 0 ? SN 14:32 0:00 [ksmd] root 513 0.0 0.0 0 0 ? S 14:32 0:00 [fsnotify_mark] root 515 0.0 0.0 0 0 ? S< 14:32 0:00 [nfsiod] root 2901 0.0 0.0 0 0 ? S< 14:32 0:00 [iscsi_eh] root 2939 0.0 0.0 0 0 ? S 14:32 0:00 [scsi_eh_0] root 2953 0.0 0.0 0 0 ? S 14:32 0:00 [scsi_eh_1] root 2971 0.0 0.0 0 0 ? D 14:32 0:00 [kworker/u8:2] root 3079 0.0 0.0 0 0 ? S 14:32 0:00 [scsi_eh_2] root 3228 0.0 0.0 0 0 ? S< 14:32 0:00 [raid5wq] root 3262 0.0 0.0 0 0 ? S< 14:32 0:00 [deferwq] root 3374 0.0 0.0 0 0 ? S 14:32 0:00 [khubd] root 3380 0.0 0.0 0 0 ? S 14:32 0:00 [kethubd] root 3549 0.1 0.0 0 0 ? S< 14:32 0:01 [kworker/0:1H] root 3550 0.1 0.0 0 0 ? S< 14:32 0:01 [kworker/1:1H] root 3553 0.0 0.0 0 0 ? S< 14:32 0:00 [bioset] root 3554 0.0 0.0 0 0 ? S 14:32 0:00 [md0_raid1] root 3572 0.0 0.0 0 0 ? S< 14:32 0:00 [bioset] root 3574 0.0 0.0 0 0 ? S 14:32 0:00 [md1_raid1] root 3712 0.0 0.0 0 0 ? S< 14:32 0:00 [ext4-group-desc] root 3713 0.0 0.0 0 0 ? S 14:32 0:00 [jbd2/md0-8] root 3714 0.0 0.0 0 0 ? S< 14:32 0:00 [ext4-dio-unwrit] root 3757 0.0 0.1 17272 1184 ? Ss 14:32 0:00 /usr/bin/cgmanager --sigstop system 3832 0.3 0.4 900720 4260 ? Ssl 14:32 0:03 /usr/bin/syslog-ng -F --worker-threads=2 -u system -g log root 4335 0.0 0.3 69584 3288 ? Ss 14:33 0:00 /usr/syno/sbin/synologaccd -f root 4471 0.0 0.0 13120 684 ? Ss 14:33 0:00 /sbin/dbus-daemon --system --nopidfile root 4476 0.0 0.0 13120 740 ? Ss 14:33 0:00 /sbin/dbus-daemon --session --fork --print-address root 4482 0.0 0.1 75008 1808 ? SNs 14:33 0:00 /usr/syno/bin/synologrotated root 4536 0.0 0.3 287428 2892 ? Ssl 14:33 0:00 /usr/syno/sbin/synoconfd -D root 4575 0.0 0.1 278072 1744 ? Ssl 14:33 0:00 /usr/syno/sbin/synonetd root 4711 0.0 0.0 0 0 ? S 14:33 0:00 [ecryptfs-kthrea] root 4862 0.0 0.0 17884 596 ? Ss 14:33 0:00 udevd --daemon root 5650 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/1:2] root 5660 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset] root 5943 0.2 0.0 0 0 ? S 14:33 0:02 [kworker/0:2] root 6077 0.0 0.1 12108 976 ? Ss 14:33 0:00 /usr/sbin/ovsdb-server /usr/syno/etc/synoovs/conf.db --remote=punix:/var/run/openvs root 6097 0.2 0.2 235180 1980 ? Ssl 14:33 0:02 /usr/sbin/ovs-vswitchd --pidfile --detach --log-file -v:syslog:off -vbond:file:warn root 6836 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset] root 6837 0.0 0.0 0 0 ? S 14:33 0:00 [md3_raid1] root 6848 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset] root 6851 0.0 0.0 0 0 ? S 14:33 0:00 [md2_raid1] root 7106 0.0 0.0 0 0 ? S< 14:33 0:00 [kdmflush] root 7109 0.0 0.0 0 0 ? S< 14:33 0:00 [bioset] root 7509 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-worker] root 7511 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-worker-hi] root 7512 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-delalloc] root 7513 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-flush_del] root 7514 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-cache] root 7515 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-submit] root 7516 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-fixup] root 7517 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio] root 7518 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-met] root 7521 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-met] root 7522 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-rai] root 7523 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-rmw] root 7524 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-endio-wri] root 7525 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-freespace] root 7526 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-delayed-m] root 7527 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-readahead] root 7528 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-reada-pat] root 7529 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-qgroup-re] root 7530 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-usrquota-] root 7531 0.0 0.0 0 0 ? S< 14:33 0:00 [btrfs-extent-re] root 7566 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/u8:3] root 7570 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/u8:4] root 7574 0.2 0.0 0 0 ? D 14:33 0:02 [kworker/u8:5] root 7870 0.0 0.0 0 0 ? S 14:33 0:00 [btrfs-cleaner] root 7876 0.0 0.0 0 0 ? S 14:33 0:00 [btrfs-transacti] root 8741 0.1 0.0 0 0 ? S 14:33 0:01 [kworker/u8:7] root 8784 0.0 0.1 76836 1580 ? Ss 14:33 0:00 /usr/syno/sbin/synocrond root 8785 0.0 0.0 85604 676 ? Ss 14:33 0:00 synostoraged root 8786 0.0 0.0 85604 688 ? S 14:33 0:00 /usr/syno/sbin/synostoraged root 8787 0.0 0.2 85604 1880 ? S 14:33 0:00 /usr/syno/sbin/synostoraged root 8809 0.2 0.6 226200 6436 ? Ss 14:33 0:02 /usr/bin/snmpd -fLn -c /etc/snmp/snmpd.conf -p /var/run/snmpd.pid 127.0.0.1:161 root 8847 0.0 0.3 114756 2888 ? Ss 14:33 0:00 /usr/syno/sbin/ddnsd root 8890 0.0 0.3 242076 3700 ? S<s 14:33 0:00 synoscgi root 8932 0.0 0.4 113988 3796 ? Ss 14:33 0:00 /usr/syno/sbin/synosnmpcd root 8939 0.0 0.2 112360 2344 ? Ss 14:33 0:00 /usr/syno/sbin/heartbeatd root 8983 0.0 0.0 194804 776 ? S<s 14:33 0:00 /usr/syno/bin/findhostd ntp 8993 0.0 0.1 96240 1608 ? Ssl 14:33 0:00 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u ntp:ntp root 9099 0.0 0.0 177836 792 ? Ss 14:33 0:00 /usr/bin/rsync --daemon system 9103 0.0 0.0 242076 272 ? S 14:33 0:00 synoscgi system 9104 0.0 0.0 242076 272 ? S 14:33 0:00 synoscgi system 9105 0.0 0.0 242076 272 ? S 14:33 0:00 synoscgi root 9189 0.0 0.3 82460 3352 ? Ss 14:33 0:00 /usr/bin/sshd root 9194 0.0 0.0 4188 200 ? Ss 14:33 0:00 /usr/bin/minissdpd -i ovs_eth0 root 9403 0.0 0.0 0 0 ? S 14:33 0:00 [scsi_eh_3] root 9404 0.0 0.0 0 0 ? S 14:33 0:00 [usb-storage] root 9610 0.0 0.0 0 0 ? D 14:33 0:00 [Syno_HDDMon] root 9682 0.0 0.2 6224 2324 ? SLs 14:33 0:00 /usr/bin/vmtouch -lfd /var/run root 9686 0.0 0.0 8584 580 ttyS0 Ss+ 14:33 0:00 /sbin/getty 115200 console root 9713 0.0 0.3 92352 2828 ? Ss 14:33 0:00 /usr/syno/bin/synobackupd root 9868 0.0 0.3 229708 3612 ? S<s 14:33 0:00 /usr/syno/sbin/synocgid -D root 9869 0.0 0.1 62356 1196 ? SNs 14:33 0:00 /usr/syno/sbin/synomkthumbd root 9870 0.0 0.1 62344 1196 ? SNs 14:33 0:00 /usr/syno/sbin/synomkflvd root 9905 0.0 0.1 89824 1800 ? Ss 14:33 0:00 /usr/syno/sbin/hotplugd root 9908 0.0 0.0 0 0 ? S 14:33 0:00 [RODSP_ODX_LOGIN] root 9909 0.0 0.0 0 0 ? S 14:33 0:00 [RODSP_VLUN_LOGI] root 9911 0.0 0.0 0 0 ? S 14:33 0:00 [RODSP_VDISK_LOG] root 9913 0.0 0.2 135316 1960 ? Ss 14:33 0:00 /usr/syno/bin/s2s_daemon -d root 9914 0.0 0.0 0 0 ? S< 14:33 0:00 [rodsp_aio] root 9926 0.0 0.0 0 0 ? S< 14:33 0:00 [target_completi] root 9929 0.0 0.0 0 0 ? S< 14:33 0:00 [tmr-rd_mcp] root 9930 0.0 0.0 0 0 ? S< 14:33 0:00 [xcopy_wq] root 9935 0.0 0.3 320544 2816 ? SNsl 14:33 0:00 /usr/syno/sbin/synocontentextractd root 9970 0.0 0.1 188800 1000 ? Ss 14:33 0:00 /usr/bin/ftpd -DS root 9976 0.1 0.1 93112 1648 ? SNsl 14:33 0:01 /usr/syno/sbin/synotifyd root 9980 0.0 0.1 111376 1832 ? S 14:33 0:00 /usr/bin/netatalk root 10094 0.0 0.3 246772 3248 ? SNsl 14:33 0:00 /usr/syno/bin/iscsi_snapshot_comm_core -D root 10102 0.0 0.3 99316 3260 ? SNs 14:33 0:00 /usr/syno/bin/iscsi_snapshot_server -D root 10162 0.0 0.3 191760 3332 ? S 14:33 0:00 /usr/bin/afpd -d -F /etc/afp.conf root 10163 0.0 0.3 87484 2836 ? S 14:33 0:00 /usr/bin/cnid_metad -d -F /etc/afp.conf root 10322 0.0 0.4 395088 4072 ? Ss 14:33 0:00 /usr/bin/smbd -F root 10341 0.0 0.0 0 0 ? S< 14:33 0:00 [cifsiod] root 10409 0.0 0.2 252732 2336 ? SNs 14:33 0:00 /usr/syno/sbin/synocontentextractd root 10410 0.0 0.0 246812 608 ? SNs 14:33 0:00 /usr/syno/sbin/synocontentextractd postgres 10434 0.0 0.1 155736 960 ? Ss 14:33 0:00 /usr/bin/postgres -D /var/services/pgsql root 10440 0.0 0.0 395068 412 ? S 14:33 0:00 /usr/bin/smbd -F root 10441 0.0 0.0 395060 376 ? S 14:33 0:00 /usr/bin/smbd -F root 10453 0.0 0.0 395092 512 ? S 14:33 0:00 /usr/bin/smbd -F root 10454 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F root 10455 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F root 10456 0.0 0.2 399476 2252 ? S 14:33 0:00 /usr/bin/smbd -F root 10457 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F root 10458 0.0 0.0 395092 368 ? S 14:33 0:00 /usr/bin/smbd -F postgres 10572 0.0 0.1 155868 1796 ? Ss 14:33 0:00 postgres: checkpointer process postgres 10573 0.0 0.0 155736 384 ? Ss 14:33 0:00 postgres: writer process postgres 10574 0.0 0.0 155736 416 ? Ss 14:33 0:00 postgres: wal writer process root 10748 0.1 0.2 44644 2564 ? S<s 14:33 0:01 nginx: master process /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_proce root 10818 0.0 0.1 62332 1084 ? SNs 14:33 0:00 /usr/syno/sbin/synoindexd root 10981 0.0 0.1 11720 1020 ? Ss 14:33 0:00 /bin/sh -e /proc/self/fd/9 root 10984 0.1 0.5 248668 4784 ? S 14:33 0:01 /usr/syno/sbin/synopkgctl wait --timeout 3600 --check_interval 10 bootup root 11512 0.0 0.1 72876 1792 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/PHP7.0/target/usr/local/etc/php70/php-fpm.co root 11635 0.0 0.0 7220 628 ? Ss 14:33 0:00 /usr/sbin/crond root 11650 0.2 0.3 776044 3368 ? Ssl 14:33 0:02 /usr/syno/bin/scemd root 11705 0.0 0.4 233756 3912 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/PHP5.6/target/usr/local/etc/php56/php-fpm.co root 11709 0.0 0.2 179828 1968 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/WebStation/target/misc/php70_fpm.conf) root 11760 1.4 0.7 257300 6616 ? SLl 14:33 0:13 /usr/syno/sbin/synorelayd root 11778 0.0 0.1 11716 1028 ? Ss 14:33 0:00 /bin/sh -e /proc/self/fd/9 root 11792 0.0 0.4 337108 3972 ? Ss 14:33 0:00 php-fpm: master process (/var/packages/WebStation/target/misc/php56_fpm.conf) root 11794 0.0 0.4 248760 3944 ? S 14:33 0:00 /usr/syno/sbin/synopkgctl start MailPlus-Server root 11845 0.0 0.2 415628 2116 ? Ssl 14:33 0:00 /var/packages/LogCenter/target/usr/bin/syslog-ng --cfgfile=/var/packages/LogCenter/ root 11857 0.0 0.2 62352 2508 ? SN 14:33 0:00 /usr/syno/sbin/synoindexscand root 11858 0.0 0.2 62332 2536 ? SN 14:33 0:00 /usr/syno/sbin/synoindexworkerd root 11860 0.0 0.4 292964 3764 ? SN 14:33 0:00 /usr/syno/sbin/synoindexplugind root 11861 0.0 0.2 110548 2620 ? SN 14:33 0:00 /usr/syno/sbin/synomediaparserd root 12219 0.0 0.0 253528 644 ? Ss 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer root 12225 0.0 0.0 250544 384 ? S 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer synocal+ 12233 0.0 0.1 233756 976 ? S 14:33 0:00 php-fpm: pool Calendar synocal+ 12234 0.0 0.1 233756 976 ? S 14:33 0:00 php-fpm: pool Calendar root 12245 0.0 0.0 343652 356 ? Sl 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer root 12250 0.0 0.0 343652 356 ? Sl 14:33 0:00 /var/packages/WebDAVServer/target/usr/bin/httpd -DSSL -f /var/packages/WebDAVServer root 12656 0.0 0.1 11920 1064 ? S 14:34 0:00 /bin/sh /usr/local/mariadb10/bin/mysqld_safe --datadir=/var/packages/MariaDB10/targ http 12849 0.0 0.0 14960 708 ? Ss 14:34 0:00 /var/packages/WebStation/target/usr/bin/multiwatch -f 2 -- /var/packages/WebStation mysql 12876 0.5 1.0 1391588 10016 ? Sl 14:34 0:04 /usr/local/mariadb10/bin/mysqld --basedir=/usr/local/mariadb10 --datadir=/var/packa http 12888 0.0 0.0 8420 268 ? S 14:34 0:00 /var/packages/WebStation/target/usr/bin/fcgiwrap http 12889 0.0 0.0 8420 268 ? S 14:34 0:00 /var/packages/WebStation/target/usr/bin/fcgiwrap root 13142 0.0 0.0 0 0 ? S< 14:34 0:00 [kworker/u9:1] root 13147 0.0 0.3 292068 3572 ? Ss 14:34 0:00 /var/packages/HyperBackupVault/target/bin/img_backupd root 13159 0.0 0.3 122324 3216 ? Ss 14:34 0:00 /usr/bin/upnpd root 13229 0.0 0.1 12868 1572 ? S 14:34 0:00 /bin/sh /var/packages/MailPlus-Server/scripts/start-stop-status start root 13366 6.3 1.2 457168 12072 ? Ssl 14:34 1:00 /var/packages/SynoFinder/target/sbin/synoelasticd root 13450 0.0 0.0 395092 360 ? S 14:34 0:00 /usr/bin/smbd -F root 13452 0.0 0.0 395092 364 ? S 14:34 0:00 /usr/bin/smbd -F root 13454 0.0 0.0 395092 372 ? S 14:34 0:00 /usr/bin/smbd -F root 13457 0.0 0.0 395092 364 ? S 14:34 0:00 /usr/bin/smbd -F root 13458 0.0 0.0 395092 360 ? S 14:34 0:00 /usr/bin/smbd -F root 13644 0.0 0.1 478996 1756 ? Ssl 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13647 0.0 0.0 405264 520 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13648 0.0 0.0 405264 520 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13658 0.0 0.1 342040 1856 ? SNsl 14:34 0:00 /var/packages/SynoFinder/target/sbin/fileindexd root 13663 0.0 0.4 255328 4536 ? S 14:34 0:00 /var/packages/SynoFinder/target/tool/appindex -a add -p /var/packages/SynoFinder/ta root 13664 0.0 0.1 319776 1108 ? S<s 14:34 0:00 /usr/local/bin/notification_send Synolog+ 13744 0.0 0.1 21152 1416 ? Ss 14:34 0:00 /var/packages/SynologyApplicationService/target/daemon/pgbouncer -q /var/packages/S root 13853 0.0 0.0 478996 528 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13854 0.0 0.0 478996 528 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13855 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13856 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13857 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13858 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13859 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13860 0.0 0.0 478996 524 ? Ss 14:34 0:00 /var/packages/FileStation/target/sbin/thumbd root 13929 0.0 0.3 913248 2900 ? Ssl 14:34 0:00 node VapidSendServer.js root 14065 0.0 0.0 99252 856 ? Ss 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/httpd22 http 14342 0.0 0.0 99252 384 ? S 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/httpd22 http 14344 0.0 0.0 99252 388 ? S 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/fcgi-pm http 14367 0.0 0.0 1363336 708 ? Sl 14:34 0:00 /var/packages/Apache2.2/target/usr/local/bin/httpd22 root 14889 0.1 0.0 0 0 ? S 14:34 0:01 [kworker/u8:10] root 15317 0.0 0.4 177288 4204 ? Ss 14:34 0:00 sshd: Olivier [priv] Downloa+ 15383 0.0 0.2 281856 2612 ? Ss 14:34 0:00 /var/packages/DownloadStation/target/sbin/scheduler postgres 15385 0.0 0.1 159608 1012 ? Ss 14:34 0:00 postgres: DownloadStation download [local] idle root 15394 0.0 0.0 177288 496 ? R 14:34 0:00 sshd: Olivier@pts/3 Olivier 15395 0.0 0.1 26072 1480 pts/3 Ss 14:34 0:00 -sh postgres 15419 0.0 0.1 159036 968 ? Ss 14:35 0:00 postgres: DownloadStation download [local] idle Downloa+ 15420 0.0 0.1 219336 1016 ? Ss 14:35 0:00 /var/packages/DownloadStation/target/sbin/synodldbrpcd root 15424 0.0 0.1 262584 1692 ? Ss 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-notifyd postgres 15426 0.0 0.1 159152 988 ? Ss 14:35 0:00 postgres: DownloadStation download [local] idle root 15429 0.0 0.1 391088 1724 ? SNsl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-vmtouchd root 15445 0.0 0.2 436044 2500 ? Ssl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-cached root 15450 0.0 0.0 26508 500 ? Ss 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-authd root 15458 0.0 0.3 271700 2800 ? Ssl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/cloud-cleand root 15464 0.6 0.6 559512 6084 ? Ssl 14:35 0:05 /var/packages/SynologyDrive/target/sbin/syno-cloud-clientd root 15488 0.0 0.2 307540 2748 ? Ss 14:35 0:00 /var/packages/SynologyDrive/target/sbin/syncd root 15490 0.0 0.3 1050332 3368 ? Sl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/syncd root 15492 0.0 0.3 947932 2960 ? Sl 14:35 0:00 /var/packages/SynologyDrive/target/sbin/syncd root 15613 0.3 0.7 284420 7184 ? Dl 14:35 0:03 python2.7 /usr/bin/twistd caldav -f /var/packages/CardDAVServer/target/etc/syno_cal root 15634 0.1 0.0 0 0 ? D 14:35 0:01 [kworker/u8:11] postgres 15640 0.0 0.3 159528 2796 ? Ss 14:35 0:00 postgres: postgres caldav [local] idle root 15750 0.0 0.1 561268 1856 ? Ssl 14:35 0:00 synoscgi --m http 15890 0.7 1.1 351308 10508 ? D 14:35 0:06 php-fpm: pool www MailPlu+ 15938 0.1 0.1 34952 1188 ? S<sl 14:35 0:01 /var/packages/MailPlus-Server/target/usr/bin/redis-server *:8500 MailPlu+ 16026 0.0 0.0 329036 736 ? Ssl 14:35 0:00 /var/packages/MailPlus-Server/target/usr/bin/memcached -I 7m -u MailPlus-Server -p root 16029 0.7 0.5 312176 4892 ? S<sl 14:35 0:06 /var/packages/MailPlus-Server/target/usr/bin/syno-mailplus-server-go-utils --ca-dir root 16156 1.1 0.3 212804 3024 ? S 14:35 0:09 /bin/python2.7 /usr/bin/twistd -u root -g root --reactor=select -n caldav -f /var/p root 16157 1.1 0.8 212420 8296 ? D 14:35 0:09 /bin/python2.7 /usr/bin/twistd -u root -g root --reactor=select -n caldav -f /var/p root 16685 0.0 0.1 417096 1212 ? Ssl 14:36 0:00 synoscgi --m root 16689 0.0 0.0 343364 588 ? Ss 14:36 0:00 synoscgi --m root 16690 0.0 0.0 343364 592 ? Ss 14:36 0:00 synoscgi --m root 16696 0.0 0.3 912756 2928 ? Ssl 14:36 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node /var/packages/Spreadsheet/target root 16705 0.0 0.3 1016480 2988 pts/24 Ssl+ 14:36 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node --max_old_space_size=1024 /var/p root 16712 0.1 0.3 950880 2992 pts/26 Ssl+ 14:36 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node --max_old_space_size=1024 /var/p root 16725 0.1 0.3 954864 2984 pts/27 Ssl+ 14:36 0:01 /var/packages/Node.js_v4/target/usr/local/bin/node --max_old_space_size=1024 /var/p root 16944 0.1 0.3 917232 2848 ? Sl 14:36 0:00 /volume1/@appstore/Node.js_v4/usr/local/bin/node /volume1/@appstore/Spreadsheet/ser http 17188 0.5 0.7 354452 6652 ? D 14:36 0:04 php-fpm: pool www root 18045 0.0 0.0 561268 568 ? Ss 14:37 0:00 synoscgi --m system 18095 0.0 0.0 242076 260 ? S 14:37 0:00 synoscgi http 18310 0.5 1.1 354784 10824 ? D 14:37 0:04 php-fpm: pool www root 18380 0.0 0.3 556904 3684 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-task-center postgres 18383 0.0 0.3 159040 2852 ? Ss 14:37 0:00 postgres: SynologyMoments synophoto [local] idle root 18443 0.0 0.1 73080 1036 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-thumb root 18449 0.0 0.1 75668 1524 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-geocoding root 18451 0.0 0.1 75668 1544 ? SNsl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-face-extraction root 18453 0.0 0.1 75668 1536 ? SNsl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-concept root 18454 0.0 0.1 75668 1528 ? Ssl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-person-clustering http 18564 0.6 1.0 350852 9992 ? D 14:37 0:04 php-fpm: pool www Synolog+ 18671 0.0 0.1 342848 1736 ? S<sl 14:37 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-thumbnail-provider postgres 18673 0.0 0.0 158908 804 ? Ss 14:37 0:00 postgres: SynologyMoments synophoto [local] idle root 18810 0.0 0.1 558560 1204 ? Ssl 14:38 0:00 synoscgi --m root 18813 0.0 0.0 484828 588 ? Ss 14:38 0:00 synoscgi --m root 18814 0.0 0.0 484828 592 ? Ss 14:38 0:00 synoscgi --m root 18988 0.0 0.1 125244 1392 ? S<sl 14:38 0:00 /var/packages/SynologyMoments/target/usr/sbin/synophoto-user-check http 19011 0.0 0.1 42596 1580 ? S< 14:38 0:00 nginx: worker process is shutting down http 19118 0.3 1.2 346700 12012 ? D 14:38 0:02 php-fpm: pool www http 19184 0.3 1.0 346000 10140 ? D 14:38 0:02 php-fpm: pool www root 19286 0.0 0.1 285476 968 ? S< 14:38 0:00 /var/packages/MailPlus-Server/target/bin/syno_action antivirus anti_virus_quarantin root 19287 0.0 0.1 12280 1144 ? Ss 14:38 0:00 /bin/sh /var/packages/MailPlus-Server/target/scripts/daemon/clamav.sh update_local_ root 19308 0.0 0.4 269376 3824 ? S 14:38 0:00 /var/packages/MailPlus-Server/target/bin/syno_anti-virus update root 19330 1.4 5.5 319640 51424 ? D 14:38 0:09 freshclam root 19391 0.0 0.1 269376 1044 ? S 14:38 0:00 /var/packages/MailPlus-Server/target/bin/syno_anti-virus start root 19486 0.0 0.0 561268 488 ? Ss 14:39 0:00 synoscgi --m root 19598 1.2 1.2 338076 11628 ? D 14:39 0:07 clamd root 20008 0.0 0.0 0 0 ? S< 14:40 0:00 [kworker/u9:2] http 20196 0.3 1.2 345972 11180 ? D 14:40 0:01 php-fpm: pool www http 20210 0.3 1.1 346508 10692 ? D 14:41 0:01 php-fpm: pool www http 20436 0.4 1.1 345972 11048 ? D 14:41 0:02 php-fpm: pool www root 20493 0.0 0.0 10668 308 ? Ss 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam root 20495 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam root 20496 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam root 20497 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam root 20498 0.0 0.0 10668 4 ? S 14:41 0:00 /var/packages/MailPlus-Server/target/sbin/saslauthd -a pam root 21174 0.0 0.1 285476 968 ? S< 14:42 0:00 /var/packages/MailPlus-Server/target/bin/syno_action antivirus anti_virus_quarantin root 21177 0.0 0.1 12280 1148 ? Ss 14:42 0:00 /bin/sh /var/packages/MailPlus-Server/target/scripts/daemon/clamav.sh update_local_ root 21182 0.0 0.4 269376 3824 ? S 14:42 0:00 /var/packages/MailPlus-Server/target/bin/syno_anti-virus update root 21193 1.6 2.5 319640 23272 ? D 14:42 0:07 freshclam root 21252 0.0 0.0 0 0 ? S 14:43 0:00 [kworker/0:0] MailPlu+ 21253 0.0 0.0 271432 708 ? Ss 14:43 0:00 /var/packages/MailPlus-Server/target/sbin/syno_mailserver_notifierd http 21341 0.3 1.1 346508 10644 ? D 14:43 0:01 php-fpm: pool www root 21440 0.0 0.0 0 0 ? S 14:43 0:00 [kworker/1:1] root 21842 0.0 0.2 93432 2492 ? Ss 14:44 0:00 /var/packages/MailPlus-Server/target/libexec/master -w MailPlu+ 21852 0.0 0.3 271732 3152 ? Ds 14:44 0:00 /var/packages/MailPlus-Server/target/sbin/syno_mailloggerd -p 5 http 21856 0.3 1.2 345972 11324 ? D 14:44 0:01 php-fpm: pool www postfix 21879 0.0 0.3 93512 3088 ? S 14:44 0:00 pickup -l -t fifo -u postfix 21881 0.0 0.3 93696 3104 ? S 14:44 0:00 qmgr -l -t fifo -u root 21985 0.5 0.7 323416 7224 ? Ss 14:44 0:01 synoscgi_SYNO.Core.Package.Server_1_check root 22018 0.0 0.0 0 0 ? Zs 14:44 0:00 [SYNO.Core.UserS] <defunct> http 22250 0.2 0.7 342276 7188 ? D 14:45 0:00 php-fpm: pool www root 22312 0.0 0.0 32904 816 ? S<sl 14:45 0:00 /var/packages/MailPlus-Server/target/usr/bin/redis-server *:8505 system 22545 0.0 0.0 242076 360 ? S 14:45 0:00 synoscgi root 22719 0.7 0.3 1088780 3096 pts/14 Ssl+ 14:46 0:01 npm http 22865 0.0 0.2 44584 2304 ? S< 14:46 0:00 nginx: worker process is shutting down postgres 22934 0.0 0.2 159584 2668 ? Ss 14:46 0:00 postgres: postgres calendar [local] idle root 23069 0.4 0.3 918148 3084 pts/14 Sl+ 14:46 0:00 /var/packages/Node.js_v4/target/usr/local/bin/node push_server.js postgres 23127 0.0 0.1 255880 1816 ? Ss 14:46 0:00 ./reminderd MailPlu+ 23336 0.0 0.1 39440 1124 ? Ssl 14:47 0:00 /var/packages/MailPlus-Server/target/sbin/opendkim -x /var/packages/MailPlus-Server http 23353 0.1 1.1 340644 10320 ? D 14:47 0:00 php-fpm: pool www root 23354 0.0 0.2 836240 1940 ? D<s 14:47 0:00 rspamd: main process MailPlu+ 23357 0.4 0.7 908432 7132 ? S< 14:47 0:00 rspamd: rspamd_proxy process MailPlu+ 23358 0.4 0.5 911260 4852 ? D< 14:47 0:00 rspamd: controller process MailPlu+ 23359 0.4 0.4 935056 4452 ? S< 14:47 0:00 rspamd: normal process MailPlu+ 23360 0.4 0.4 937104 4624 ? S< 14:47 0:00 rspamd: normal process MailPlu+ 23361 0.3 0.2 860816 2488 ? S< 14:47 0:00 rspamd: hs_helper process MailPlu+ 23613 1.1 4.1 132280 38460 ? S< 14:48 0:01 /var/packages/MailPlus-Server/target/bin/mimedefang-multiplexor -U MailPlus-Server MailPlu+ 23615 0.0 0.0 16724 376 ? S<l 14:48 0:00 /var/packages/MailPlus-Server/target/bin/mimedefang -U MailPlus-Server -z /var/run/ root 23629 0.0 0.0 0 0 ? S 14:48 0:00 [kworker/0:3] MailPlu+ 23635 0.0 4.0 132280 37472 ? S< 14:48 0:00 /var/packages/MailPlus-Server/target/bin/mimedefang-multiplexor -U MailPlus-Server root 23650 0.4 1.0 319020 9808 ? Ss 14:48 0:00 /usr/bin/nmbd -F root 23812 0.0 0.1 25116 1540 ? S 14:48 0:00 avahi-daemon: running [Dracstation.local] MailPlu+ 23954 0.0 0.2 39576 1980 ? S<sl 14:48 0:00 /var/packages/MailPlus-Server/target/sbin/opendkim -x /var/packages/MailPlus-Server MailPlu+ 24007 0.0 0.0 33636 668 ? S<sl 14:48 0:00 /var/packages/MailPlus-Server/target/sbin/opendmarc root 24059 0.0 0.2 12484 2332 ? S< 14:49 0:00 /bin/sh /var/packages/MailPlus-Server/target/scripts/daemon/dovecot.sh restart MailPlu+ 24141 0.0 0.5 282168 4788 ? Ss 14:49 0:00 /var/packages/MailPlus-Server/target/sbin/syno_mailserverd http 24188 0.0 0.2 44648 2324 ? S< 14:49 0:00 nginx: worker process http 24189 0.0 0.2 44648 2552 ? S< 14:49 0:00 nginx: worker process root 24359 0.0 0.2 69316 1968 ? S<s 14:49 0:00 /var/packages/MailPlus-Server/target/sbin/dovecot root 24371 0.0 0.3 67156 3636 ? S< 14:49 0:00 dovecot/anvil root 24372 0.0 0.4 67288 3856 ? S< 14:49 0:00 dovecot/log root 24374 0.0 0.6 88616 5944 ? S< 14:49 0:00 dovecot/config root 24428 0.2 1.1 137276 10576 ? S 14:49 0:00 /usr/bin/php -dopen_basedir=/ /usr/syno/bin/codesign.php --addserver /tmp/keyringWD root 24434 0.0 0.1 11732 1424 ? S 14:49 0:00 sh -c synowebapi --exec api=SYNO.Core.Storage.Volume method=list version=1 limit=-1 root 24435 0.5 0.9 298000 8692 ? Ds 14:49 0:00 synowebapi --exec api=SYNO.Core.Storage.Volume method=list version=1 limit -1 offse root 24455 0.0 0.1 136180 1036 ? D 14:49 0:00 /var/packages/MailPlus-Server/target/bin/syno_action setSpamRuleUpdateTask 0 root 24469 0.5 0.1 172200 1312 ? D< 14:49 0:00 /var/packages/MailPlus-Server/target/bin/syno_mailserver_backend --getConfKeyVal po Olivier 24470 6.0 0.1 27740 1484 pts/3 R+ 14:49 0:00 ps aux merci par avance 0 Citer
Messages recommandés
Rejoindre la conversation
Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.